Availability of Wiring Adapter to Convert 12-Pin NATO Trailer Connector to 7-Way Blade Style
Question:
I have a millitary trailer that has a 12 pin nato male plug. Do you sell an adapter that will go from 12 pin male to a 7 flat blade that will go into my pickup truck? Thank You for your help
asked by: Wayne A
Expert Reply:
We do not offer any adapters to convert a 12-pin military trailer connector to a 7-way RV-style plug like that on part # H20043 but we can help you gather the parts you'll need to wire in a new trailer plug to match that on your pickup. We can also offer you an easier alternative.
To re-wire the trailer conector you'll need a wiring junction box # 38656, a trailer-side plug like the 4-foot # H20043 (or longer versions such as 6-foot # H20044 or 8-foot # H20046) and ring terminals like # DW05702-1 and # 44-5310A to make those connections inside the box. You will also need a vehicle to vehicle converter # 118158 to separate out the stop and turn signals from the 7-way, which are combined onto the same circuit on the truck. You can mount the converter inside the junction box. The truck left turn/stop and right turn/stop circuits (and ground) will connect to the yellow, green and white wires, respectively, on the left side of the converter. Use butt connectors # 05731-5 to make those wiring connections.
You will want to carefully review the functions on each wire on your trailer plug. Wire colors are NOT a reliable method for matching up the circuits/functions. You can refer to the linked article on trailer wiring for the functions carried on your 7-way and to the linked NATO document for the trailer's wiring functions. Match wires by function, not by color.
Or, if you want an easier and lower cost solution you could install a stand-alone trailer lighting kit like # TLL9RK and simply use an adapter like # PK12716 to connect it to your 7-way. For this method these are the only parts you need for lighting on the trailer.
Products Referenced in This Question
16-14 Gauge Butt Connector - 5 Pack
- Wiring
- Wire Connectors
- Butt Connectors
- 16-14 Gauge
- Deka
more information >
Vehicle to Vehicle Tail Light Converter
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- 7 Round
- Tow Ready
more information >
Ring Terminal - 12-10 Gauge Wire - 3/16" Ring ID
- Wiring
- Wire Connectors
- Ring Terminals
- 3/16 Inch Diameter
- 12-10 Gauge
- Flint Hill Goods
more information >
Ring Terminal -16-14 Gauge - 1/4" Ring ID - Qty. 1
- Wiring
- Wire Connectors
- Ring Terminals
- 1/4 Inch Diameter
- 16-14 Gauge
- Deka
more information >
7-Way Molded Trailer Wire Connector, 6' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 6 - 10 Feet Long
- Plug and Lead
- 7 Round - Blade
- Hopkins
more information >
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 6 - 10 Feet Long
- Plug and Lead
- 7 Round - Blade
- Hopkins
more information >
Pollak 7 Pole to 4 Way Connector Adapter
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 7 Round - Blade
- Plug Only
- 4 Flat
- Pollak
more information >
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Reflector
- Stop/Turn/Tail
- Square
- Kit
- Surface Mount
- Submersible Lights
- LED Light
- 5L x 5W Inch
- Red
- Optronics
more information >
Product Page this Question was Asked From
7-Way Molded Trailer Wire Connector, 4' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 7 Round - Blade
- Hopkins
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: Trailer Wiring Junction Box
- Shop: Pollak 7 Pole to 4 Way Connector Adapter
- Shop: Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi
- Search Results: stl72rb
- Shop: Ring Terminal -16-14 Gauge - 1/4" Ring ID - Qty. 1
- Search Results: k68~001~00
- Shop: Dexter BrakeRite Electric Over Hydraulic Actuator for Disc Brakes - Vented - 1,500 psi
- Search Results: 2x4 stake pocket
- Shop: 7-Way Molded Trailer Wire Connector, 4' Long
- Search Results: k71~651~00
- Q&A: Could a 7-pin European Connector be Adapted to a Nato 12 Pin Trailer Connector
- Q&A: Trailer Hitch Receiver Needed for 2008 Chevy Express Van 3500 Cutaway
- Video: Optronics Trailer Lights - Tail Lights - TLL9RK Review
- Search Results: rm~146~7
- Search Results: 7 pole round
- Search Results: electric over hydraulic actuator
- Q&A: Identifying Circuits of 7-Way on Trailer to Rewire New Connector
- Q&A: Motor Runs on Brake Rite EHB Electric Over Hydraulic Actuator but Does Not Build Pressure
- Q&A: Choosing Between Painted or GAL-DEX Coated Version of Dexter Trailer Hub
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class