Can a 513 Pound Motorcycle Be Carried on a Trailer Hitch Mount Carrier on a 2001 Subaru Forester
Question:
I need to transport a 513 lb motorcycle across the States... Im trying to figure out the hitches capacity for my 01 Forrester. I see that the tongue capacity is 350lbs, just to confirm does this mean that I cannot put the dead weight of my motorcycle onto it using a motorcycle carrier that is completely off the ground? Thus limiting me to a motorcycle carrier/trailer with wheels to distribute the weight?
asked by: Josh
Expert Reply:
You are correct. The highest tongue weight capacity of a trailer hitch for the 2001 Subaru Forester is 350 pounds for hitch # C12038. The combined weight of the carrier and the bike would have to be under 350 pounds.
The best option and the safest is to use a small trailer or one specifically designed for a motorcycle. You will also need a ball, ball mount, and wiring. The recommended ball mount is # C45503. You also need pin and clip # F-4.
For a 1-7/8 inch diameter ball use # A-80 and for a 2 inch use # A-82. And for trailer wiring you can use Tow Ready harness # 118461. I have linked videos showing installation of the hitch and wiring for you.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Class II Drawbar - 3/8" Rise, 1" Drop - 7-13/16" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 1 Inch
- Rise - 1 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is Included with Curt Trailer Hitch 12038 for a 2008 Subaru Forester
- Q&A: Hitch Pin Recommendation for a Curt Ball Mount C45503
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Hitch Receiver Sizes
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Awning for Sunray Sport Trailer
- Q&A: Adding 7-Way Connector to 2018 Subaru Forester with Existing 4-Way
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What is Speed Rating for CE Smith Multi Sport Boat/Kayak Trailer CE48870 and Can it Be Increased
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Do Smaller Trailers with Single Axles Come with Brakes Installed