What Metal is the Replacement Handle part # 158-100 Made of

Question

Question:

is this handle in aluminium.

asked by: Harry R

0

Expert Reply:

The handle part # 158-100 that you referenced is a zinc coated steel.

expert reply by: Jameson C

0

Answer 1

Yes, we have some parts that can help. We have the Replacement Handle Assembly for Polar Cam-Action Latch Kits - Zinc-Plated Steel #158-100. And the Handle Assembly for Polar Cam-Action Latch Kits - Aluminum #PLR158-100-A. Lastly the Replacement…

view full answer...

Answer 2

If you need the whole assembly and it is a cam-style door then #305736 is a good option. I have linked a video for you. We have some other handles depending on what you need. I have included a link to them for you. If you just need the handle that…

view full answer...

Answer 3

The Ramp Door Hinge #PLR1902 that you referenced could swing out as far as you are needing so it would work well for you. The slide door bar lock assembly part #305736 can also be cut down as needed as well. Then for a mechanism to lock the door open…

view full answer...

Answer 4

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 6

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 7

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

What Metal is the Replacement Handle part # 158-100 Made of

Product Page this Question was Asked From

Continue Researching