How to Pick Out Replacement Hubs for a Haulmark Low Hauler
Question:
I am going to replace all 4 drums and hubs on my 2008 Haulmark Low Hauler. It has Dexter torsion axles with EZ lube. Is your part number AKHD-545-35-EZ-K the correct replacement. Thanks.
asked by: Linny
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
If your bearing numbers happen to be L68149 and L44649 then the part # AKHD-545-35-EZ-K that you referenced would be the correct hub.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Q&A: Correct Replacement for Tru-Ryde Hub/Drum RVD-H-545
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Bearing Kit and Tools to Install on 2014 Forest River R-Pod Travel Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Replacement Hub and Drum Assembly for Tru-Ryde RVD-H-545
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
- Q&A: Replacement Hub and Brake Assembly for AL-KO 8490
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3