Replacement Handle Recommendation for a Fulton XP 100 Jack

Question

Question:

I lost the handle on the fulton trailor jack 100 series is this part repacable.. It has came apart befor but could put it back together.. let me know soon as it is salmon seaSON.....

asked by: Tony I

0

Expert Reply:

For your Fulton XP 100 jack the correct replacement handle is the part # F0933301S00.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Thanks for the pictures! 2" hitches do not all have a 5,000 lbs capacity. The capacity varies by vehicle. That is an old Reese 06497 hitch and the sticker is correct. It does indeed top out at 3,500 lbs. It looks like this hitch came on all of…

view full answer...

Answer 6

We do have a couple Class V hitch options available for your 2020 F53 and I have 3 options listed below. These will all be rated to 16,000 pounds towing and 1,600 pounds of tongue weight and use a 2" receiver opening. They will all also fit a…

view full answer...

Answer 7

I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

view full answer...

Answer 8

The trailer hitches we have available for the 2014 GMC Savana Van are designed to fit the full size van model. To see if these will fit your Cutaway version, I just recommend taking a couple measurements on the vehicle's frame. The trailer hitch…

view full answer...

Replacement Handle Recommendation for a Fulton XP 100 Jack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching