Trailer Tire Recommendation for a 8 inch by 7 inch Steel Trailer Wheel # AM20021

Question

Question:

Which tire goes on these rims?AM20021

asked by: Sammy

0

Expert Reply:

The most popular tire we carry that people get with the Steel Trailer Wheel # AM20021 that has been confirmed as a fit is the Loadstar K399 Bias Trailer Tire # AM1HP28.

expert reply by: Jameson C

0

Answer 1

Yes, a 20x10x8 tire would fit on a 8" x 8.5" wheel. Generally as long as the tire's last number which is the rim size is the same as the size rim your trying to install the tire on it will fit.

view full answer...

Answer 2

The Steel Trailer Wheel part #AM20021 is just what you are looking for; it has the 8" diameter x 7" wide dimensions, 4 on 4" bolt pattern, and it's white in color.

view full answer...

Answer 3

There is an option for a 215/60-8 load range D bias trailer tire and 8" white wheel with a 4 on 4" bolt pattern, but they come separate so you'd need to get the tire mounted to the wheel. The correct parts for this are the following: -…

view full answer...

Answer 4

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 5

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 6

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 9

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Trailer Tire Recommendation for a 8 inch by 7 inch Steel Trailer Wheel # AM20021

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching