How to Pick Out Replacement Key for UWS Tool Box

Question

Question:

I purchased a used UWS toolbox with no keys. All I can determine is that it was made by Daws Manufacturing and the only numbers Ive found are 73011286. Can you help me get keys?

asked by: Russell S

0

Expert Reply:

I attached a link to a page that has all of the UWS toolbox keys we carry. On the core of the key there should be a number stamped in it that says CH506 (for example). You would then need the key # KEYCH506.

expert reply by: Jameson C

0

Answer 1

You're exactly on the money. To open the UWS Tool Box on your truck, you will want to get the replacement key #KEYCH506.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

To tow your 2014 Coachmen Clipper BH, you will need a Hitch #75270, Weight Distribution System #FA94-00-0600 and a Brake Controller #90885 to power your Clipper's Electric Drum Brakes. I recommend the Draw-Tite Hitch #75270 for your 2016 Honda…

view full answer...

Answer 4

I do have an option for you but I cannot advise you combine two hitch adapters together like the Roadmaster Hitch Extender part #RM-071 and the Roadmaster Dual Hitch Receiver Adapter part #RM-077-4 as this would be very unsafe. However, if you need…

view full answer...

Answer 5

You can install a stack cooler in your vehicle. The Class ratings are there as a reference point to a hitch Class. For example if someone has a Class III hitch they can look at coolers, see a Class III and say, hey, I have a Class III hitch so this…

view full answer...

Answer 6

My recommendation is to stay with the load range that your trailers axle is rated for and that matches the tires on your trailer. In this case a load range E trailer tire, like item #AM3H490, is rated for 1,650 lbs, which would be good for a single…

view full answer...

Answer 7

Sorry to hear about your troubles. I will be happy to help you find some replacement wheels and tires for your Yacht Club Jet Ski Trailer that are more reliable. I recommend the Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel item…

view full answer...

Answer 8

With weight distribution systems you can't really make tight turns while backing up. What we recommend is that if you are basically backing up in a straight line you can leave the spring bars on the system. But if you think you will end up…

view full answer...

Answer 9

I called my contact at Bearing Buddy and they told me that the seal ring included with the Spindle Grease Seal Set, part #BB60005 will work fine on your spindle that measures 1.25 inches diameter. This set includes the steel seal ring, O-ring, and…

view full answer...

Answer 10

The seal that your mentioned and seal set #RG06-050 have the same inner and outer diameters so yes, you can use set #RG06-050 in place of 17144.

view full answer...

Answer 11

The replacement seal for 17146 is Grease Seal - Double Lip, part #58846. This is a single lip grease seal with an inner diameter of 1.719 inches and an outer diameter of 2.565 inches that is intended for 3500-lb axles. It is sold as single units. I…

view full answer...

How to Pick Out Replacement Key for UWS Tool Box

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching