Trailer Tail Light Kit with Brake Lights and Turn Signals on the Same Circuit
Question:
I recently purchased a different trailer light kit and installed it on a small utility trailer. Only after installing it and finding that no lights worked did I notice a statement in the directions that stated something to the effect of If this light kit is used with a tow vehicle with a separate brake lamp from the turn indicators, you will need to buy an adapter.inch I know that every light and the wiring harness had good grounds, and that the vehicles electrical wiring is functioning properly, since a different light system worked on my truck 06 Toyota Tacoma w/ tow package the day before. So my question is: if I get this kit, will I experience the same difficulties or need additional equipment? Ive owned two other trailers and never had this problem, so this is a new one to me. Thank you!
asked by: Brent
Helpful Expert Reply:
Trailer tail light kit # TL29BK does work on a combined system meaning that the turn signals and brake lights are on the same circuit, which is what you want. You will not have the same issue with it.
Please note that this light kit has lights that ground through the mounting studs. The mounting surface must be clean and free of corrosion and avoid putting anything in between the light and the trailer frame.
If you do run into a ground problem then make sure that the vehicle side and trailer side connectors are clean and free of corrosion inside and out. The main connector grounds should be attached to clean and corrosion free bare metal surfaces.
If there is anything between a light ground and the metal trailer frame or if the trailer has an aluminum frame, tilt bed, or folding tongue, any of these things can interrupt the ground. Running jumper wires from the light grounds to the main trailer connector ground can help.
Product Page this Question was Asked From
Standard Trailer Light Kit with 25' Wire Harness
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Square
- Kit
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 5L x 4-1/2W Inch
- Red and Amber
- Optronics
more information >
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt Trailer Hitch Installation - 2019 Volkswagen Tiguan C13381
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2018 Volkswagen Tiguan
- Search Results: c56403
- Search Results: all647989
- Search Results: trim panel tool
- Shop: Trailer Hitch
- Video: Tekonsha T-One Vehicle Wiring Harness Installation - 2019 Volkswagen Tiguan
- Video: Stealth Hitches Hidden Rack Receiver Installation - 2021 Volkswagen Tiguan
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches Hidden Rack Receiver - 2" Ball
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2021 Volkswagen Tiguan
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Brophy Mounting Bracket for 4-Pole Flat Trailer Connector Review
- Video: Hopkins 4-Way Flat Trailer Connector Fold-Over Mounting Bracket Review
- Shop: Bauer Products 4-Way Trailer Plug Holder
- Shop: Vehicle Tow Bar Wiring
- Search Results: roadmaster brite lite wiring converter
- Search Results: rv wiring harness
- Shop: Vehicle Tow Bar Brake System
- Q&A: Difference Between 7-Way Round and 7-Way Blade Connectors
- Q&A: How Does Vehicle Being Flat Towed Steer
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 44649
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Search Results: 68149
- Q&A: Adding Brakes to a Mobile Home Axle