bing tracking image
Q & A Icon

Parts Needed to Flat Tow a 1999 Jeep Grand Cherokee  

Question:

I have a Jayco Eagle RV and want to two my jeep Grand Cherokee with all four wheels on the road. The Jeep is a 4 wheel drive automatic and the Jayco already has a tow hitch installed. What parts do I need to purcahse to complete the job. Any advise will be greatly received.

0

Expert Reply:

For your 1999 Jeep Grand Cherokee you will want to first start with a base plate kit. For that you would want the part # 1419-5 as it has been confirmed as a fit. I attached an install video for you to check out as well.

In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

For lighting you can use the bulb and socket kit, # RM-155, and not have to worry about cutting and splicing into the vehicle wiring.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the two vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by:
0
Jameson C

Products Referenced in This Question






Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>