Where to Connect the Stoplight Wire on Brake Controller Pigtail
Question:
Received Tekonsha brake control package, not clear on where to connect to stop light circuit. Information only goes to 2005. I am installing this on a 2006 Escape Hybrid.
asked by: Mike R
Expert Reply:
To install the Tekonsha PowerTrac Brake Controller # 39523 in your 2006 Ford Escape, the red wire on your brake controller harness # 20127 needs to be connected to the stoplight switch under the dash in your vehicle.
There should be a wire for the stoplight switch on the back of the brake pedal. You will want to use a circuit tester, like # PTW2993, to find the wire that has signal only when the brake pedal is depressed. Testing the wires is the best way to be sure which wire is the one you need to tap into.
A quick spice wire connector, like # SWC502905-1, can be used to splice the brake controller's pigtail wire into your vehicle's stoplight wire.
I have attached a diagram showing how the brake controller should be connected. I have also attached a help article on installing a brake controller for you.
Products Referenced in This Question
Tekonsha POD Trailer Brake Controller - 1 to 2 Axles - Time Delayed
- Trailer Brake Controller
- Time Delayed Controller
- Electric
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 2 Axles
- Indicator Lights
- Up to 360 Degrees
- Tekonsha
more information >
Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1
- Wiring
- Wire Connectors
- Quick Splice Connectors
- 18-16-14 Gauge
- Spectro
more information >
Product Page this Question was Asked From
Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller Installation: Starting from Scratch
- Search Results: etb7
- Shop: Jacketed 2 Wire (Brake Wire) - 12 Gauge - per Foot
- Video: Trailer Brake Controller Installation - 2012 Chevrolet Silverado 20127
- Search Results: etbc7
- Shop: Trailer Wiring
- Shop: Curt Echo Under-Dash Bluetooth Brake Controller w/ OneControl App - 1 to 4 Axles - Proportional
- Shop: Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Search Results: etbc7 kit
- Search Results: etbc7 wiring kit
- Search Results: how to install
- Video: Performance Tool Hook Probe Circuit Tester Review
- Video: Deka Wiring 12-2-1 Review
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Q&A: What is the Proper Gauge Wire for Installation of a Brake Controller and Trailer Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Power Wire Kit for Electric Trailer Brake Controllers - 12 Gauge
- Shop: Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4
- Video: Trailer Brake Controller Installation - 2017 Ford Escape
- Shop: Trailer Hitch
- Q&A: How To Find Cold Side Of Stop Light Switch On Vehicle For Brake Controller Installation
- Article: Trailer Wiring Diagrams
- Q&A: Where Does the Red Wire for a Brake Controller Attach to a Vehicle
- Video: Curt Spectrum Trailer Brake Controller Review
- Video: Choosing the Right Brake Controller
- Shop: Transmission Cooler
- Search Results: tekonsha primus
- Shop: RV Electrical
on Accessories and Parts
