bing tracking image
Q & A Icon

Troubleshooting Electric Over Hydraulic Actuator that Cycles Off and On Frequently  

Question:

Hello I own a Ford F450 Platinum 2013 and a 5th wheel Trilogy 42 ft long 2014 Last week had the drum brake removed and intalled disc brake Kodiac kit 13 in diam since both axles are 8000lbs. I notice when i got home that the pump was running on and off wondering why ? Coult it be air in my system . Pump Dexter Axle 1600 Thank you

0

Expert Reply:

When we see the problem you described with an electric over hydraulic actuator it is almost always because the brake controller being used is an integrated brake controller that is not designed to work with EOH actuators. If this problem persists the actuator can end up getting damaged.

For an aftermarket brake controller that is designed for EOH actuators that would work well I would recommend the Prodigy P2 # 90885. The correct install harness you would need is the part # 3034-P.

expert reply by:
0
Jameson C

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>