Camper Cover Recommendation for a Palomino Truck Bed Cover

Question

Question:

cannot fid them anywhere, except in a custom shop. Cover must fit camper when off truck, and collaped during storage

asked by: Paul G

0

Expert Reply:

As long as the length of your camper is between 8 and 10 feet (this is the distance in the bed of the truck and does not include the overhang), and the height is around 92 inches the part # CA80036 should fit and work well.

This cover is for storage purposes when the camper is not installed on a truck.

expert reply by: Jameson C

0

Answer 1

It looks like your 2016 Palomino Real Lite SS 1604 is almost 17 feet long, so the Classic Accessories Deluxe PolyPro III Heavy-Duty Truck Bed Camper Cover - 8' - 10' Long #CA80036 you were looking at would be a great choice. This cover is…

view full answer...

Answer 2

From information available to me online, it appears your 2016 Palomino SS-1240 truck camper has an overall length of 178" with 72" closed height. I recommend the Classic Accessories Deluxe PolyPro III Heavy-Duty Truck Bed Camper Cover,…

view full answer...

Answer 3

The Adco SFS AquaShed Truck Camper Cover - 16' Long - Gray #290-12262 has integrated cinching straps on the front and back to keep it nice and snug, so it will be the best one we currently have for your camper. We do technically have the Camco…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 7

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system it's…

view full answer...

Answer 8

Hi Tom, I have two options to replace the electric tongue jack on your Jayco Whitehawk: Option 1: Electric Jack w/ Footplate #EJ-3520-BBX. This jack is going to be your no-frills 'get the job done' style jack. It has a 3,500lb capacity and…

view full answer...

Answer 9

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

From end to end, the extendable arm measures 30-5/16 inches for the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches - Driver's Side #PVD20B.

view full answer...

Answer 12

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Camper Cover Recommendation for a Palomino Truck Bed Cover

Product Page this Question was Asked From

Continue Researching