bing tracking image
Q & A Icon

Should Landing Gear Drop Legs be Lowered First Before Using Motor to Level 5th Wheel Trailer  

Question:

When first dismountingthe truck should the front pin jacks be lowered so that the the jacks hit the ground at the same time

0

Expert Reply:

Before uncoupling a 5th wheel trailer from the truck you will need to have the jacks in position so that they are supporting the weight of the trailer. You may or may not have to use the drop legs on the jacks in a system like # LC358590 but doing so will reduce the amount of travel the jacks have to go thus reducing the amount of time it takes to get all the jacks into place.

What I would do is lower the jacks a little first using the motors and then use the drop legs to make contact with the ground. This will allow a little wiggle room should you need it. Otherwise you would not be able to power the legs up should you need to because the inner tube will already be retracted as far as it will go.

expert reply by:
0
Michael H

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.