bing tracking image
Q & A Icon

Wiring Brake Signal Wire to Combined Tow Light Harness on 2014 Honda CRV  

Question:

when connecting to add on harness with installed bulb and socket kit. do I cut the green and yellow and attach to diode or cut and attach brown brake wire and connect to diode.

1

Helpful Expert Reply:

You will want to cut the yellow and green wires and connect the ends with a yellow butt connector. Then attach a small length of wire to both butt connectors and attach the wires to the input of the diode with spade connectors and then attach the bare end of brake signal wire to the output of the diode with a spade connector. Then route the green brake signal wire through the firewall.

I have included a diagram of this installation for you to check out.

expert reply by:
1
Chris O
click to enlarge

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.