Recommended Replacement Endcap For Thule Roadway Hitch-Mounted Bike Rack

Question

Question:

Will this Thule endcap fit my Thule Roadway 915XT bike rack? Thanks.

asked by: Dennis H

0

Expert Reply:

The replacement endcap for your Thule Roadway, part # TH915XT is part # TH853-5570. These are sold individually and would work great for your bike carrier.

expert reply by: Jeffrey L

0

Answer 1

To see the dimensions of the Replacement Side End Cap #853-5567 see the pictures I attached.

view full answer...

Answer 2

In order to remove a Thule lock core you first need to make sure it is unlocked by the key that matches it. Then you will need to use the larger universal key which should have been included with your bike rack; if you don't have one then you can…

view full answer...

Answer 3

Thule and SportRack hitch pins use a different thread size so the two hitch pins are not interchangeable between the brands. Since you have a Thule you'd need the #THSTL2.

view full answer...

Answer 4

The etrailer Trailer Hitch Receiver #e98848 uses four 7/16-14 1-1/4" grade 8 carriage bolts to secure the receiver to the frame. This would require the Curt Fish Wire Bolt Leader - 7/16" #C58410 if that is all you are needing. If you would…

view full answer...

Answer 5

While not ideal to so after installing Trailer Hitch Receiver, #e98848, you should be just fine.

view full answer...

Answer 6

A stabilization strap like the Curt Cam Buckle Stabilizing Strap #18050 is sometimes used for additional support using bike racks on Class I hitches. They are not required necessarily but once were recommended for the Curt Trailer Hitch Receiver…

view full answer...

Answer 7

The etrailer.com Trailer Hitch Receiver #e98848 does require some fascia to be trimmed during installation (it's what allows for the hitch's sleek hidden design) and I can absolutely help you with this process. I have attached an image from…

view full answer...

Answer 8

To trim the bumper fascia on your 2019 Honda CR-V when installing the etrailer.com Trailer Hitch Receiver #e98848 you can use a pair of snips or simply a sharp utility knife. The material isn't too thick so it's not going to take a lot of…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Recommended Replacement Endcap For Thule Roadway Hitch-Mounted Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching