Fit of Swagman XTC2 # S64670 on a 2008 Toyota Rav 4

Question

Question:

Can I mount this rack on the back of a 2008 Toyota Rav4 with the spare tire on the back door?

asked by: DORIAN

0

Expert Reply:

The Swagman XTC2, part # S64670 is indeed a fit for your 3rd generation Rav4. If you click the link I provided, you can see the rack being test fit on a 2012 Rav 4, which is of the same generation as your 2008 model.

expert reply by: Mike L

0

Answer 1

I've never heard of not being able to remove the Allen bolt for the Swagman XC2 Bike Rack #S64650. The rack should have come with two wrenches, one of which is for that bolt. Some people have said that they can be tight, so the only advice I can…

view full answer...

Answer 2

If your bike is less than the maximum weight limit of the Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches - Frame Mount, part #S64650, it will not matter if your load your bike on the inside or the outside cradles of this hitch…

view full answer...

Answer 3

We do indeed have a hitch mounted bike rack that can carry two recumbent bikes, the Swagman XC-Extended Bike Rack for 2 Recumbent Bikes - 1-1/4" and 2" Hitches - Frame Mount #S64650-EXT. The rack can accommodate 2 recumbent bikes with…

view full answer...

Answer 4

Both the Swagman XC #S64650 and Curt C18084 platform-style hitch bike racks will fit the 1-1/4-inch Class I hitch made for your 2011 Kia Soul. Both also fit 2-inch hitches which makes them a good long-term choice for potential compatibility with…

view full answer...

Answer 5

Yes the Swagman XC-Extended Platform-Style 2 Bike Carrier, part #S64650-EXT would be great for carrying your recumbent bike. It has extended wheel platforms to accommodate bikes with a longer wheelbase such as recumbent bikes. The Swagman XC is…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Just looking at your Tern HSD bike with fenders, I'm going to say no the Saris MHS Bike Rack for 1 Bike #SAR23MR is not going to work. I did some research and it looks like a lot of Tern owner's went with the Hollywood Racks Sport Rider SE…

view full answer...

Answer 11

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Answer 12

Hello again Michelle. The Saris Glide EX Bike Rack #SA774 will indeed fit a 2023 Hyundai Tucson with a class 3 hitch. The tilt feature will allow the hitch to open and close normally. Saris bike racks are definitely good quality. They are all made…

view full answer...

Fit of Swagman XTC2 # S64670 on a 2008 Toyota Rav 4

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching