Recommended Replacement Brake Shoes For Hayes 10 Inch Electric Brakes

Question

Question:

Hello I can match up the brake assembly but then your site doesnt have any replacement shoes listed. Need shoes for AL-KO 10 x 2 1/4. Reference the complete assembly this question is coming from. Thanks

asked by: Larry W

0

Expert Reply:

The trailer brake shoes for the Hayes/ Al-KO electric brake assembly is part # BP04-100.

This set of shoes is 10 inch x 2-1/4 and is for one wheel, so if you need both sides you would need to adjust the quantity when ordering.

expert reply by: Jeffrey L

0

Answer 1

Since your drums are designed for 10" brakes, and it looks like you've got a 4400-lbs Dexter axle on your 2006 Jayco 12HW the replacement brakes you're looking for are the Dexter Electric Brake Kit for 4.4K Axles Manufactured Before May…

view full answer...

Answer 2

For your AL-KO T44 axles, the brake assemblies you need are the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4.4K #K23-478-479 or the manual adjust #K23-462-463-00 along with spoon adjuster #W80630. The…

view full answer...

Answer 3

The 10" x 2-1/4" Electric Brake Shoe/Lining #BP04-100 is the set you will need for an Hayes or AL-KO axle with electric brakes. The Kit #BP04-095 you found is for the Dexter axles as they did not change their parts when they acquired ALKO.

view full answer...

Answer 4

If your brake assembly was manufactured by Dexter, Fayette, or Foreman, the #BP04-095 brake shoes you referenced are indeed the correct replacement. They are the same shape and design as the original brake shoes. You can see a product description…

view full answer...

Answer 5

Tru-Ryde double-lip grease seal kit #RG06-050 will work as a replacement for Hayes seal 09103305 or Al-Ko seal 568861 since these parts all share the same inner diameter of 1.719-inches and the same outer diameter of 2.565-inches. Part #RG06-050 is a…

view full answer...

Answer 6

We have a grease seal that matches the dimensions you have on your trailer. The seal we offer is part #168233. This seal has a 1.688 inside diameter and 2.332 outside diameter. The race that is designed to work with the seal is part #L68110. We also…

view full answer...

Answer 7

For 4,400 AL KO trailer axles the correct replacement brake assemblies are part #K23-478-00 for the left hand side and part #K23-479-00 for the right hand side. It is much easier to just replace the assemblies instead of trying to individually…

view full answer...

Answer 8

Based on my research, it looks like your 2006 Rockwood Signature Ultra Lite camper has a tandem axle setup and the axles are 4,000 lb AL-KO torsion axles.There should be a label on the axle listing the manufacturer and the weight rating of the axle…

view full answer...

Answer 9

I would be happy to help! Since your brake assembly is stamped K23-462-00 you will want to go with the Dexter Electric Brake Assembly for 4.4K Axles #K23-462-00 and you can confirm that this is the correct assembly and not just an incorrect sticker…

view full answer...

Answer 10

The #K23-478-00 and #K23-479-00 Dexter brake assemblies you mentioned are not compatible with your AL-KO T-44 axle. According to my contact at Dexter (AL-KO was acquired by them), the replacement brake assemblies for your AL-KO axle are now obsolete…

view full answer...

Answer 11

To help you with replacement drums and brake assemblies, I need more information on your 2011 Keystone Outback 260FL. I need to either know the bearing numbers and seal number or know a few spindle dimensions. The bearing numbers can be found by…

view full answer...

Answer 12

For a 3500 lb axle, having a mounting bolt pattern of 2-7/8 inches is typical. The only exception would be for a few 4400 lb axles, which use a mounting bolt pattern of 2-13/16. I checked with Dexter Axle, and was told that the 69-47 designation…

view full answer...

Recommended Replacement Brake Shoes For Hayes 10 Inch Electric Brakes

Product Page this Question was Asked From

Continue Researching