Who Can Install Pop & Lock # PAL5500 Locking Tailgate Handle on 2015 Toyota Tacoma

Question

Question:

Once I purchase the lock . Where can I take my truck to get it installed ?

asked by: Lily F

0

Expert Reply:

The installation of the Pop & Lock is pretty simple. I've provided you with a copy of the instructions. You can look them over to see if this is something you'd feel comfortable trying for yourself. If you don't feel comfortable attempting the install yourself, any trusted mechanic should be able to complete the installation pretty quickly.

expert reply by: Mike L

0

click to enlarge

Answer 1

I do have a solution for you, however the Pop & Lock Custom Locking Tailgate Handle #PAL5500 referenced in your question is designed for the 2005-2015 Tacoma and is not compatible with your 2002 model. For your 2002 Toyota Tacoma, you will…

view full answer...

Answer 2

Pop and Lock does have the manual locking tailgate handle, #PAL5500, that will work with your 2015 Toyota Tacoma with backup camera. You can turn it into a power locking handle by adding conversion kit #PAL8525.

view full answer...

Answer 3

For your 2010 Toyota Tacoma Quad Cab, I would recommend using the Pop and Lock Custom Locking Tailgate Handle, #PAL5500. This tailgate lock includes a slot for the backup camera and is designed to give a factory look.

view full answer...

Answer 4

The Pop & Lock Custom Locking Tailgate Handle #PAL5500 that you referenced allows you to relocate the backup camera of the 2015 Tacoma to a new locking handle. It does not replace the backup camera so the quality of the camera does not change.

view full answer...

Answer 5

Yes, the backup camera on your 2011 Toyota Tacoma will be moved to the new tailgate lock if you choose to install the Pop and Lock Custom Tailgate Lock, #PAL5500. This lock has a slot specifically designed to house the camera.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

The Rhino Rack ROC25 part #RR46XR has a 165 lb dynamic weight capacity which means that's how much it can carry while travelling and incurring the standard bumps and movement that creates. While Rhino Rack doesn't give a static weight…

view full answer...

Answer 12

I reached out to Timbren, who told me the the actual jounce springs are both the same height at 3-3/4 inches, but the bracket height is different. So there aren't shorter springs, and the correct fit for your 2019 Toyota Tacoma 4WD is going to…

view full answer...

Who Can Install Pop & Lock # PAL5500 Locking Tailgate Handle on 2015 Toyota Tacoma

Product Page this Question was Asked From

Continue Researching