Safety Chain Tie Downs for Factory Prep Package on a 2014 Ram 3500

Question

Question:

2014 dodge ram 3500, can I buy just the chain connectors for my truck? I have the ball, this is fro the goose neck hitch, somebody wanted them more then me Thanks for your help in this matter

asked by: Michael T

1

Helpful Expert Reply:

Yes! For the safety chain loops only for the 2014 Ram 3500 with factory prep package you will need # C60617. They also come with the 4 pins you will need.

expert reply by: Michael H

1

Answer 1

The Fulton Safety Chain #FCHA0070324 will work with your 2017 Ram 3500 if the Safety Chain Loops #C60617 are installed in the truck bed's puck system.

view full answer...

Answer 2

You can use the Curt Saftey Chain Loops for Factory Ram Underbed Gooseneck Trailer Hitch #C60617 with your 2019 Ram 3500 (1 ton) truck with the factory pucks.

view full answer...

Answer 3

I sure can! The Lippert 1716 Pin Box #LC1324791 you were looking at measures 36.4" long and 14" tall as shown in the included diagram provided by Lippert.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Ted, so if you look in the bed of your truck and see 5 holes/pucks that would mean you have the OEM prep. I'd assume if you had it you'd have seen them by now. If you had it you'd only need a ball like the part #C60618. If you…

view full answer...

Answer 8

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 9

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...

Answer 10

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box part #GY58GR is primarily designed for long bed trucks. It's no different than a standard fifth wheel pin box in regards to the size. If you were using a fixed hitch and standard pin box before with…

view full answer...

Answer 11

Gen-Y's calculation for pin weight is a safe guess, but isn't the most accurate so the only way you'll get the correct capacity Gen-Y 5th Wheel Pin Box is to fully load the trailer and go to a commercial scale to measure the pin weight.…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Safety Chain Tie Downs for Factory Prep Package on a 2014 Ram 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching