Bearing Kit Recommendation that Include L44643 Bearings

Question

Question:

Will Bearing kit BK1-100 be the correct replacement for the Koyo bearing L44643R bearing. Thanks for the help.

asked by: Mike H

0

Expert Reply:

The bearing kit part # BK1-100 comes with two L44643 bearings like what you have and a grease seal # 24823 that has an inner diameter of 1.249 inches. If that is what you need then this would work well for you.

The R at the end of your bearing number just means it was used in a heavy duty application. The bearings included with this kit would work just fine.

expert reply by: Jameson C

0

Answer 1

Most of the 8-259 Dexter hubs use L44649 inner and outer bearings. For that you would need bearing kit #BK1-150. The seal included with this kit has an inner diameter of 1.50 inches. I have linked a video showing an example installation.

view full answer...

Answer 2

Since the Dexter 2,000 lb axle is very popular we know exactly what bearings it needs. The part #BK1-100 is a kit that includes the needed bearings of L44643, new races, and a seal.

view full answer...

Answer 3

I do have an option for you but I cannot give you exact bearing numbers for your trailer unless provided with spindle measurements or the trailer's VIN (if the manufacturer is still in business). I can however tell you that the two most…

view full answer...

Answer 4

I believe the bearing kit you will need will be part #BK1-100. However, I was unable to exactly cross reference your seal number. I recommend measuring your spindle to find the inner diameter of the seal you need, as well as measuring your seal to…

view full answer...

Answer 5

The bearing kit part #BK1-100 that you mentioned is the correct kit for a Dexter Torflex 2,000 lb axle like you have and the dimensions you mentioned match. Bearings can be a pretty tight fit on spindles so sometimes they can be somewhat challenging…

view full answer...

Answer 6

In order to confirm the correct replacement bearings for your 2004 Viking Epic Series M-1906 we need to know your axle capacity. The axle capacity can be found on a sticker located in the center of the axle tube. I have attached a list of options for…

view full answer...

Answer 7

I reached out to Dexter and they confirmed that you have a 2,200 lb axle. This means the correct bearing kit you need is part #BK1-150.

view full answer...

Answer 8

To pick out bearings/seal for a trailer hub you will need to remove one of the hubs so that you can remove the bearings and get the numbers off of them. Or, you can measure the spindle where the bearings/seal ride so that we can pick you out the…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Bearing Kit Recommendation that Include L44643 Bearings

Product Page this Question was Asked From

Continue Researching