Will Changing Travel Trailer Axle Increase the Trailers Overall Weight Capacity
Question:
I have a brand new 2015 travel trailer with low GVWR due to the axles used. They are 2800 pound Dexter Axles, part number 4330537. I cant seem to find any information on this part number, but would like to upgrade to a pair of 3500 pound axles if possible?
asked by: Eric
Expert Reply:
We do offer axle beams alone and also complete axle kits that include hub/drums, brakes etc. All can be viewed by clicking on the included link. I also was unable to find a cross-reference for your axle number 4330537. This may be a production code rather than a part number.
You can certainly change out your axle to a higher-rated part, such as the 3500-lb-rated Dexter part # T3584F-EZ-8974, but this will NOT necessarily increase your trailer's capacity. The trailer's frame design and its other features also bear on its ultimate weight capacity. You also want to be sure your hub face to hub face, and your spring center to spring center measurements for a new axle match your current dimensions.
I do recommend you check with your trailer manufacturer by giving them your VIN number to see if the trailer's frame and overall structure will let you get useful additional capacity by changing out the axle. Swapping in a new higher-rated axle will be okay if the axle is the weakest link in the overall trailer design, but this is up to the manufacturer to decide.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Shop: Roof Rack
- Video: GasStop GasGear 90-Degree Propane Hose Review
- Q&A: Replacement RV Door Latch for Fifth Wheel Trailer with Cutout Dimension of 2-3/4 inch Wide by 4 inch
- Shop: Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black
- Video: Curt Push-To-Test Trailer Breakaway Kit Review C52044
- Video: Optronics Streamline LED Trailer Light Installation
- Video: Review of Lippert Fifth Wheel King Pin - Rota-Flex 5th Wheel Pin Box for Lippert 1621 - LC328329
- Shop: Suspension Enhancement
- Search Results: reflectors
- Search Results: center brake light
- Search Results: reflective tape
- Search Results: identification light
- Search Results: trailer breakaway kit
- Shop: Square RV LP Gas Regulator Bracket - Qty 1
- Shop: Z RV LP Gas Regulator Bracket - Qty 1
- Shop: GasGear 90-Degree Propane Hose - Type 1 x 1/4" Male Inverted Flare - 18" Long - Stainless
- Q&A: Can 3,500 lb Axle of Trailer Be Upgraded to 5,200 lb Axle
- Search Results: axle
- Search Results: 8k axle
- Shop: LED Identification Light Bar for Trailers over 80" Wide - Submersible - 3 Diodes - Clear Lens
- Shop: Curt Soft Trac II Trailer Breakaway Kit with Battery Charger
- Q&A: Can Trailer Weight Capacity Be Increased by Changing One Trailer Axle
- Q&A: How to Determine the Pin Weight of a 5th Wheel Trailer
- Q&A: Can Different Load Range Trailer Tires Be Mixed on Tandem Trailer
- Q&A: Can You Mix Different Load Range Tires On The Same Boat Trailer Axle
- Q&A: Maximum Load Capacity for 205/75-15 Tire and Wheel Combo
- Shop: Towing Mirrors
- Video: Longview Driver and Passenger Side Custom Towing Mirrors Installation - 2020 Chevrolet Silverado 150
- Article: How to Raise Your Travel Trailer Height
on Trailer Suspension Parts
Dan
3/20/2024
I bent a spindle on my 4400# dexter axle and a shop recommended that since I am replacing the axle I should just replace it with a 5200# axle. It has the same dimensions but adds 12" instead of 10" hubs and thicker steel used in the tube itself (with the same outside dimensions, though). He said the higher weight axle would be less prone to being bent. I don't care about increasing weight carrying capacity, but I don't want to replace another spindle that gets bent from hitting a pothole or curb. Does it make sense to spend the extra money to upgrade to a heavier duty axle in respect to braking and/or durability of the spindle? Thanks!