Will the PullRite SuperGlide 2700 work with the Reese Universal Base Rails Part # RP30035

Question

Question:

Will a pull rite super glide 2700 work with the RP30035 installation kit

asked by: Greg

1

Helpful Expert Reply:

Yes, the Pullrite SuperGlide 2700, for industry standard rails, will work with the Reese universal base rails and installation kit # RP30035.

expert reply by: Chris B

1

Answer 1

There are a few different types of PullRite 5th Wheel Trailer Hitches. We don't carry these so I cannot inform of which you a have but I do know if you have the ISR Series version then you can use the Curt Custom Fifth Wheel Installation Kit for…

view full answer...

Answer 2

If the Pullrite Superglide is an ISR style fifth wheel hitch which is designed for the rails that the Curt kit part #C16411-204 provides this will work. But there are two types of rails Pullrite designs their hitches for with one of them being for…

view full answer...

Answer 3

The best air bag kit for your 2020 Ford F-250 Super Duty with a single rear wheel are the Firestone Ride-Rite Air Helper Springs because they are the strongest, most durable air bags on the market to provide you with optimal support for your…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 8

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 9

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 10

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Will the PullRite SuperGlide 2700 work with the Reese Universal Base Rails Part # RP30035

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching