Recommended Replacement Axle for Agricultural Type Used on Utility Trailer
Question:
I HAVE A UTILITY TRAILER AND I WAS WANTING TO REPLACE THE HUBS. THE INNER BEARING IS A LM67048 AND THE OUTER BEARING IS LM11949. I HAVE READ IN PREVIOUS QUESTIONS THAT THIS A AGRICULTURE HUB IF THAT IS TRUE WHAT OPTIONS DO I HAVE. I WAS HOPING TO JUST REPLACE THE HUBS ONLY, BUT IF THEY ARE ONLY RATED FOR 20 MPH I DO NOT NEED THAT. THANKS
asked by: BRAD
Expert Reply:
Thank you for providing the bearing numbers from your current hubs. This is important for finding suitable replacements, as are the axle weight capacity and wheel bolt pattern.
I recommend that you choose a new axle kit with spindles, hubs, bearings, races, etc. For example, we offer complete axle kits from Dexter, such as their # 35545I-EZ-89 which is 89-inches from hub face to hub face, rated at 3500-lbs, includes 5 on 4-1/2 idler hubs, bearings, races, seals, grease caps, wheel studs, lug nuts, and even marine-grade wheel bearing grease. Review and installation videos are linked as is our main page for axle kits. Here you can click on the filters on the page to choose the correct kit for your application.
The Dexter idler hub you referenced, is rated for 2200-lb axles and has a 5 on 4-1/2 bolt pattern. However, since it uses different bearings it will not fit on your spindles. The only hub we offer that fits your spindles is the Dexter # AH15450ECOMP and this is an agricultural hub.
Products Referenced in This Question
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Most Popular Wheel Bearings
- Q&A: Solution to Replace 8k Kodiak XL NevR Lube Hub Drums
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: What is the Length of the Trailer Idler Hub Assembly # TA88545-2
- Q&A: Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Where to Position the Trailer Axle?
- Article: Measuring a Trailer Tire