Adding Electric Brakes to a Trailer with Inner and Outer Bearing L44649 and 13 Inch Wheels
Question:
I need to know what I need to install electric brakes on my pop up camper. I have 13 in wheels and I do have the 4 hole plate on the axle...I also have a brake control installed on my truck thank you...I spoke with Michael Howell and he needed the ##s from the bearings...Both bearings have the numbers on them L44649 FLT-8 L9
asked by: Robert B
Expert Reply:
To start, the trailer is going to need hub and drum assemblies. Based on the bearing numbers there are several options available. If your 13 inch wheels have 4 bolt holes then you would need 2 of assembly # 8-173-16UC3.
If the wheels have 5 bolt holes then you would need 2 of assembly # 8-257-5UC3.
For electric brakes for either of these assemblies you would need # 23-48 for the right side and # 23-47 for the left side. You will also need 8 of nut # 6-17 and 8 of lock washer # 5-8.
And you will need a 7-Way trailer connector if the trailer does not already have one. For a short, 3-foot long option we have # H20042. Or for an 8 foot option we have # H20046. On these connectors white is ground, red is left turn/brake lights, brown is right turn/brake lights, green is running lights, blue is for the electric brakes, black is 12 volt power (if needed), and yellow is for reverse lights or auxiliary power (if needed).
On the brakes there are 2 wires for each magnet. Either one can be used as ground and the other for power. Ground the magnets to a clean and corrosion free bare metal surface.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 7" - Left Hand - - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly - 7" - Right Hand - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Lock Washer for Brake Mounting Bolt for 7" and 10" Brake Assemblies - 7/16" Diameter
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 7 Inch
- 10 Inch
- Washers
- ABS Fasteners
more information >
Mounting Nut for 7" and 10" Brake Assemblies - 7/16" Diameter - Zinc Plated
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 7 Inch
- 10 Inch
- Nuts
- ABS Fasteners
more information >
Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
7-Way Molded Trailer Wire Connector - 3' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 7 Round - Blade
- Hopkins
more information >
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 6 - 10 Feet Long
- Plug and Lead
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,000-lb Axles - 7" - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Recommended 5 Lug Timbren Axle-Less System for 13" Trailer Tires
- Q&A: 2,200 lb Axle Replacement System for Triton Snowmobile Trialer
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Replacement Brake Assemblies for 2,200 lb Reliable Trailer Axles
- Q&A: Replacement Hub for Starcraft Pop-Up Trailer
- Q&A: Parts Needed to Add Electric Brakes to a 1996 Starcraft Satellite 1224
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub