Replacement Brake Assemblies and Grease Seals for Cargo Trailer
Question:
Looking at replacing the brake assembly on my cargo trailer... Need seals as well...I am keeping to old drums and getting them re-surfaced.... I have national seals # 442251 and am having trouble finding that number on your site... I get all my trailer stuff from you guys so dont let me down! If I give you the make and model of my trailer and serial number and such... Can you help me with a parts list!? Thanks.
asked by: Andy
Helpful Expert Reply:
We can help you with both new brakes for your cargo trailer and new grease seals.
A link to our trailer brake page is provided. At the top of the page choose electric or hydraulic drum brakes to see all options. Then choose your axle capacity, which should be noted on a sticker or plate on the axle itself, then brake size and either manual- or self-adjust type. For example, if you need a 10 x 2-1/4-inch electric brake with a 4-bolt mounting flange you can use # AKEBRK-35L-SA (left) and # AKEBRK-35R-SA (right).
We offer both single-lip and double-lip seals to replace your National 442251 seals. For a single lip seal use part # 58846 and for a double-lip seal use # RG06-050. Note that part # 58846 is sold as a single unit while # RG06-050 is sold as a pair.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can The Mounting Studs Be Removed From The Electric Brake Assembly AKEBRK-35L-SA?
- Q&A: Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Electric Trailer Brake Assemblies For a 2018 Jayco Jay Feather 29QB Travel Trailer
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Brake Assembly for Axletek 44-GG
- Q&A: Correct Replacement Idler Hubs for Champion Boat Trailer
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug