Largest Hitch Mounted Cargo Carrier Bag Recommendation

Question

Question:

extra-large cargo bag for cargo carriers, part number 988501. Now, this cargo bag measures 59 long by 24 wide and 24 deep. Is there anything out there that is deeper than 24inch that you may know of? Planning on a 6 week road trip and have a carrier rack and deeper would be better. thanks

asked by: Peter K

0

Expert Reply:

The absolute biggest cargo bag we offer designed for hitch mounted cargo carriers is the part # HCR635. This bag has dimensions of 72" long x 32" wide x 26" tall when expanded so it would be a bit deeper than the part # 988501 that you referenced.

expert reply by: Jameson C

0

Answer 1

If you check out the end of the review video you will see the test course video I attached to the right that shows the #e98874 being used in our back lot that has speed bumps installed in it you will see that the hinge portion of the carrier is…

view full answer...

Answer 2

You'd only need one hitch lock with the etrailer cargo carrier part #e98874 that you referenced. There are two plain pins that allows it to tilt away from the vehicle so you can get to your back hatch or fold up towards your vehicle when not in…

view full answer...

Answer 3

The cargo bag I highly recommend for your Pro Series Cargo Carrier #63153 is the etrailer Cargo Bag #988501. It has 20 cubic feet of storage, is waterproof with PVC coated nylon, and has six tie-down straps that will secure it to your Pro Series…

view full answer...

Answer 4

The tilting capability of the 24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs #e98874 does not decrease the maximum weight capacity rating of the hitch. The cargo carrier does not use an extension; we just…

view full answer...

Answer 5

This sometimes happens and the best solution is to get the locking anti rattle bolt #e99047. It is a lot longer and can be locked so it's an upgrade for sure. This will work with your tilting cargo carrier #e98874 and other etrailer products as…

view full answer...

Answer 6

Yes you should indeed use the washers for the hitch pin with the 24x60 etrailer Cargo Carrier for 2" Hitches #e98874. Reason is, the washers help distribute the pressure on the anti-rattle bolt, especially when tightening them down. So what you…

view full answer...

Answer 7

When installing the 24x62 etrailer Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs #e98874 you must use either the included anti-rattle threaded hitch pin or the Threaded Anti-Rattle Hitch Pin Lock #e99047. You cannot use a non-threaded…

view full answer...

Answer 8

The Cargo Carrier for 2 Inch Hitches, Part #e98874, as a folding-type carrier, will tend to exhibit slightly more play than a fixed non-folding carrier. There will always be some amount of wobble with an empty carrier even with a product like this…

view full answer...

Answer 9

These carriers do not wobble any more than a fixed carrier would. Usually the wiggling comes from the shank of the carrier that is inserted in the hitch receiver. There are devices and locks available to prevent this from happening. You could use the…

view full answer...

Answer 10

For an anti-rattle device that would work well in a 2 inch hitch cargo carrier that also doubles as a hitch lock you would want the part #e99047.

view full answer...

Answer 11

Yes, if you select "keyed alike" from the drop down menu before hitting add to cart on the product page for the anti rattle hitch pin part #e99047 they will all come using the same key number.

view full answer...

Answer 12

The Tow Ready J-Pin Stabilization Pin and Barrel Lockset 63201 is made for hitch-mount accessories like cargo carriers that do not have a threaded hitch pin hole. Since the 24x62 etrailer Cargo Carrier #e98874 does have a threaded hitch pin hole, you…

view full answer...

Largest Hitch Mounted Cargo Carrier Bag Recommendation

Product Page this Question was Asked From

Continue Researching