Does the Swagman XP # S64940 Include an Anti-Rattle Bolt

Question

Question:

Does this model come with the Anti-Rattle pin? I believe it is shown in 1 of the pictures, but the specs just say pin and clip included. Thanks.

asked by: Durand

0

Expert Reply:

Yes, the Swagman XP # S64940 that you referenced does come with an anti-rattle hitch pin. If you check out the review video I attached you will see it getting used.

expert reply by: Jameson C

0

Answer 1

Yes, this rack, part S64940, works well on a 2 x 2-inch hitch and has been designed specifically for use on the back of a large travel trailer. It has a sturdy steel construction and cushioned cradles for extra sway protection. To see install…

view full answer...

Answer 2

For all of the specifications that you are looking for, I believe that a single arm rack with rotating cradles would be the best option, like the Swagman XP, #S64940. This rack is ultra-sturdy, has a good finish that can be kept up with a bit of…

view full answer...

Answer 3

In order to install the Draw-Tite Max-Frame Trailer Hitch Receiver part #76025 on a 2014 Honda Odyssey you"ll need to trim the fascia in the center to allow the receiver tube opening to pass through and above the tail pipe. The reason you must…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Does the Swagman XP # S64940 Include an Anti-Rattle Bolt

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching