Bulldog Collar Lock Coupler and Tongue Jack for Scamp 13FT Travel Trailer

Question

Question:

Currently, I have an A Frame, 5,000 pound coupler on my Scamp 13foot travel trailer tongue weight 100 lbs, trailer 1500 lbs. I would like to replace this with the Bulldog collar lock for A frame trailers, 5,000 lb version. I like the idea of the visual inspection capability to see that the ball is where it should be before towing. Is this coupler significantly longer than the the version I currently have? Ive read that my trailer tongue is 50 degrees, but not sure what theyre measuring there. I just need some reassurance that this unit will fit and weld on nicely to my Scamps trailer tongue before I buy. Also...do you have any recommendations for a new tongue jack? I also have a standard tongue jack on my trailer if I remember correctly, its top wind. Why all the changes? The previous owner of my trailer had a little mishap and the trailer popped off the ball while towing. The tongue and jack dragged on the pavement for a while, and I would just feel better changing the whole thing out. Thanks for any help or recommendations you might be able to make. I appreciate it! Sincerely,

asked by: Wendy L

0

Expert Reply:

I went out to our warehouse and pulled the Bulldog Collar-Lok Coupler w/ High-Profile Latch, # BD028384 to get a measurement for you. The neck of the Bulldog coupler measures 8". I have included pictures which illustrate these measurements.

The Bulldog Collar-Lok Coupler, # BD028384, is a heavy-duty coupler that offers a tight fit with visual indication of proper closure around the ball to ensure quick, easy and secure hookup which will hopefully keep you mishap-free. This weld-on, A-frame design, coupler mounts to a 50-degree trailer tongue so this would be a great option for you.

As for a new tongue jack, I recommend taking a look at the Bulldog Top Wind A-Frame Jack, # BD1750290301. This is a great economical jack that offers a capacity of 5000 lbs, top wind handle, ergonomic design for smooth, easy cranking, and provides exceptional stability and reliability.

In addition to the jack you may also be interested in a Detachable Footplate, # BD018564, or the 6" Wheel Caster, # BD500245.

I have included a few short videos for you.

expert reply by: Leah S

0

click to enlarge

Answer 1

I did some checking and the a-frame coupler with the most distance at the widest point is the Bulldog Collar-Lok coupler part #BD028384. This coupler has a 11 inches at the widest point. Is there a reason you need one that wide? All that really…

view full answer...

Answer 2

It sounds like you are looking for a Bulldog High-Profile Latch Repair Kit #BD024200 as long as your coupler is a Bulldog heavy-duty Collar-Lok coupler. If this is not what you are looking for email me back.

view full answer...

Answer 3

I don't think you are doing anything wrong necessarily. There are 2 possible issues that I can think of causing the problem. First, the spring may not be the correct size. A spring that is too short and/or not the correct diameter would fall…

view full answer...

Answer 4

When you mention locking collar, I am led to believe that you might be describing a hammer blow-type coupler, like our part #BD028288. This type of coupler has a collar that would slide up, securing the jaws of the coupler in place over the trailer…

view full answer...

Answer 5

Two-wire LED clearance lights such as the Red #MCL32RB or the Amber #MCL44AB have one wire for the power lead and one ground wire. The wire that was attached to your old clearance lights will be spliced to the power wire of your new lights. The…

view full answer...

Answer 6

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Bulldog Collar Lock Coupler and Tongue Jack for Scamp 13FT Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching