Wiring Adapter to Install Voyager Brake Controller in 2009 Dodge Ram

Question:

Harness to connect a 2009 Dodge Ram with a Tekonsha Voyager Brake Controller- Can you tell me what harness I need to buy to do this? Thanks.

asked by: Todd

Expert Reply:

If your Ram is equipped with the brake controller quick-install connector under the dash, you'd use the # 3020-P to install your Voyager if the controller has the plug on the end of the wires or if the wires exiting the Voyager don't have a plug on the end of them, you'd simply cut the black plug off and wire the harness to the controller color for color.

Dodge equipped the Ram, Dakota and Durango models with the connector under the dash only if the vehicle was equipped with the factory 7-way trailer connector. If the vehicle has the factory 7-way, the brake controller connector will be located under the dash behind the emergency brake pedal. There will be a white rectangular junction box on the firewall, and the blue connector will be right on top of the white box, as shown in the provided photo.

If you don't have the 7-way, the connector probably won't be there and you'll need to hardwire the brake controller using our # ETBC7 brake controller install kit. The kit contains everything necessary to install a controller on your vehicle, but you'll need a functioning 4-pole trailer connector. If you'd reply telling me which Dodge vehicle you have, I'd be happy to provide additional specifics.

I'll link you to the instructions for the ETBC7 kit.

expert reply by: Mike L