Replacement Hub for a Harbor Freight Trailer
Question:
Is this hub a direct replacement for the Harbor Freight Hub, bearing, etc.
asked by: Gary
Expert Reply:
It is not likely that any of the hubs we carry will fit the Harbor Freight trailer. Those trailers use non-standard hubs and bearings that you would have to get by going through the manufacturer. But you can pull a hub off and check the bearings for their numbers stamped into the sides of them. With the bearing numbers I might be able to determine if we have a replacement that is a direct fit.
Hub # AKIHUB-440-2-1K uses bearing L44643 for the inner and outer bearing. This bearing has an inner diameter of 1.000 inches. Bearing measurements are taken using dial or digital calipers to the 1000th of an inch.
If you cannot find the numbers on the bearings you will need to measure them using dial or digital calipers for accuracy. I have included a picture that shows where bearing numbers are and where you would measure them.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Upgrading Trailer Tires and Wheels For Highway use on Harbor Freight 4x8 Folding Trailer
- Q&A: Recommended Replacement Hubs for Harbor Freight Trailer
- Q&A: Best Parts to Upgrade a Harbor Freight Trailer
- Q&A: Replacement Components To Upgrade Harbor Freight Folding Trailer
- Q&A: Availability of Replacement Hubs for a Harbor Freight Trailer
- Q&A: Best 4.80-12 Trailer Tires For Highway Speed
- Search Results: folding trailer
- Search Results: 30205 bearing kit
- Q&A: Spare Parts for Harbor Freight HaulMaster Utility Trailer 90154
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Shop: CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks - 12" Wheels - 14' Boat - 800 lbs
- Shop: Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: Taskmaster 4.80R12 Radial Trailer Tire - Load Range C
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: 68149
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Shop: Fifth Wheel Hitch
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: dust cap
- Video: Titan Trailer Brakes T2385200 Review
- Shop: Brake Controller