Installing E-Track on an Enclosed Trailer For Securing a Grizzly 660
Question:
I bought a brand new enclosed 14 ft x 7ft trailer. I need to install these tracks bought 4 on both sides going through the whole trailer. What is the best way to install these? Should I think when Im installing that the wheels of my Grizzly 660 should be laying on the track or on the outside or inside of it? Also what is the best way to secure it. I also bought 4 of the IMF18800-87 to use with it including some E-Track D-Rings. Any help would be great. This is my first time hauling.
asked by: Keith
Expert Reply:
You would want the E-tracks like part # E19148 to be directly underneath the wheels of your ATV so that it would be easier to secure it with straps directly over the center of the tire.
To secure the track I would recommend using the backing plate part # e96RR. I attached an install video that details how to use the backing plates to install E-tracks on the floor of a trailer.
For D-rings to use for tie-downs you would want the part # E59143. Then for tie-downs the ratchet straps part # EM31352 would work great.
Products Referenced in This Question
Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs
- E-Track
- E-Track Anchor
- 1200 lbs
- Erickson
more information >
etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 2
- Accessories and Parts
- E-Track
- Tie Down Anchors
- E-Track Parts
- 6 Inch Wide
- Backing Plate
- 6 Feet Long
- etrailer
more information >
Erickson Ratchet Tie-Down Straps w/ Web Clamps and S-Hooks - 1" x 10' - 500 lbs - Qty 4
- Ratchet Straps
- Trailer
- Truck Bed
- S-Hooks
- 4 Straps
- Manual
- 6 - 10 Feet Long
- 0 - 1 Inch Wide
- 351 - 500 lbs
- Erickson
more information >
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Install E-Track in 3 Easy Steps
- Article: Trailer Wiring Diagrams
- Q&A: Is E-track Stronger Than X-track, Is There An Advantage Of One Over The Other
- Q&A: Replacement Lid Options For A Dometic FV5300 RV Roof Vent
- Q&A: Differences Between Different Brands of E-Track
- Q&A: Can E Track be Used to Secure Car in Car Hauler Trailer
- Q&A: Where to Attach E-Track to Aluminum Bed Trailer for Max Holding Strength
- Q&A: Corrosion Concerns When Installing E-Track On Aluminum Trailer
- Q&A: Recommended Replacement Wiring for 1996 Dutchman Duck with Obsolete Wiring Harness
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Choose the Right Trailer Hitch Class
- Article: Determining Trailer Tongue Weight
- Article: How (and Where) to Connect an RV Propane Grill