Replacing Brake Assemblies on 5th Wheel Trailer
Question:
on a 5th wheel can I put new backing plate assemblies on one axle. The other axle is in good shape?
asked by: Bill L
Expert Reply:
Are you speaking of brake assemblies? If so, you can certainly replace the brake assemblies on one axle and leave the existing ones in place on the other axle as long as they're working okay.
When you replace a brake assembly, be sure to examine the armature surface of the brake drum (the inside surface that the magnet rides against.) If the inside of the brake drum has grooves worn in it, you'll want to replace the drum as well, otherwise the grooves will be worn into the face of the magnet, shortening its life.
If you can tell me the inside diameter and depth of your brake drums, and the number of holes in your brake mounting flange, I would be happy to recommend replacement brake assemblies for you. If you were needing new brake drums, I could recommend replacements if you would provide the number of lugs and the dimension of the bolt circle and the reference numbers from the inner and outer bearings.
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Q&A: What to Use to Clean of Trailer Brake Assembly Brake Magnets
- Search Results: dexter magnet
- Search Results: hitch receiver clamp
- Video: Redline Trailer Brakes BP01-180 Review
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: Replacement Trailer Brake Magnet for 12" Brake Assemblies
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Q&A: Troubleshooting Trailer Brakes that Lock Up When Connector is Connected
- Q&A: What is the Maximum Amperage Draw of Trailer Brake Magnets on a Tandem Trailer with Four Brake Drums
- Q&A: Brakes, Wires, and Grounds Look Good but Trailer Brakes are Weak on 2006 Cedar Creek Trailer
- Q&A: Troubleshooting Diagnostic Amperage on Prodigy P3 Brake Controller for Brake Magnet Function
- Q&A: Replacement Magnets for Dexter 12-1/4 x 4 Electric Trailer Brake Assemblies
- Q&A: Can I Replace Just a Brake Magnet or do I Need to Replace the Assembly
- Article: Most Popular Wheel Bearings
- Search Results: 25580
- Search Results: safety chains
- Search Results: 10~36
- Article: Trailer Tire Sizing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: l44649
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Search Results: equalizer
- Video: Timbren Axle-Less Trailer Suspension System Installation