Will Westin Replacement Endcap for Westin Nerf Bars Fit Mopar Steps on 2001 Dodge Ram 1500

Question

Question:

I bought the truck recently and Im missing end caps for the ends of the step. I have a Mopar side step that measures 3 inches. Will these fit you think. Thanks

asked by: Curt W

0

Expert Reply:

The part you referenced, Westin Replacement Endcap for Westin Nerf Bars # 80-0134, is intended specifically for the 3-inch diameter round tube steps in their Platinum Series, E-Series and Signature Series products. This is the only size of round replacement Westin end cap we offer.

I pulled a sample of this item from our warehouse so I could give you exact measurements that might help you determine compatibility with your Mopar steps. Please refer to the linked photo.

This end cap has a taper to its shape. The diameter of the outside flat surface is 2-7/8-inches. The diameter of the narrower tapered end (that goes inside the tube step) is 2-3/4-inches. The depth of the cap is 1-inch.

This plastic material is fairly stiff but the tapered end has a little give to it.

expert reply by: Adam R

0

click to enlarge

Answer 1

The Westin #80-0134 is designed to fit Westin's Signature Series, Platinum Series and E-Series step bars which have a 3 inch diameter. If your bars are 3 inches in diameter, there's an excellent chance that the end cap would fit.

view full answer...

Answer 2

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is…

view full answer...

Answer 3

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area…

view full answer...

Answer 4

You will need to mount the Storage trunk #MPG481 at the front of the Malone MicroSport Trailer with J-Style Carriers for 4 Kayaks - 800 lbs #MPG462G2 where the mounting brackets can be attached to the frame, as shown in the installation video for the…

view full answer...

Answer 5

We have one box that fits the Malone Microsport trailers with the part #MPG481 which installs below the bars of the rack. I attached a review video and picture for you to check out as well.

view full answer...

Answer 6

To replace the 185/80R13 tires on your 2018 Geo Pro 12RK Travel Trailer I recommend the Kenda Karrier ST185/80R13 Radial Trailer Tire - Load Range D #AM10208 which have the same 1710lb load rating at 65 PSI. Kenda is a very reputable brand, and makes…

view full answer...

Answer 7

Brake flanges on 3,500 lb axles are going to be the exact same between a Dexter axle and Lippert but sometimes the Al Ko options are different. I believe you are asking about the price difference between the Dexter 3,500 lb axles part #T3584F-8974…

view full answer...

Answer 8

Your 2020 Chevy Traverse is prewired for a brake controller. Instead of a connector, there are 4 blunt cut tow package wires located under the dash below and behind where the headlight switch is located. These wires will directly connect with the…

view full answer...

Answer 9

It's not common for the spindle number to be printed anywhere on the axle. That said, if you're looking for new bearings/races and seals all you need to do is note the capacity or measure. The easiest method would be to crawl under the…

view full answer...

Will Westin Replacement Endcap for Westin Nerf Bars Fit Mopar Steps on 2001 Dodge Ram 1500

Product Page this Question was Asked From

Continue Researching