Custom Towing Mirrors for a 2014 Chevy Silverado 1500 with Chrome Top Mirrors

Question

Question:

Do you have any that fit the 2014 1500 standard mirror with the chrome cover on the back

asked by: Warren

0

Expert Reply:

If your mirrors look like the mirrors in the video I have linked only instead of the paint match on top it is chrome AND they are exactly the same shape then the CIPA mirrors, # CM10950, should fit. We have heard that they can be a very tight fit and some modification of the slip-on mirrors might be needed.

Customers have said they have used Longview mirrors, # LVT-1800, on models that have the chrome top mirrors so they are another option.

expert reply by: Michael H

0

Answer 1

The towing mirrors I recommend for your 2018 GMC Sierra 1500 are the CIPA Custom Towing Mirrors #CM10950 because of their large mirror face, easy adjustability and simple installation. The CIPA Custom Towing Mirrors #CM10950 have a mirror face…

view full answer...

Answer 2

The CIPA Custom Towing Mirrors part #CM10950 which are a fit for a 2018 GMC Sierra 1500 will work with the power folding mirror features as per the review attached below.

view full answer...

Answer 3

Yes, CIPA custom towing mirrors #CM10950 will fit your 2015 Chevy Silverado 1500 with power, heated factory side mirrors with the chrome cap on the factory mirror housing. I have linked a video showing an example installation of these mirrors for…

view full answer...

Answer 4

If the side mirrors on your 2015 Chevy Silverado have the plastic chrome-appearance caps then the CIPA towing mirrors, #CM10950, will not fit. But if the top halves of the mirrors are actual chrome and retain the same dimensions as the regular all…

view full answer...

Answer 5

For a trailer that has an angle iron frame like what you have what I would recommend is a system like the Reese Steadi-Flex part #RP66558 you referenced and have the outer brackets welded to the frame of the trailer since there isn't a clamp on…

view full answer...

Answer 6

Any trailer brake controller that offers a custom plug-in wiring harness, like the Prodigy P3 #90195 that installs in your 2015 Silverado 3500 using custom plug-in harness #3016, can also be hardwired. Brake controllers use a standard 4-wire hookup,…

view full answer...

Answer 7

A factory 7-way trailer connector isn't all you need to power a trailer's electric brakes. You still need a brake controller. Some Ford F-150s are equipped with a factory integrated brake controller, which you may have. If your 2012 Ford…

view full answer...

Answer 8

This is a fairly straightforward install. GM has already run some of the necessary wiring from the rear frame rail area to the engine compartment, so you will see a blue wire for the electric brake function, and an orange wire which provides 12 volt…

view full answer...

Answer 9

For a sway bar that will work nicely on the camper you are looking to purchase I recommend the Reese Friction Sway Control Kit #83660. Since your camper will be longer than 26 feet it is recommended to use two friction sway control bars so you will…

view full answer...

Answer 10

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…

view full answer...

Answer 11

When you are installing the brake controller like the P3 #90195, you will need to install the circuit breaker between the 7-way connector and the battery post. You also use a circuit breaker between the brake controller and the positive battery post.…

view full answer...

Custom Towing Mirrors for a 2014 Chevy Silverado 1500 with Chrome Top Mirrors

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching