Gooseneck Hitch Recommendation for a 2015 Ram 2500 with Hitch Prep

Question

Question:

I have a 2015 250p ram with prep package what do I need to get to pull a goose neck thanks

asked by: Anthony

0

Expert Reply:

For a gooseneck ball kit for the underbed hitch prep package of your 2015 Ram 2500 all you need is the Curt Ball and Safety Chain Loop Kit for Ram Underbed Gooseneck Hitch # C58CR.

expert reply by: Jameson C

0

Answer 1

That's a good question, and there are just a couple differences between the Curt Ball and Safety Chain Loop Kits #C58CR and #C60618, which are the capacities of the kit, and the height of the hitch ball. - 38,000 lb Capacity, 1-5/8" Rise in…

view full answer...

Answer 2

The highest capacity gooseneck hitch kit we offer for your 2022 Ram 3500 long bed with factory pucks. The Curt Ball and Safety Chain Loop Kit for Ram Underbed Gooseneck Hitch #C58CR is has a maximum towing capacity of 38,000, and uses a 2-5/16"…

view full answer...

Answer 3

For your 2015 Ram 3500 with the factory rail kit the pop-in ball part #C58CR is a confirmed fit to provide you with a gooseneck hitch ball. This comes with everything needed to install the hitch ball in the bed of your truck.

view full answer...

Answer 4

Fifth wheel hitches like the #C32DR do not require safety chains so there aren't any brackets on the Curt Crosswing part #C32DR for them. It's an interesting caveat but if there isn't a hitch ball involved safety chains aren't…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Gooseneck Hitch Recommendation for a 2015 Ram 2500 with Hitch Prep

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching