Trailer Stake Pocket Bracket Recommendation for a Dump Trailer

Question

Question:

I am looking for the metal brackets to mount to the side of my dump style trailer to install wood sides to extend the height of my load.

asked by: Jeff S

1

Helpful Expert Reply:

We have exactly what you need, check out the CE Smith Stake Pocket for Flatbed Truck or Trailer # CE45004G. These are the metal brackets that once you attach to a trailer will allow you to build a sidewall for you trailer. The pocket accepts a 2x4.

I attached an install video for you to check out as well.

expert reply by: Jameson C

1

Answer 1

Since most stake pocket applications involve letting the board fall as far as it can into the pocket and a horizontal board attached to the 2x4 providing how it stops none of the stake pockets we offer like the #CE45004G have bottoms.

view full answer...

Answer 2

I went out to the warehouse and pulled a CE Smith Stake Pocket, #CE45004G, to take some measurements. The dimensions listed on the product page are correct. The opening is 3-1/2 inches wide by 1-1/2 inches deep. A lumber industry standard 2x4…

view full answer...

Answer 3

I do have an option for you but the Rack'em Heavy Duty Stake Pocket for Flatbed Truck or Trailer part #PK-BSP does require the stake to be tapered at the bottom. I recommend CE Smith Stake Pocket for Flatbed Truck or Trailer - Galvanized Steel…

view full answer...

Answer 4

For the Rack'em Heavy Duty Stake Pocket #PK-BSP you will need to use a stake pocket anchor that is specifically designed to work with the 3" tapered pocket. The Stake Pocket Tie-Down Anchors #PK-SPTD will work with that size pocket. These…

view full answer...

Answer 5

We carry a number of stake pockets and you can choose the correct one for your application in terms of size and weld or bolt on. The bolt-on option is the CE Smith Stake Pocket #CE45004G which is 3-1/2" long x 1-1/2" wide x 2-1/2"…

view full answer...

Answer 6

There are two Curt 5th wheel service kits. The Curt #16125-SK3 kit is designed specifically for the Curt #C16125 hitch. The Curt #C45UR kit is for most other Q-series hitches. Unfortunately, Curt does not sell the grommets individually.

view full answer...

Answer 7

There many possible ways to mount a stabilizer jack such as the #TJ01RT-HD you looked at. Mounting them in the orientation shown the diagram would tend to work a bit better to stabilize the trailer against side to side movement, while having the…

view full answer...

Answer 8

The 12 volt circuit on a 7-Way trailer connector can provide a maintenance charge to a 12 volt battery but it will not be able to fully charge it because the wiring for a 7-Way is too small to carry the current required. What you can do to charge the…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Trailer Stake Pocket Bracket Recommendation for a Dump Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching