Does the # RM-910003-40 Bushing Kit for Roadmaster Sterling Tow Bar Include Parts for Both Arms

Question

Question:

Is this kit for both arms? It looks like it... Thanks

asked by: Jack

1

Helpful Expert Reply:

The Roadmaster # RM-910003-40 Inner Arm Bushing Kit for Sterling Tow Bars you referenced does include replacement bushings for both arms.

expert reply by: Mike L

1

Answer 1

You've been doing some great research! I reached out to my contact at Roadmaster who said that the 2 kits you need to service your older Roadmaster Sterling tow bar are parts #RM-910003-40 and #RM-910003-30 like you referenced. These come with…

view full answer...

Answer 2

Replacement inner arm for Sterling tow bars #RM910660 includes the inner arm and a nylock nut. According to the instructions the end is threaded. the bushings/seals are sold separately, #RM-910003-40.

view full answer...

Answer 3

If you can provide me with exactly what tow bar you have I may have better information for you but I had saw you were looking at parts for the older Roadmaster Sterling Tow Bar so I will assume that is what you have. In order to free the arms…

view full answer...

Answer 4

It sounds like you are referring to the inner arm bushings that come with the kit part #RM-910003-40. This kit is a fit for your Sterling and comes with the seals you referenced.

view full answer...

Answer 5

If all you need is the bushing kit for your Sterling tow bar then part #RM-910003-40 is the kit you need. We also offer a Complete Repair Kit for Roadmaster Sterling Tow Bar, part #RM-910003-30. This kit comes with rubber caps, locking springs,…

view full answer...

Answer 6

The correct Roadmaster Sterling repair kit for yours that has the serial number 019336 is the #RM-91003-30.

view full answer...

Answer 7

The Roadmaster Sterling All Terrain Tow Bar part #RM-576 is just simply the newer, updated model of the discontinued Roadmaster Sterling Tow Bar part RM-555. It sounds like you might be looking for replacement parts for one or the other so if that is…

view full answer...

Answer 8

The tools needed to replace the inner arm of your Roadmaster Falcon Tow Bar part #RM-520 would be a 9/16 socket wrench, 1/4 inch allen wrench and a slot screwdriver. I attached picture of the installation instructions for this kit for you to check…

view full answer...

Answer 9

Form your picture it is dificult to tell which parts on your Roadmaster #RM-576 Sterling tow bar are damaged. We carry the following repair parts. Roadmaster #RM910660 Inner Arm Assy. Roadmaster #RM-910003-35 Handles Roadmaster #910019-40 Tow Bar…

view full answer...

Answer 10

I attached a set of pictures that detail how to remove and reinstall the inner arms of your Roadmaster Sterling #RM-576. When I spoke to my contact at Roadmaster about a similar cleaning question he recommended that once you get the arm out you will…

view full answer...

Answer 11

Yes, the Inner Arm Bushing Kit for Roadmaster Sterling Tow Bars #RM-910003-40 will work with your Sterling tow bar. The Inner Arm Bushing Kit for Roadmaster Sterling Tow Bars #RM-910003-40 works on models with a serial number lower than 27671 which…

view full answer...

Answer 12

If you just need to replace the inner arm on your RoadMaster Sterling All Terrain Tow Bar, part #RM-576, you will first need to check the serial number on the tow bar. If the number is lower than 27824 then you have the older style Sterling tow bar…

view full answer...

Does the # RM-910003-40 Bushing Kit for Roadmaster Sterling Tow Bar Include Parts for Both Arms

Product Page this Question was Asked From

Continue Researching