BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2
(820 reviews)
Price: $71.95
In Stock
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2
Item # Y06129
Retail:$110.08
Our Price: $71.95
You Save: 35%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (820)
- Q & A (0)
- Photos
Yakima Roof Rack - Y06129
- Fit Kits
- 2 Pack
- Yakima
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
- Custom-fit mounting clips and pads allow you to mount BaseLine towers (sold separately) on your vehicle with a naked roof
- Padded, stainless steel clips provide secure grip on your door jambs
- Snap onto DropHooks inside towers
- Protect door jambs from scratches and abrasions
- Powder coated for durability and rust resistance
- Molded rubber pads fit the contours of your roof
- Clip onto bottoms of towers
- Protect roof from scratches and abrasions
Specs:
- Quantity: 2 clips and pads
- Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers (sold separately) to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006129 Custom Base Clips and Pads for Yakima Base Line Towers
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Manufacturer issue
Customer Reviews
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06129
Average Customer Rating: 4.8 out of 5 stars (820 Customer Reviews)
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.by: Jack 08/17/2022
by: James 06/08/2021
by: William 09/03/2021
by: Mark09/12/2021
by: Howard11/09/2023
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of eTrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
by: Eric04/26/2024
I purchased clips that were stated as being compatible with our 2010 Chevrolet Impala. The front clips fit well, however the rear clips do not.
by: Eric04/26/2024
I purchased clips that were stated as being compatible with our 2010 Chevrolet Impala. The front clips fit well, however the rear clips do not.
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
by: Anthony11/29/2020
I have a 10th gen Civic sedan and I was dying to get the perfect roof rack set for my car. At the time of my purchase there was not many visuals of what the rack system looked like on this car.
I purchased the:
•Yakima 50in Jetstream crossbars
•Yakima baseline towers
•bc182 & bc183 clips
•Yakima 46in fairing
Overall I love how it looks on my car! During This COVID pandemic I have been camping more, and this is the perfect foundation! First off, the 46in fairing is the perfect fit for the 10th gen civic! Wind noise is low also with the help of the aerodynamic crossbars. My main concern was the fuel efficiency. On long road trips I still average 38-40 mpg with the rack on. My daily commutes I average 34 mpg without Econ on.
by: TimN03/19/2024
Works perfectly on my 2023 Chevy Silverado. The rubber pads are soft enough to prevent scratches, yet firm enough to support the force of being cranked down on the roof. They fit perfectly in the ridge near the edges of the rough.
by: JD03/07/2018
Hyundai Sonata - glass pano roof. These items have been on for about 1-year. So happy with the set up. I’ve take a road bike and a mountain bike on 500+ mile trips. The mounts do an excellent job.
by: Kevin04/06/2022
Overall these are a great product and much needed. I had a Tiguan with the side rails but needed cross rails for my gear. When I got my Jetta I wanted to keep my Yakima cross rails so I needed the Towers. They work great and fit my car well. I took them off recently after having them on for a year for re-fitment.
by: Dave G.06/20/2019
I ordered the Yakima "aero" bars , baseline towers, and BaseClip kits for my 2019 Honda Civic 5 door. While expensive the quality is excellent and it was a pleasure to assemble such a high quality and precision engineered product. It fits perfectly on my new car and the "aero" bars are quiet even at freeway speeds. Highly recommended.
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight.
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. They provided a nice, flush finish and hold the racks down tight.
by: Robert07/13/2021
The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again.
by: Mark05/26/2023
Works just like the old towers except they pivot to give a snugger fit on the truck, which makes this tower fit easier and less likely to come loose or break like the other towers. Also it is nice to have a rack on the front of the cab for long items, like full size canoe, that would be too long and need the extra length to fit. Without the extra tower the canoe has to shift back and hang off the back too much and securing the front of the canoe is more challanging.
by: Ricardo,03/03/2021
These are great, and it is so nice to get a custom base clips that match the angles and contour of the sides of your roof. Makes it look very clean. These are made very well and for sure these will last a long time like my other Yakima products.
by: Richard04/06/2023
Arrived as part of a set of components for a roof rack and kayak carrier. I liked that etrailer had a guide to get the right components to fit my car's make and model year. This baseclip set arrived quickly, but the set for the rear of the car that arrived with them were obviously returns that had not been inspected. That set was missing parts, requiring follow-up calls to arrange for a new replacement for the incomplete set, and about a week's delay in getting the rack up on the car.
by: Daniel 07/22/2023
The clips are fine . I will review etrailer. I needed just clips I asked them which ones they told me. Great place.
by: Bryan 01/31/2024
Clips are perfect and the etrailer.com experience was great. Ordered on a weekend and had the clips as promised by the following Wednesday.
by: Sandra04/22/2022
Love my roof rakes just put them back on for this seasons kayaking very easy application was able to apply them myself
by: James 11/08/2023
Base clips arrived quickly and worked just as expected. Make sure you know the model that you need before ordering.
by: Debra09/10/2023
The rack has been so useful since I purchased it. Staff at etrailer.com were exceptionally helpful in getting the best option for my car and answering questions. I recommend this company, for its 110% customer service, excellent prices and timely delivery.
25
503
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Recommended Roof Rack for a 2024 Toyota Corolla Hatchback w/ No Rails or Crossbars To add a roof rack to your 2024 Toyota Corolla Hatchback that does not stick over the sides, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y69UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06129 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06131 This aero bar roof rack system has a 165 lbs capacity. I recommend adding...
view full answer... - Yakima Round Bar Roof Rack that Fits 2010 Toyota HighlanderThat's an older Yakima roof rack than we have replacement towers for. It looks like your buddy ruined the lock assemblies and there wouldn't be a way to replace the lock setup. What vehicle do you have? I can look into what the correct Yakima round bar rack is and see if there's a way to reuse at least the bars.
view full answer... - Which Yakima BaseClips Fit 2018 Toyota TundraThe correct rear baseclip set for a 2018 Toyota Tundra is the part # Y06129. The front clip is part # Y06121.
view full answer... - 2012 Toyota Venza Panoramic Roof Carrying Weight CapacityI wouldn't recommend resting any weight whatsoever directly upon the glass panels that make up the panoramic roof of your Venza. The glass that makes up that sunroof is very expensive to replace. If you're wanting to carry cargo on the roof, your best bet would be to use a Yakima Q-Tower roof rack and a small cargo basket like the Thule # TH859XT. According to Yakima, when installed on the Venza, the roof rack will have a 125 lb capacity and would consist of the following parts: 58 inch...
view full answer... - Recommended Roof Rack For 2012 Toyota Highlander With No Side RailsI called my contact at Yakima about your 2012 Highlander. They told me the 4 points you said that are on your roof are actually there if you would decide to have the raised side rails installed and are not used as mounting points for a roof rack. The Yakima roof rack we have that is a confirmed fit for your Highlander has three components. To order this roof rack you would need part # Y00426, # Y28TR, and # Y06129.
view full answer... - How Can Thule Hullavator Kayak Carrier Get Installed on 2019 Ford EcoSport with Flush RailsIf you'd be willing to remove the flush rails on the roof of your 2019 Ford EcoSport so that you could install a naked roof Yakima rack that fits your vehicle like the JetStream kit part # Y00425, # Y28TR, # Y06129, and # Y06169 you'd have a great way to install the Thule Hullavator part # TH898! There isn't an aftermarket roof rack configuration out there though that will fit with the flush rails you have now.
view full answer...
- Will Hullavator Pro Kayak Carrier Fit Thule WingBar Evo Roof Rack on a 2024 Toyota TundraThe Thule WingBar Evo system that fits your 2024 Toyota Tundra uses 60" crossbars which are too short to allow enough clearance for the Thule Hullavator Pro # TH898 to keep from hitting your vehicle during use. Instead you'll need to use the Yakima JetStream system and upgrade to larger bars, so you'll need the following parts: - 70" JetStream Crossbars # Y00427 - BaseLine Towers # Y28TR - BaseClips # Y06121 and # Y06129 - Lock Core Kit # Y07204 (optional) These longer bars will give...
view full answer... - Recommended Roof Rack and Kayak Carrier for 2021 Toyota TundraBecause they're a lot more quiet than square or round profile crossbars, I'd recommend a roof rack with aero-style crossbars. I really like the quality and the ease of use provided by the Yakima JetStream roof rack, which can be assembled from the following parts: • JetStream 60 Inch Aero-Style crossbars part # Y00426 • BaseLine roof rack towers, part # Y28TR • Vehicle specific fit kit # Y06121 • Vehicle specific fit kit # Y06129 A lock kit is available separately as part # Y07204 To...
view full answer... - Is Rhino Rack Roof Rack Compatible with 2011 Toyota Venza with SunroofSounds like your 2011 Toyota Venza has a panoramic glass roof. Currently Rhino-Rack has no roof rack that is a fit for the panoramic glass roof. However we do have a solution for you. The Yakima roof rack, which consists of parts 58" crossbars # Y00409, BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06129 and # Y06131 is a confirmed fit for your Venza. Please consult the vehicle owners manual and/or Toyota for the roof weight carrying capacity prior to loading.
view full answer... - Which Yakima Base Clips for 2011 Toyota Tundra to Use with Existing Yakima CrossbarsAll of the parts you're looking for can be purchased separately, so you can re-use existing crossbars for your 2011 Toyota Tundra. The parts you're looking for that correspond to your BC121 with B-30 clip and #4 Landing pad can be found with Yakima part # Y06129. The BC129 with B-58 clip and #5 landing pad is available with part # Y06121. If you don't already have the Yakima Base Line Towers you can get 4 of those with part # Y28TR.
view full answer... - Yakima Roof Rack System For a 2019 Toyota Corolla Hatchback Naked RoofYou will need the following parts for installing a Yakima roof rack on your 2019 Toyota Corolla hatchback. Yakima JetStream Crossbars # Y00425 BaseClip Fit Kit # Y06129 BaseClip Fit Kit # Y06131 BaseLine Tower # 8880618 Qty: 4 Torque Wrench # 8881045 You can use the Yakima Same Key System to secure the bars. We have a set with 4 Locks # Y07204 to secure just the towers or a set with 8 Locks # Y07208
view full answer... - Roof Rack Placement and Recommendations for a 2009 Toyota Venza with Naked RoofThe roof rack options for a 2009 Toyota Venza include custom fit kits that must be placed in certain locations on the vehicle. The measurements for them are included in the installation instructions. Regarding bar spread (the center to center distance from one crossbar to the other) on your Venza it will be 27-1/2 to 33 inches apart depending on the roof rack you choose. A wider spread offers more stability. For a 33 inch bar spacing I recommend the following set up: Yakima CoreBar Crossbars...
view full answer... - Kayak Carrier Solution for 2019 Tundra CrewmaxI looked up the tonneau cover you have on your 2019 Toyota Tundra with a 5-1/2 foo bed and the deck rail system and it's going to prevent you from being able to install a ladder rack to carry kayaks since it covers up the tops of the bed rails. So you'd probably best served with a roof rack like the Yakima HD rack part # Y01157, # Y28TR, # Y03541, # Y06121, and # Y06129 for the kayaks and lumber. For a kayak carrier you could then use the JayLow part # Y04073.
view full answer... - Wider Spread Roof Rack Recommendation for 2015 Toyota Venza with Naked RoofThe only wider crossbar roof rack we have available for your 2015 Toyota Venza is the Yakima part numbers # Y00409, # Y28TR, # Y03536, # Y06129, and # Y06131 that you mentioned which has 33 inches of crossbar spread. Most Thule roof accessories that are designed for square bars are also designed for round bars so this should still work great for you.
view full answer... - Will Malone Cargo12 Cargo Box # MPG901 Fit a 2018 Ford Ecosport Titanium?The Malone Cargo12 Rooftop Cargo Box # MPG901 will fit your 2018 Ford EcoSport if you have a roof rack with crossbar spread within 24" - 28". It will work with all types of crossbar styles. If you need a roof rack, we actually don't have any options available for your vehicle that will work with the required crossbar spread of the Malone Cargo12. For a roof rack, I recommend the Yakima JetStream Crossbars # Y00425 with the BaseLine Towers # Y28TR with BaseClip Fit Kits # Y06129 and #...
view full answer... - Yakima CoreBar Roof Rack Installation Measurements for a 2015 Toyota Tundra CrewMaxWhen installing a Yakima roof rack on your 2015 Toyota Tundra CrewMax that utilizes the BaseLine Towers, like the Corebar Roof Rack parts # Y00422, # Y28TR, # Y06121, and # Y06129, you want to position the front of the front crossbar 11-3/4" back from the corner of your roof. Then from the front of the front crossbar to the front of the rear crossbar you want to have a distance of 32". This is known as your crossbar spread. Let me know if you have any other questions or if you have a...
view full answer... - How to Carry Cargo or Use Bike Rack With 2019 Toyota Corolla HatchbackWhile there is a fantastic option to carry cargo with your 2019 Toyota Corolla Hatchback, there are currently no trailer hitches available for this vehicle. If you were looking for a way to haul cargo as opposed to towing with this your car, I strongly recommend a roof rack, which will let you you use the same type of accessories as a hitch, not to mention give your '19 Corolla Hatchback a cool aesthetic. The roof rack I strongly recommend is from Yakima and consists of: - Yakima JetStream...
view full answer... - Roof Rack Recommendation that Fits 2011 Toyota Venza with SunroofYakima has a roof rack that fits the 2011 Toyota Venza with a naked roof and a sunroof, but Thule does not have any fits so I can't recommend any of them for you. For an aero style roof rack that fits you'd want the Yakima Corebar roof rack part numbers # Y00422, # Y28TR, # Y06129, and # Y06131 which is a confirmed fit.
view full answer... - Roof Rack Recommendation for a 2016 Toyota Tundra CrewmaxYakima makes a roof rack that is confirmed to fit your 2016 Toyota Tundra Crewmax. For that you would want the part numbers # Y00409, # Y28TR, # Y03536, # Y06121, and # Y06129. Your moonroof would be compatible with this rack. I also was able to get a picture of this rack installed on a Tundra very similar to yours.
view full answer...
- What Crossbars do I need to Attach a Thule Hullavator on a 2016 on a 2016 Toyota 4Runner?The crossbars you would need can include round, square, aero, elliptical, and most factory crossbars. The Hullavator cannot go on factory bars. With that being said, the Yakima CoreBar Crossbars # Y00421 will allow you to attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898. The Minimum crossbar spread on the rack is 24 inches, and the Stingray needs to have a maximum width of under 36 inches. Depending on if you have a naked roof, a flush roof, or raised...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Video by:
Andrew K
Video by:
John S
Expert Research:
Jameson C
Video Edited:
Dustin K
Test Fit:
Hayden R
Written by:
Daron K
Updated by:
Brian T
Updated by:
Michael B
Installed by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.