Folding Steel Ramp for Pro Series Solo Cargo Carrier - 48" x 31-1/2" - 400 lbs
(5 reviews)
Price: $229.21
Folding Steel Ramp for Pro Series Solo Cargo Carrier - 48" x 31-1/2" - 400 lbs
Retail:$450.00
Our Price: $229.21
You Save: $220.79
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (5)
- Q & A (0)
- Videos (1)
- Photos
Pro Series Accessories and Parts
- Hitch Cargo Carrier
- Flat Carrier Parts
- Ramp
- Pro Series
Turn loading and unloading of heavy equipment onto your Pro Series Solo hitch-mounted cargo carrier into a hassle-free endeavor with this steel ramp. The 2-piece ramp bolts to your carrier and folds up for storage when it's not in use.
Features:
- Designed specifically for use with Pro Series Solo hitch-mounted cargo carrier (PS1040100)
- Makes it easy to load and unload heavy cargo
- Mounts to the side of your Solo cargo carrier with bolts (included)
- Requires you to remove 1 end rail on the Solo
- Folds up for storage when not in use
- Secures in place with included lock pins and spring clips
- Constructed of rugged steel with corrosion-resistant black powder coat finish
Specs:
- Quantity: 1 ramp
- Dimensions: 48" long x 31-1/2" wide
- Weight capacity: 400 lbs
- Ramp weight: 35 lbs
- 1-Year limited warranty
1040200 Folding Steel Ramp for Pro Series Solo Cargo Carrier - 400 lbs
Item # PS1040200
California residents: click here
Video of Folding Steel Ramp for Pro Series Solo Cargo Carrier - 48" x 31-1/2" - 400 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Pro Series Solo Cargo Carrier Folding Steel Ramp Review
If you got some heavy stuff with wheels on it, whether it's a generator, a scooter, or a mower, or snowblower, the Reese cargo carrier with the ramp is gonna make it a lot easier to load and unload those heavier stuff. Right here is what's gonna activate the ramp or at least just allow it to go down, this little pull pin. We're gonna pull this and then this bracket goes up like that and we're gonna fold out just like this. Then we could take our stuff and wheel it on out. Everything that you do plan on wheeling up here, there's gonna be a best way of doing it. I think this was the best for our generator.
And this generator is so heavy. It's like 230 pounds or something like that, which is a lot. But the ramp definitely helps it, 'cause I am not lifting this thing up by myself. So it makes a two-man job a one-man job with our ramp. The ramp is 48 inches long and 31 1/2 inches wide.
You just wanna measure the width of the wheels on whatever you're loading up to make sure it's gonna work with it. And the way it's designed, I do like how the hinge goes like this because this is gonna be a very, very solid part. It's also made of steel. So even when I walk up on it, you don't really see a whole lot of flex. It's very, very rigid.
Here's how we fold the ramp up. We just take this little strap here, which is nice so they added that, makes it really easy, and fold this up and then fold this down, using the strap the whole time. And then we take this bracket over, put it like that, take our pin back. Whenever we fold this in, it's just gonna change the interior length and width minus 1/4 inch, so it's not really changing it a whole lot. So you can still pretty much use the whole thing when it's all folded up.
Let's do some measurements. From the base of the platform to the top, it's gonna be about 26 inches or so. Last time I actually just backed this thing up and walked on the carrier, but I'm gonna try this way, this time. It all just depends on what you really have. All I know is that, yeah, that was a little hard to push it up there, but my vehicle's a little tall but also it's literally impossible for me to be able to lift this thing up and get it onto the carrier nice and easy. So making it a one-man job is definitely worth it for me. And that'll do it for a look at the Reese cargo carrier with the ramp..
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Folding Steel Ramp for Pro Series Solo Cargo Carrier - 48" x 31-1/2" - 400 lbs - PS1040200
Average Customer Rating: 4.8 out of 5 stars (5 Customer Reviews)
Turn loading and unloading of heavy equipment onto your Pro Series Solo hitch-mounted cargo carrier into a hassle-free endeavor with this steel ramp. The 2-piece ramp bolts to your carrier and folds up for storage when it's not in use.by: Terry Ayers06/22/2016
Well built, easy assembly. Lighting fast shipping.
by: Mark 10/29/2020
I have an alternate use for the two ramps I purchased but the quality and price are excellent.
by: Mark10/29/2017
Nice strong product, plan on using it for a trailer i bought that was missing the ramp.
by: Julio03/26/2018
Good product. Gave 4 stars since one of the holes arrived bent and I had to get it straight with a rubber mallet.
by: Stephen 01/20/2022
Great product Great service
5
5
See what our Experts say about this Pro Series Accessories and Parts
- Blue OX Base Plate for a 2021 Jeep Grand CherokeeThanks for being a loyal customer. For your 2021 Jeep Grand Cherokee I recommend the Blue Ox Base Plate Kit item # BX1128. The hidden design provides a clean, seamless look. The arms remove with a simple twist when not in use.
view full answer... - Ramp for Pro Series Trailer Hitch Mounted Cargo Carrier # PS1040100, 2006 Dodge Grand CaravanI have included a link below to the Folding Steel Ramp for Pro Series Solo Cargo Carrier, # PS1040200. Current pricing and information can be found on the product page. As you have stated, the ramp is designed to fit Pro Series Solo hitch-mounted cargo carrier # PS1040100. You can also order the cargo carrier with the ramp already attached. Take a look at the 32x48 Pro Series Steel Solo Cargo Carrier and Folding Ramp, # PS10401-10402. The cargo carrier will fit your 2006 Dodge Grand Caravan...
view full answer... - What is Pro Series Ramp Kit # PS1040200 Designed to FitIf you could come up with a way to secure the ramp part # PS1040200 to a utility trailer it would be possible for it to fit and work well, but we don't have a recommended way to accomplish this. This is designed to fit the Pro Series cargo carrier part # PS1040100 instead. For utility trailer ramps we have the part # 288-07489 instead which would be better for your purpose.
view full answer... - What Does Pro Series Cargo Carrier Ramp # PS1040200 Look Like InstalledI attached a picture of what the Pro Series Ram part # PS1040200 looks like when installed on a # PS1040100 for you to check out. This is a fixed cargo carrier that does not fold up.
view full answer...
- Does Ramp Come with the 32x48 Pro Series Steel Solo Cargo Carrier # PS10401-10402The ramp part # PS1040200 comes with the part # PS10401-10402 so you would not need to order it separately.
view full answer... - Does 32x48 Pro Series Steel Solo Cargo Carrier Come with RampThe part # PS1040200 is just the ramp. For the ramp and carrier together what you would need is the part # PS10401-10402.
view full answer... - Folding Ramp Needed that is 60 WideThe Folding Steel Ramp # PS1040200 that you referenced is actually a fit for Pro Series cargo carriers that fit in a trailer hitch receiver directly which is why it has a shorter width. Although we don't have a ramp that installs permanently, we do have plenty of ramp options for loading cargo in your trailer. I have linked a page that includes the removable options that we do have but the closest thing would be the CargoSmart Loading Ramp Set # 3483075 which measures 69" long and 45" wide.
view full answer... - Can Reese PS1040100 Cargo Carrier Be Used for Carrying RototillerAs long as the footprint of your rototiller will fit upon the 47-3/4" long x 31-3/4" wide inside dimension of the # PS1040100 carrier, it'll work perfectly for you. The factory hitch and the carrier is more than capable of handing the weight of the tiller. I'd also recommend a locking hitch pin like # e98882 and some ratchet straps like # EM34415 from Erickson, if you don't already have some. You might also be interested in the optional # 6504 light kit and the # PS1040200 ramp kit. The...
view full answer... - Folding Steel Ramp for Pro Series Solo Cargo LengthThe length of the ramp # PS1040200 is 48 inches long when folded out and 31-1/2 inches wide. For more info check out the review video I attached as well.
view full answer... - Trailer Hitch and Cargo Carrier for a Power Chair on a 2003 Toyota CorollaI do have a potential solution for you. First, the available trailer hitches for your 2003 Toyota Corolla, # C11265 or # 24913, are Class I trailer hitches. But there are Class I compatible cargo carriers. The only thing is they do not have ramps so you would need to retro fit a ramp onto the carrier you choose. The Class I compatible cargo carrier I recommend is the Curt 19 x 47 inch carrier # C18110 . We do have a ramp by itself that fits a different carrier, # PS1040200, but it is wider...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Chris R
Written by:
Tyler C
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Ronnie R
Video by:
Adam E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Terry A.
6/22/2017
After a year of use the product has exceeded expectations. 100 [percent] satisfied.