Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
(21 reviews)
Price: $259.83
In Stock
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Item # DT23MR
Retail:$343.77
Our Price: $259.83
You Save: $83.94
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (21)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - DT23MR
- Class II
- 1-1/4 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 300 lbs TW
- Custom Fit Hitch
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Drawbar and pin and clip sold separately
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 300 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
37135 Draw-Tite Class 2 Trailer Hitch Receiver - Custom Fit - 1-1/4"
Installation Details
This Product Fits The Following Vehicles
- 2021 - 2024 Nissan Rogue
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Arrived Damaged
Customer Reviews
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - DT23MR
Average Customer Rating: 4.7 out of 5 stars (21 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.by: 04/18/2024
We love working with etrailer.
by: Ernie05/04/2023
I confirmed the product quantity and when to be delivered. After the first order time elapsed I called to find out that none have been shipped. 5 working days wasted. Reordered the amount needed less one unit due to the quantity that I confirmed was incorrect on the available stock, even though I confirmed the quantity. After the second order time elapsed, still no product I called to see why and was given no answer. At that time I located two units from Meyer Distributing, ordered them and they were here the next day. With a quantity of 4 units promised, two units arrived from etrailer in three days. I am still short two units from etrailer that are now late. With etrailer missing delivery dates by three weeks I should have just ordered 6 units from [distributor].
by: Elder Glenn McMinn04/13/2023
We have a fleet of approximately 100 vehicles with hitch mounted bycycle racks. They have worked perfectly for us.
by: 06/08/2021
2021 Nissan Rogue
Absolutely excellent hitch. Looks clean and the install was fairly easy. Took less than an hour with 2 people. Didn't have to raise the car at all either. Can't wait to use it!
by: Jonathan05/14/2021
Super easy install, 2021 rogue has weld nuts already on the frame, lift in place insert 6 bolt and torque down. Tucks up under the bumper nicely.
by: Tom 06/13/2023
Hitch installed without any major issues. Had to open the sides of the hitch a little bit. Slide right into place then. Was easier with 2 people working together.
by: Scott 06/10/2021
2021 Nissan Rogue
Could not have bee easier to install. The Rogue has the threaded nuts already in the frame. Just put the hitch in place, insert the bolts and tighten.
by: Obdy06/04/2021
2021 Nissan Rogue
Received the part today it fits PERFECTLY!!! I am very pleased with this seller I recommend him to everyone, communication with seller was fast and accurate every time. I am a Very happy customer!
by: Elder Jeffrey Burt04/04/2023
I was happy to get the hitches quickly. They we wrapped in plastic, but the sharper edges were not protected from the plastic being cut-through and rubbing off of paint.
by: Elder Jeffrey04/12/2023
They came all together today (4/12). Thank you.
by: Elder05/17/2022
Great bike racks and they meet our needs really well!
by: Val 09/06/2022
The service was exceptional and every time I need to make a new order, I am treated with respect and knowledge. Thanks.
by: Brian06/30/2022
Great buying experience and great produ ct.
by: Pam 10/11/2021
Pam
10/12/2022
Great bike rack and hitch. I have the platform rack and hitch on my Nissan Rogue and love it. Easy loading. I especially like the lock on the each and the hitch.
by: Bruce 05/14/2021
Very easy to install 30 min myself also very well made
by: Bob12/02/2021
Everything shipped fast and product as promised.
by: Elder09/06/2022
by: Elder Christensen09/06/2022
by: Charles 04/13/2023
by: Dan 07/06/2021
2021 Nissan Rogue
by: Chris05/13/2022
21
21
See what our Experts say about this Draw-Tite Trailer Hitch
- Does Draw Tite Hitch DT23MR Fit 2021 Nissan Rogue SLYes the Draw Tite hitch part # DT23MR is a fit for all models of the 2021 Nissan Rogue including your SL model.
view full answer... - Is Draw Tite Hitch # DT23MR Compatible with 2021 Nissan Rogue SL Hands Free LiftgateThe Draw Tite hitch part # DT23MR that you referenced is a confirmed fit for your 2021 Nissan Rogue and also is compatible with the hands free liftgate you have as well. Basically you'd just have to kick to either side of the hitch opening and you'd be set.
view full answer... - Recommended Hitch for 2021 Nissan Rogue SVThe Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # DT23MR is confirmed to fit all 2021 Nissan Rogue models, including your SV. Unless you specifically want a 1-1/4" hitch, I recommend the # DT85MR Draw-Tite Max-Frame Class III 2" hitch instead. The 2" receiver is the most common size, and you will gain an additional 225 lbs of tongue weight capacity. I also recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C44ER if you plan...
view full answer... - Hitch Installation Locations on a 2021 Nissan RogueYes, we have multiple installers that we can recommend all across the country. You can find them on the product page beneath the pictures where it says locate installers near me. You will be able to put in your zip code and find multiple shops in your area. The Draw-Tite Hitch item # DT23MR you were looking at has a 4 out of 10 on our difficulty to install scale and it should take someone with experience around 40 mins to install. I can confirm that the Draw-Tite Trailer Hitch Receiver...
view full answer... - Less Visible Trailer Hitch for 2021 Nissan RogueThat hitch does stick out pretty far on your 2021 Nissan Rogue! I can certainly understand wanting something a bit more recessed. We have the Curt hitch # C24HR which is much more recessed like you can see in the picture I attached. I could be wrong but it looks like you have the Draw Tite # DT23MR installed.
view full answer...
- Class III Trailer Hitch and Wiring for 2021 Nissan Rogue Plus 4-Way Mounting Bracket SolutionFor your 2021 Nissan Rogue AWD SL model we do have the Curt Class III hitch part # C24HR does hug closely to the lower rear bumper area. Since this hitch only has the hitch opening hanging below the rear bumper and hugs so closely there isn't a good place to mount a 4-way bracket like for the 4-way harness # C44ER that fits your vehicle. So your best option would be to mount the part # 18144 to your rear bumper instead. This also allows you to put the bracket in more places to make it...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Chris R
Video by:
Dustin K
Updated by:
Leah S
Test Fit:
Ryan G
Test Fit:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Pamela M.
6/10/2022
I have been asked to update my review. Yes, install was super easy. Ran into QC issue after 1st use. The inside of the receiver had bulges. The bike rack was an extremely tight fit. To remove it I had the strap it to a post and use car to drive away. I had to grind out material to correct this.