Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 part number: Y00421
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
Aero-style, steel crossbars let you build an aftermarket roof rack for your vehicle
Pair with Yakima towers and a fit kit
Aerodynamic, teardrop shape helps to create a quiet roof rack system
Controls air flow to significantly reduce wind noise and vibration
Reduces drag to help maintain your fuel efficiency
Full-length crossbars maximize space for clamp-on carriers and accessories
Accommodate most universal-mount bike, water, snow, and cargo carriers
Easy installation on Yakima towers with included brackets and hardware
Works with BaseLine, RidgeLine, SkyLine, and TimberLine towers
Roll-formed, galvanized steel bars are extremely strong and durable
Black vinyl coating protects the bars from corrosion
Plastic endcaps help to keep water and debris out of bars
Specs:
Quantity: 2 crossbars
Crossbar weight capacity: 220 lbs
Always observe your vehicle's maximum roof load capacity
Dimensions: 50" long x 2-3/4" wide x 1" tall
Limited lifetime warranty
The aerodynamic Yakima CoreBars let you build a quiet yet heavy-duty roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. The bars are constructed of galvanized steel so they can carry more weight than traditional aluminum aero bars. And they're coated in black vinyl to help prevent corrosion.
Aerodynamic Design
The CoreBar's teardrop shape controls air flow over and under the bar to significantly decrease wind noise and vibration even at highway speeds. This lessens the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Heavy-Duty Steel Construction
The Yakima CoreBar is constructed of roll-formed, galvanized steel. This heavy-duty steel construction enables the CoreBars to carry significantly more weight than traditional aluminum aero bars (up to 220 lbs depending on the weight capacity of your roof). The bars are also coated in black vinyl to protect them from corrosion.
Hassle-Free Installation
The CoreBars install on any of Yakima's StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine - with included brackets. Just remove the endcaps, slide the brackets onto the bars, and replace the endcaps. Then place the bars on your towers with the brackets seated in the tower BarBeds. Use the torque tool included with the towers to tighten the bars in place.
Maximum Cargo Carrying Capacity
The full-length CoreBar extends past your towers to provide more space for mounting carriers and accessories on your roof. The CoreBar is also compatible with most universal, clamp-on carriers and accessories.
8000421 Yakima Core Bar Cross Bars - Steel - Aero Profile - 50" Long - Qty 2
BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 part number: Y28TR
Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation.
Features:
4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
Pivoting bases can be adjusted during installation to ensure towers are seated correctly
Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
Also fit RoundBar crossbars with adapter
Safe and easy installation with DropHook system and included torque tool
DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
BaseClips attach to hooks in tower assemblies and tighten for a secure grip
Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
Specs:
Maximum tower load capacity: 220 lbs
Limited lifetime warranty
The heavy-duty BaseLine towers allow you to mount 2 Yakima crossbars to your vehicle with a naked roof. The towers can be adjusted during installation to ensure your crossbars are level and that the rack is seated correctly on your roof. The BaseLines' versatile BarBeds accommodate Yakima's full line of crossbars. The towers install with Yakima's DropHook system and BaseClips .
Versatile BarBed
The BaseLine's BarBed is specifically designed to work with Yakima's entire line of crossbars.
The BarBed is curved to accommodate the elliptical shape of the CoreBar and JetStream crossbar. The CoreBar includes brackets that slide over the bar and secure to the towers with bolts. The JetStream attaches directly to the tower with bolts.
The towers also work with Yakima RoundBars with adapters . The adapters slide over the bars and secure to the towers with bolts.
The crossbars mount to the BaseLine towers with the included torque tool. The tool clicks 3 times once you've reached the correct amount of torque so you don't have to worry about over- or under-tightening. This is the only tool you will need to secure the bars to the towers and the towers to your roof.
Adjustable Pitch and Toe Angle
The pitch and toe angle of each tower adjusts to provide a level mounting surface and to ensure the rack is seated correctly on your roof. To set up, install the towers on your crossbars and place them so the bottoms of the towers are facing up. Next, adjust the pitch and toe angle to the correct position as indicated by your fit kit's instruction manual. The pitch adjustments are labeled A, B, and C, and the toe angle adjustments are labelled 1, 2, and 3. Once these are set place the rack on your roof.
Secure Installation with DropHook System
The towers install with custom-fit BaseClips . To mount a tower remove the cover, open the door inside the assembly, and attach the BaseClip to the hook inside the tower. The clip adjusts on 3 axes as you tighten it to ensure a safe and secure fit. Once the clip is tightened down, close the door to secure the clip in place.
Same Key System Locks
BaseLine towers are compatible with Yakima SKS lock cores (Y07204 - sold separately) that allow you to secure the roof rack to your roof. The SKS locks are all keyed alike so a single key opens all the locks. The locks can also be swapped out to make all of your Yakima products keyed alike.
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06180
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006180 Custom Base Clips and Pads for Yakima Base Line Towers
Replaces Yakima Y06158 (8006158)
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 part number: Y06169
These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
Features:
Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
Padded, stainless steel clips provide secure grip on your door jambs
Snap onto DropHooks inside towers
Protect door jambs from scratches and abrasions
Powder coated for durability and rust resistance
Molded rubber pads fit the contours of your roof
Clip onto bottoms of towers
Protect roof from scratches and abrasions
Specs:
Quantity: 2 clips and pads
Limited lifetime warranty
DropHook System Installation
Custom-fit BaseClips let you mount BaseLine towers to your vehicle with a naked roof. To install, remove the tower's cover, open the gray door inside the assembly, and attach the clip to the DropHook inside.
The clip adjusts on 3 axes during installation to ensure a perfect, secure fit on your door jamb. Once the tower and clip are seated correctly, simply tighten the clip down, close the door, and replace the cover.
The included molded rubber pads protect your roof from scratches and abrasions. The pads easily clip onto the bottoms of the towers and are specifically designed to fit the shape and contour of your roof.
8006169 Custom Base Clips and Pads for Yakima Base Line Towers
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06180
BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 - Y06169
Average Customer Rating: 4.8 out of 5 stars (2139 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories. Heavy-duty towers allow you to mount 2 Yakima crossbars safely and securely to your vehicle with a naked roof. Tower pitch adjusts to create a level roof rack on curved roofs. Includes torque tool for worry-free installation. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers. These custom clips and pads let you mount Yakima BaseLine towers on your vehicle with a naked roof. Clips attach to hooks in tower assemblies, and pads clip to bottoms of towers.
by: Cody05/25/2023
I've just recently installed this setup on my 2015 Toyota Camry.
etrailer - Shopping for this rack was fairly simple, and the shipping from etrailer was quick and reliable. I received the rack in 2 different shipments but they both arrived at the same time. etrailer made sure the all the contents were available. They also have several resourceful videos on their YouTube page, which was helpful while shopping for the rack and during a few trouble shooting items while I was installing.
Yakima Core Bar - Overall a quality product. Everything necessary was supplied, including a handy measuring tape and some very well written instructions. The fit is clean and very sturdy. The only qualm I have is that the hex hole in the large anchor bolts are a bit larger than the supplied hex driver. Toward the end of the installation, the tool was worn and ended up turning inside the bolt itself (not due to over torquing whatsoever). I ended up having to use a hex set I had in my toolbox to complete the installation because the provided tool was starting to strip out the anchor bolt. With that said, the kit is still a great kit that meets my expectations.
Wind noise is quieter than my OEM VW bars on my 2017 Volkswagen GTI. It's noticeable, but nothing extreme - I believe that's just the price you pay when adding crossbars to a vehicle.
Verdict - etrailer has definitely met my expectations, and the Yakima kit provided is a well designed kit that fits well!1586533
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of etrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.1691344
Very good product. The Yakama towers and cross bars feel very solid and appears to be high quality. Very easy install. Others have complained about the instructions, but guess I'm a visual person because the pictures all seemed very clear to me and the install was very easy. They do sit higher than I expected. After adding a Rhino Rack cargo basket, we only have about 4-5" clearance below the garage door.329453
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.1750050
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!1733360
by: 04/01/2024
Follow the instructions, and you can't go wrong on the self installation1757391
by: Lisa04/12/2019
Honda Ridgeline
These crossbars feel like they are well made and sturdy. It took less than 30 minutes to install with the Ridgeline Towers. I love the look of the bars! Can't wait to load the Kayaks up and get out on the water. 625642
Timely delivery of my order, as usual! Easy to install on my 2015 4Runner. After I had the mounts ready and put on both bars, I installed the front one and fine-tuned it, the second took even less time then. I now have the ability to carry up to 3 kayaks, perfect! etrailer is a great company!501204
My experience with etrailer has been excellent. There was going to be a potential delay in one of the products, but their customer service promptly informed me, half the price of some of their competitors so can't really complain. In the end they got the part ahead of schedule and was able to ship in a timely manner. I will definitely keep them in mind for future purchases.517728
The clips are fine . I will review etrailer. I needed just clips I asked them which ones they told me. Great place.1630116
by: Bryan 01/31/2024
Clips are perfect and the etrailer.com experience was great. Ordered on a weekend and had the clips as promised by the following Wednesday.1716841
by: John 09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.1661821
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.1614146
by: Richard R02/20/2023
2022 GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.1521562
by: J-fan05/04/2024
Excellent quality! 1779044
by: Rafael07/03/2020
Roof rack fits and works as advertised. Over the phone customer support for sales and install directions were very helpful and thorough. Geoff is an excellent brand ambassador who goes above and beyond to fulfill customer expectations. I will definitely be shopping at etrailer for my future vehicle needs. Well done! 830131
All parts fit my Ford Maverick like a glove! Easy to install, and ready to take the canoe out.1655762
by: Laura 04/01/2024
As described! Quick delivery! 1757433
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself) Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.1651440
by: Steve30001/14/2023
Very sturdy, well made. The assembly instructions are not too good but if you call Yakima they will provide additional instructions.1499866
by: Alfredo07/25/2022
THERE'S A PIECE MISSING, A rubber cap on 1 of the crossbars1337690
by: Emma S.06/27/2020
I am thrilled this got delivered sooner than anticipated! It was quite easy to install once you started actually putting it together and measuring everything out. I like that this can easily be removed and installed onto the vehicle.837238
Although we don't have a traditional roof rack available for your vehicle, we do have an option that would work for you.
In the case of your Q60, the primary fit issue for a traditional roof rack is the fact that the vehicle is a coupe with a very short roof line. Since the front and rear crossbars attach using the top of the vehicle's door jamb, on your particular vehicle the crossbars would be very close together, too close for roof rack mounted accessories to attach to the crossbars.
The view full answer...
Yes! As long as you have the exact same OEM flush rails that come with 2017 Honda CR-Vs that have the flush rail option from the factory, you can use the Yakima SkyLine Towers # Y53TR with your CoreBars # Y00421. In addition to these parts, you also need the Landing Pad 19 # Y00245 in order to mount the towers to the fixed mounting points in your rails.
If you need the peace of mind of adding locks to the setup, those are the Yakima Same-Key Lock Cores # Y07204. These lock your crossbar view full answer...
You will not remove the plastic strips on your 2018 Mazda CX-5 when you install a roof rack that is compatible with your vehicle. Aesthetics aside, none of the roof racks I have installed on the naked roofs of my personal vehicles have ever leaked. I do like the Inno option:
Inno Aero Crossbars - Aluminum - Black - 42" Long and 45" Long - Qty 2, part # INXB108-115
Inno Flush Feet for Aero Crossbars - Naked Roofs - Qty 4, part # INXS200
Custom Fit Kit for Inno XS200, XS250, and INSUT view full answer...
The Timberline is actually the towers # Y33TR, so you will either have the CoreBar crossbars # Y00421 or the JetStream # Y00426. You can trim these bars to a shorter length and I do recommend using a new hack saw blade to do so. The aluminum crossbar will cut easily so you will want to make sure you have a very straight cut and take it slow or you would easily mar your bars. Make sure you double check your fit before making any cuts. view full answer...
For your 2022 Hyundai Santa Fe, along with the Yakima CoreBar Crossbars # Y00421 you mentioned, you're also going to need the BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR and the Fit Kit # Y06151. view full answer...
The specifications I have access to indicate that RX-350's come with flush mounted roof rails that run from front to back. You will need cross bars with towers (feet) and a fit kit for your RX-350. I recommend the Yakima # Y00421 cross bars and you will then need to add # Y00145 towers and the # Y06027 fit kit. I recommend this model as it has an aerodynamic shape that will generate less wind noise when driving and is the sleekest looking. (If it turns out that you do not have flush view full answer...
You can definetly install a roof rack system onto your 2013 Toyota Camry with a sunroof. I recommend the Yakima Roof Rack System which consists of four items. Yakima CoreBarCrossbars # Y00421, Yakima BaseLine Towers # Y28TR, Fit Kit # Y06119 and Fit Kit # Y06125.
This system will allow you to carry multiple accessories like cargo carriers, kayak carriers, and bike racks on the roof of your vehicle and using the Yakima Same Key System Lock Cores # Y07204 will lock the roof rack to your view full answer...
Since the kit that involves parts # Y00421, # Y28TR, and # Y06159 in your question, I assume you have a 2017 Kia Sorento with a bare roof and no factory rails. If this is the case, while we do have a solution you can use, you unfortunately cannot mount a roof top tent to your roof. This is because all of the roof racks we carry use door jamb clamps to mount the crossbars to your vehicle. Manufacturers strongly advise against using roof racks that use this attachment style because the clips view full answer...
For your 2017 Toyota Prius V with the panoramic roof, I do recommend the Yakima CoreBar Roof Rack System that you referenced. This system consists of # Y00421 for the two 50 inch CoreBar Crossbars, # Y28TR for the BaseLine Towers and the # Y06117 and # Y06174 Fit Kits.
This will give you everything you need to install the roof rack on your vehicle. Each part number consists of the quantity needed for your application, so you will just order one of each. The two Fit Kits, # Y06117 and view full answer...
We do have a large selection of roof-mounted bike racks that will work perfectly on the flat aero-style Yakima Core Bar crossbars like # Y00421 that you have on your Land Rover. I recommend taking a look at the Thule ProRide XT # TH598004. This carrier will actually secure your bike by the frame so you don't have to take off the front wheel and it has a weight capacity of 44 pounds. A bike lock is also included to help protect your investment.
I have attached a short video demonstration view full answer...
I do have a solution for you, however the older Rhino-Rack 2500 Roof Rack DS1375B referenced in your question is not compatible with the roof on your 2014 GMC Terrain.
If your GMC Terrain has a naked roof (no existing rails or crossbars), then I recommend the Yakima CoreBar Roof Rack System. This consists of # Y00421 for the two 50 inch aero-style crossbars, # Y28TR for the BaseLine Towers, # Y03536 for the RoundBar SL Adapter and # Y06146 for the BaseClip Fit Kit. This will provide view full answer...
Yakima does have a way to install a set of their round crossbars like the part # Y00408 on the roof of your 2015 Subaru Outback Wagon with the parts # Y53TR, # Y03536, and # Y00241 and you'd be set. view full answer...
The Rola Sport Series Roof Rack with APE Mounting System, part 59714, is discontinued as it # 59715.
An alternative is the Yakima # Y00421 crossbars, with # Y00148 towers, and # Y00248 landing pads.
There is no drilling involved to install this roof rack. The 2004-2009 Mazda 3 5dr Hatch vehicles came with pre-installed anchoring locations that this roof rack bolts too. I would double check and make sure you find those anchoring points on your vehicle. view full answer...
Yes, the Yakima CoreBar roof rack (parts listed below) will fit the raised rails on your 2009 Subaru Outback Wagon and allow you to carry your Space Cadet roof box. Here are the parts you need:
50" CoreBar - # Y00421
TimberLine Towers - # Y33TR
Lock Core Kit - # Y07204 (optional)
If you end up needing anything else please let us know! view full answer...
It sounds like you have the Yakima CoreBars like the # Y00421 with Skyline towers. We do have the replacement "strap" that allows you to attach the CoreBars to the Skyline towers.
That is the Replacement Adapter and Seat for Yakima CoreBar Crossbars # 8880639. view full answer...
For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed.
For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached. view full answer...
We can offer you several options in an ultra-quiet aerodynamic type roof rack system for your 2014 Toyota Avalon Hybrid with a sun roof. You can choose from racks whose shorter bars terminate in the foot assemblies, for a cleaner more-OEM look, or you can select a rack with longer aero bars that extend through the feet to provide a larger surface for loading your cargo. Available bar lengths range from 42- to 54-inches. All options are shown on the linked page.
The system I like for view full answer...
I checked with Yakima and the Baseline rack part numbers # Y00421, # Y28TR, # Y06102, and # Y06139 that you referenced is a confirmed fit for the 2016 Ford Edge with a Panoramic Vista Roof. I attached a couple pictures that I got from their fit guide that shows that the smaller feet fit perfectly on the top of the metal of the roof and that is how they are able to fit the rack. view full answer...
There are a couple of differences between the two. The JetStream bars like # Y00425 are made of extruded aluminum while the CoreBars such as the # Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has a higher capacity. The primary difference is that the JetStream bars feature the T-Slot channel at the top that allows quick and easy accessory installation, while accessories used with the CoreBars would need to clamp around the crossbar.
The view full answer...
The Yakima Baseline towers # Y28TR with the landing pad 19 will leave you about 5-1/4 inches from the top of your bar to the roof of your 2020 Honda CR-V. That being said the Yakima Showdown # Y04081 will sit about 9 inches up from the top of your bar when the kayaks are not loaded. view full answer...
There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way.
I've view full answer...
For your 2015 Volkswagen Golf TDI with a Yakima BaseLine tower roof rack installed you can use their lock core kit # Y07204. This set includes 4 lock cores, two standard keys and the control key you will use to install the cores in your BaseLine towers # Y28TR.
Please refer to the two linked videos for more on this kit and how to install it. view full answer...
The Yakima roof rack you looked at, consisting of the JetStream # Y00426 60 inch crossbars, # Y28TR BaseLine Towers, # Y06102 and # Y06139 clip kits is compatible with your 2016 Ford Edge with the glass roof, according to Yakima. The feet will sit on the painted portion of the roof, not the glass so this is perfectly safe to use.
If you let me know what you're needing to use the roof rack for I can make some recommendations for you! view full answer...
On your 2013 Nissan Rogue, there are only two Yakima towers confirmed to fit. The baseline towers # Y28TR are for the models without existing rails or crossbars. They will require the BaseClip Fit Kit # Y06123 and # Y06135. These towers will work with a variety of rails. The other towers are for the raised factory rails and don't require any clips, so you must have the baseline towers. The # Y06135 are for the rear crossbar towers and the # Y06123 is for the front crossbar towers. view full answer...
In 2016 Yakima transitioned away from the Q-Towers and started using their BaseLine system. According to Yakima there are no Q-Clips that will fit your truck so the only option is to switch to the new towers. For the 2021 Silverado 1500 Crew Cab you need the BaseLine Towers # Y28TR and BaseClip Fit Kit # Y06110. These will work with JetStream bars like # Y00426 or CoreBar crossbars like # Y00422. They will also work with RoundBar Crossbars # Y00409 using the adapter # Y03536 or HD Crossbars view full answer...
I reached out to my contact at Yakima and there is not a Q Tower Fit for your 2016 Honda Civic 4 door. They were making the switch to their Baseline Towers at the time that vehicle was made, so that is what they fit to your vehicle.
However, they do have a fit that I recommend for your vehicle that will allow you to use your old round bar crossbars. You will want the BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR with RoundBar adapter # Y03536. You can use the view full answer...
The Thule Evolution 1600 cargo box that you referenced has been discontinued, but I spoke with my contact at Thule who was able to confirm some fits for me.
The Evolution 1600 is compatible with Yakima round bars so the system that you will want to use includes the 48" CrossBars # Y00408, BaseLine Towers # Y28TR, RoundBar SL Adapter # Y03536, and BaseClip Fit Kit # Y06102. This roof rack doesn't come with locks but they can easily be added with part # Y07204 .
If you already have view full answer...
Kason, the BaseLine Towers for Yakima Crossbars # Y28TR (4") paired with the BaseClip Fit Kit # Y27FR & # Y06124 (1"), and the Yakima JetStream Crossbars # Y00430 will leave you with approximately 6 1/2" from the top of crossbar to the top of your roof. You can take an inch and an eighth off that to get the measurement from roof to the bottom of the crossbar so that'd be 5 3/8". view full answer...
In order to mount a set of Yakima Round Bars onto a 2017 Toyota Tacoma, you'll need the following clips and tower pieces:
BaseLine Towers for Yakima Crossbars - Naked Roofs, part # Y28TR
RoundBar SL Adapter for Yakima BaseLine Towers - part # Y03536
2x Base Clip Fit Kit for Yakima BaseLine Roof Rack Towers Qty 2- Part # Y06145
Note that you will need TWO (2) of the Clip Fit Kit, part # Y06145 in order to complete this installation.
I've included a video of this installation view full answer...
I do have a great roof rack solution for you, however the Whispbar Custom Fit Kit that you referenced is designed for certain model GM pickup trucks and won't work on your Ford Fiesta. There isn't a Whispbar system currently in production that will fit your vehicle.
For a similar high-quality roof rack that will work great on your 2011 Ford Fiesta I highly recommend the Yakima JetStream system that consists of # Y00425 for the two 50" JetStream Crossbars, # Y28TR for the BaseLine Towers, view full answer...
Yakima currently only has confirmed fits for 2024 Kia Seltos models if they have raised or flush side rails so the naked roof towers # Y28TR you were looking at don't currently have a fit kit to make them work yet.
If you have raised side rails then you would need TimberLine Towers for Yakima Crossbars # Y33TR in order to use the RoundBar SL Adapter # Y03536 and Yakima RoundBar Crossbars # Y00408. If you have flush mount side rails then you would need the SightLine Towers for Yakima view full answer...
The Q150 clips part # Y00750 would be the correct clips to use on your 2015 Ford F-150 to use with a Control Tower roof rack but they have been discontinued. It sounds like you have a Yakima round bar roof rack though so I can help you piece together a few more parts to complete the rack on your truck.
You would need the BaseLine Towers part # Y28TR, the Round Bar Adapter # Y03536 and then 2 sets of the fit kit part # Y06122. With the 58 inch round bars part # Y00409 that you already view full answer...
The Q clips you'd need are no longer available from the manufacturer. To utilize your Yakima bars you would need to upgrade the rack with the following:
Round Bar Adapter # Y03536
BaseLine towers # Y28TR
BaseClip # Y06195 and # Y06196 view full answer...
The Yakima BaseLine towers part # Y28TR are a fit for your 2019 Kia Sorento but to install them to the roof of your vehicle requires the fit clip kits part numbers # Y06159 and # Y06170 which are what specifically were custom made to fit the roof of your vehicle. Then for a set of Jetstream crossbars you'd want the part # Y00425 and you'd be set. view full answer...
We do have a really great selection of roof rack systems that are confirmed to fit the naked roof on your 2019 Kia Sorento. I specifically recommend the Yakima JetStream setup that consists of part # Y00425 for the two 50" JetStream Crossbars in Black, # Y28TR for the BaseLine Towers, # Y06159 for the Front BaseClip Fit Kit, and # Y06170 for the Rear BaseClip Fit Kit.
This is going to provide you with an extremely sleek rack that will be really quiet on the road due to the aerodynamic view full answer...
To fit any current generation Yakima system to a 2015 Toyota RAV4, you'll need the following kit:
4 pack Yakima BaseLine Towers for Yakima crossbars, part # Y28TR
Yakima Base Clip 180, part # Y06180
Yakima Base Clip 169, part # Y06169
You may also need the SL Round Bar adapters, part # Y03536 if you have round bars.
There is not a Q-Tower kit available for this vehicle. view full answer...
While we have a way for you to use Yakima round crossbars on a 2019 Ram 3500, it will need to be as a roof rack application, and the reason for that is the BAK Vortrak Hard Tonneau Cover slightly covers the stake pockets of your '19 Ram 3500 and there is no way to add a rack system over the tonneau without interference.
There is also not a way to attach those crossbars to the bed of your truck, but what you can do instead, so long as your 2019 Ram 3500 is a Crew Cab or Mega Cab is use view full answer...
Yes, we do sell the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06180, which is Yakima BaseClip 180. They come in pairs. I have included a product description link below. view full answer...
I recommend going with the Yakima CoreBar system for your 2020 Hyundai Sonata. This includes the CoreBars # Y00421, Baseline Towers # Y28TR, A Clip Kit # Y06180 and Base Clip Kit # Y06153.
The CoreBar roof rack gives you a nice, sleek looking roof rack that has an aerodynamic design but is also made of steel so it's very durable. I've included a video of us installing this system on an older Sorento. Check it out! view full answer...
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.