bing tracking image

Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Part Numbers: K2AVAL8219,31367

Retail:$2,744.98
Our Price: $2,158.79
You Save: $586.19
Snow Plow

In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me



Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall
part number: K2AVAL8219

Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab.

Features:

  • Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
  • Electric winch raises and lowers plow with sturdy, nylon strap
    • 2.4 GHz Wireless remote control allows you to operate the plow from the comfort of your vehicle
    • In-cab switch serves as a reliable backup to the remote control
  • Adjustable, 3-position blade can be manually angled left, right, and straight ahead
  • Strong rubber deflector on top of plow directs snow down and away from your windshield
  • Hardened steel edge breaks up packed snow and ice
  • Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
  • Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
    • Can extend life of the plow if you hit an obstruction
  • Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
  • Red visibility markers help you see plow edges so you can steer away from obstacles
  • Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
    • Wheel height is adjustable to match your vehicle height
  • Plow handle with knob lets you easily move plow up and down during mounting
  • Safety chain holds plow in raised position during travel
  • Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
  • ISO certified
  • Simple installation
    • Slides into your vehicle's 2" front trailer hitch receiver


Specs:

  • Application: 2" x 2" hitch receivers
    • Cannot be used with hitches or receiver adapters that have built-in drops
  • Blade dimensions: 82" wide x 19" tall
  • 3 Blade angles:
    • Left 45 degrees
    • Straight ahead
    • Right 45 degrees
  • Distance from center of hitch pin hole to the front edge of plow: 50"
  • Winch lift capacity: 3,000 lbs
  • Weight: 265 lbs
  • 1-Year limited warranty


Detail K2 Plow Length

The Detail K2 snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled electric winch. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.


Simple, Hitch-Mounted Installation

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.


Detail K2 Hitch Mount

To install the snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.


Detail K2 Caster Wheel

The snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.


How to Plow

Detail K2 Adjustable Plow Position

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.


Detail K2 Wireless Remote 2.4Ghz

The plow comes with a wireless remote that allows you to stay warm and out of the elements while still effectively controlling the plow. The remote operates on a 2.4 GHz frequency, allowing it to quickly send signals to the winch without experiencing delays. And because it's wireless, you won't have to run wires through your dash. Nor will you have to leave your window cracked open in the middle of a snow storm just so that you can run a wired remote into your cab. You will be glad to have it on those cold winter days.


To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.


When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.


Easy Lifting with Electric Winch

Detail K2 Electric Winch

The electric winch on this plow allows you to easily lift and lower the blade using the wireless remote control. If you prefer, you can also install the included in-cab toggle switch to control the plow. The winch uses a durable strap, which is much quieter than a chain, to raise and lower the plow.


Detail K2 Features

Detail K2 Skid Shoes

The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.


Detail K2 Blade Stiffener

Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.


Detail K2 Trip Springs

Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.



AVAL8219 Detail K2 Hitch Mount Snow Plow - 82" Wide x 19" Tall Blade

Item # K2AVAL8219



Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 31367

Easily attach a variety of accessories to the front of your Toyota FJ Cruiser with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 350 lbs
  • Gross trailer weight: 3,500 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31367 Curt Front-Mount Trailer Hitch Receiver





Customer Reviews

Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall - K2AVAL8219

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31367

Average Customer Rating:  4.7 out of 5 stars   (73 Customer Reviews)

Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: John09/03/2022

A good install! A bit of trimming for my application , but the bolt holes lined up perfectly. This front hitch was not specifically for a Lexus GX 460 but I decided to try it. There is a small area of lower bumper plastic that had to be trimmed. The hitch was pushing up against it before it was high enough to be in place. Upon trimming that area, it went in perfectly. If trimming the lower plastic is not for you, probably best to pass. However for my use, it works well. It is a stout piece, very strong. I added a pic with a red line to show where the trim needs to be.

John

9/4/2023

Works very well. I use it for mounting bikes in front, mounting a removable winch, and a front basket when I am camping. I had to add a 12 inch extension, the hitch is tucked under quite a bit. This is a very stout set up. No worries for any use.



by: Ray01/02/2023

Great easy plow to use. The hardware that came in was missing a couple nuts and bolts. Had to run to the hardware store a couple times to get the proper bolts and nuts. The plow doesn't come assembled. So expect a good evening to build this unit. First two years was great and the scraping was good. Back dragging slacks but again a lot of plows do that. So it's not terrible but does enough. Just leaves 1/4 of snow behind. But pushing snow forward works and scrapes nice on asphalt or concrete. The battery that came with the kit for the wireless controller didn't last 1 month. So be prepared to upgrade that. But it's been now on my 3rd year, one of the springs failed on it and currently searching for the replacement. The plow itself has a one year warranty so of course it's past due now. Overall it works and it's nice. Wish I had bought the power left and right but the manual lever works too. Also the side markers prematurely failed too so I had to buy meyer yellow ones from fleet farm. Cost another $xx. But I will update this as time goes.



by: Daniel12/20/2022

It has been working very well as we have actually had a decent amount of snow so far this year. took a little longer than I thought it would to assemble and mount it but after it was on it works great and looks good.



by: John12/16/2023
Lexus

Installed on my 2012 Lexus GX460. Perfect fit once I cut the center section of the lower plastic area for it to fit. Also had to trim the bottom splash guard and bend in the L brackets that hold it on. Took me about 2 hours. Very happy with the outcome. Now can mount snow blade for the driveway clearing…or any other hitch items.



by: Aaron01/23/2021

The DK2 plow and hitch are awesome! As always, the communication from Etrailer from order to delivery is top-notch. Assembling the plow and mounting the hitch was easy. Took about 4 hours with me enjoying a few beers and taking my time one evening after work. Took on wiring the next day. I like a clean finish, so this part took me about 2 hours. I placed the control module on the fuse block as suggested (etrailer's videos are a BIG help). I placed the remote transmitter on the drivers side. I ran the plow lead down to the hitch from inside the vehicle. There is just enough wiring supplied and this allows me to tuck the connector inside the hitch when not in use. A hitch cover protects it from the elements. First use was 30" of snowfall! I plowed for about 3 hours straight. The engine compartment did get warm which made the control wiring warm and pliable; so the connector came out of the control module mid way through plowing. I used some dielectric grease and it stayed connected the remainder of my plowing. It takes some practice to hitch up to the plow easily. This set up took a beating first time out. Sure glad I ordered it!!



by: Henry01/15/2024
2010 GMC Terrain

I had great personnel service, and the Hitch Receiver is solid. The material is heavy duty, and the welds are first class. Second item I've bought from etraier and both time I have been 100 percent satisfied. I go offroad and I use the hitch to hold a 2nd spare tire. I just got back from a 1,500-mile road trip to the Naveda mountains, in rough terrain, in 7-degree weather and many feet of snow and it held perfect. American made is the only way to go when your life depends on it.



by: Curtis02/16/2023
2009 Toyota 4Runner

Fit perfectly on my 08 Lexus GX470. Super excited for the additional functionality of having a front hitch. I move trails around my tight yard but also will enjoy putting a cooler on the front cargo rack, and having my hitch mounted winch up front. So versatile.



by: David08/07/2020
2007 Toyota 4Runner

Okay, first things first. I installed this hitch on a 2006 4Runner, even though the hitch wasn't specifically for that model year (Curt says the hitch fits 2007-09 4Runners). The 2006 4Runner's front tow hooks are angled down, which is a requirement for this hitch to fit (see the picture). One snag I ran into was that the four bolt holes along the top of the hitch didn't quite line up with the bolts on my 4Runner (the holes were not quite far enough apart) so I took the hitch to a machinist who elongated the holes for me. I don't know if this mismatch was a manufacturing defect in the hitch, or whether it was due to the difference between a 2006 4Runner and the 2007-09 models. Once I fixed the hole spacing, the hitch installed fine. Seems like a solid hitch. Planning to use it to push a trailer around when parking it.

David

8/8/2021

This thing is great! Its so much easier to push a trailer around using a front hitch than it is to back it with the rear hitch. I can push this thing up a long curvy driveway with no trouble. Definitely recommended.



by: Bruce08/30/2016
2008 Toyota 4Runner

I installed this on my 2008 Toyota 4runner in order to back my pop up camper down an inclined very tight drive. It was difficult to use the rear hitch because I did not have enough room to straighten out the 4runner. I did it with the front hitch on the first try! My wife says it saved our marriage! Putting the camper away was the most stressful part of the trip before this. I did need to buy a longer ball hitch of a different height because the front hitch sits lower and further under the bumper. Etrailer quickly shipped exactly what I ordered

Bruce

9/4/2017

I just used it again today, and it is still working great. Glad I got it.



by: Rich12/31/2020
2007 ToyotaFJ Cruiser

Great Fitting Hitch for the front of my FJ Cruiser. I needed a solution to re-use a personal plow from another vehicle. Luckily, the plow was able to be converted to a 2" receiver hookup. Using my existing winch for the up/down with a snatch block. Even with aftermarket Warrior Bumper and Skid Plates fit perfectly. Ground clearance not compromised. 6 bolt installation, EASY PEEZY.



by: Jeffrey Rhodes09/15/2022

I love my new front hitch. Shipped ahead of time and easy to install. Works great when moving the boat into the garage.



by: Brad11/07/2022

Overall, I was satisfied. Instructions could be more complete, and it was missing a few bolts and nuts. But Looks like a solid plow for the application I need.



by: Kimber11/15/2022
1993 Chevrolet Suburban

The plow works very well. It's not real heavy duty but it has been adequate so far. It went together quite easily and is fairly light and maneuverable when I take it off for the summer. I am glad it has the extra turnbuckle braces beside the receiver to stiffen it up. I almost wish I had gotten a wider plow. When I have it set for straight forward it is good but when I have it angled it is a bit narrow for my Suburban. One minor problem I had was when I hit a hard object and the plow snapped forward and down both of the little red plastic end markers that stick up broke off. Long exposure must weaken the plastic.



by: GJM12/27/2011
2011 ToyotaFJ Cruiser

Fast and reliable shipping. Quality product and easy install.
*Plastic front piece on bumper bends ever so slightly for tow hitch to fit.



by: Scott02/09/2022

Well worth the money! No longer having to worry about someone else coming to plow is a God send!!!



by: Edmund G.04/03/2012
2010 ToyotaFJ Cruiser

I have attached pictures of the Fj with the front tow.



by: Dave Rust09/28/2015
2010 ToyotaFJ Cruiser

The front mount Toyota FJ Cruiser hitch fit perfectly. It took me 30-45 minutes to install. you need a 145mm socket or wrench and a larger socket for the bolts that come with the kit (I used an adjustable). Good clean install using a total of 6 bolts (4 existing and 2 new that bolt to the factory tow points.

Excellent Kit!!! very happy!

Dave R.

9/29/2016

The front hitch works great! I should have bought this sooner!



by: Sid H.09/10/2013
2007 ToyotaFJ Cruiser

What a value!! I installed this front receiver hitch on my 2007 FJ Cruiser and is was a perfect fit. I planned to use it for a bicycle rack mount when pulling my boat but use it also for a winch mount, access step for under the hood and for trailer handling in tight spaces. Super fast shipping from etrailer.com and great price too!!

Thanks, et!!

Ed

9/30/2013

were you able to keep the grey front skid plate with the front receiver installed. ive been researching but cant get a definite answer. the vid for install doesnt have it on.



by: William 10/04/2023
ToyotaFJ Cruiser

I think this unit will work very nicely for being able to run my winch from either the front or the rear of my FJ Cruiser.



by: Alexander08/15/2018
2007 ToyotaFJ Cruiser

Because of my complicated parking configuration I required a front mount hitch. The product came quickly right to my door. Installation on my 2007 Fj Cruiser was so simple and took no more then 30 minutes.
Thanks!

Alexander J.

8/15/2019

Still doing its job of parking the trailer!



by: Daniel08/19/2023

Good for the price, really needs to be able to be able to angle from the cab of the truck. (deluxe model.)



by: Dan 10/02/2023
2010 ToyotaFJ Cruiser

Great product!



by: CHRIS06/10/2019

I bought this for the front of my 4-Runner to carry a bike rack. I have not used it to tow a boat or trailer, For my use it is excellent.

Chrisg.

6/11/2020

Great - love it



by: Greg R.12/24/2020

Fit my 2006 4Runner perfectly. Some have had issues installing this hitch on a 2006 4Runner here in the reviews. I purchased this 31367 hitch in February 2019, but did not get around to installing it until today, December 2020. The installation was quick and simple. Removed four nuts connecting the bumper to the frame (but four bolts remain so the bumper stays intact) by using a couple drops of Liquid Wrench (like WD40, but more aggressive penetration) on each to help loosen them with the 1/2" drive breaker bar (about 16" long) and 14mm socket. Then lifted the hitch in place to hang on the bolts and placed the nuts on snug but not tight. The hitch comes with two 24mm bolts that then go through front hitch plates, front vehicle tow hooks, and have a heavy duty rectangular 'washer' used on the under side of the tow hook to bolt the front hitch to the tow hooks. These vehicle tow hooks must be angled down at 45degrees (straight out about 1/2" then down at 45degrees) to match the front hitch mounting plate which is also at 45degrees. As shown, the front hitch has replacement tow hooks welded to it, so you still have hooks after mounting. I then tightened the two 24mm bolts and then the four 14mm bolts. Done in about 45 minutes from box open to box in the recycle bin.



by: mike w.03/23/2015
2014 ToyotaFJ Cruiser

For 2014 fj cruiser; will not fit until you cut-off the two inside lower mount bolts that do not attatch the front bumper brackets at the end or front of the frame. Not sure why these bolts are there, but may be by Toyota for some other option. Haad to cut-off then grind the remaining remnant f the stud before installation could proceed.

J W.

3/29/2015

Did you use hack saw or some easier method of cutting off bolts. Did you find what use these bolts were mounted for.


25
73
Show More Reviews

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?


  • Recommended Snowplow to Use on a 2016 Chevrolet Silverado 1500 for a Personal Driveway
  • For your 2016 Chevrolet Silverado 1500, I recommend using the Detail K2 Avalanche Snowplow part # K2AVAL8219 with the Curt Front Mount Trailer Hitch Receiver part # C31069 in order to plow your 800' long lane. The Avalanche Snowplow is 82" wide x 19" tall. It has an electric winch so you can make all of your adjustments in-cab, adjustable blade for precision plowing, and a rubber deflector on top which diverts snow away from your windshield. The other thing I like about this plow is that
    view full answer...

  • Hitch and Hitch-Mount Snow Plow for 2010 Volkswagen Tiguan
  • The Detail K2 Avalanche Snowplow for 2-Inch Hitches # K2AVAL8219 is intended to install into a 2-inch hitch receiver. In most cases a plow will be used on a front-mounted hitch but a rear-mounted hitch can also be used. Rear-mounted 2-inch hitches are offered for your 2010 Volkswagen Tiguan, such as etrailer hitch # e98906, which is the one I recommend. This hitch installs without drilling but does require a bit of fascia trimming. All required hardware is included with the hitch.
    view full answer...

  • Available Front-Mount Hitch Receiver for 2007 Ford Explorer Sport Trac
  • Only a front-mounted aftermarket hitch is offered for your 2007 Ford Explorer Sport Trac. This comes from Curt, part # 31545. This hitch has a 500-lb vertical load rating, making it a great way to add a snowplow like the hitch-mount Detail K2 # K2AVAL8219. All aftermarket accessory items for your vehicle are shown on the linked page.
    view full answer...

  • Difference in Detail K2 Snowplow for 2" Hitches and the Detail K2 Elite Snowplow
  • The Detail K2 Elite Snowplow for 2" Hitch, # K2AVAL8219ELT on your 2017 Nissan Frontier uses an electric actuator raise and lower the plow whereas the Detail K2, # K2AVAL8219 uses an electric winch. The Detail K2 Elite Snowplow, # K2AVAL8219ELT has an internal clutch that prevents damage caused by overextension of the actuator. It also uses a chain instead of a strap on the other model. For a front mounted hitch on your 2017 Nissan Frontier, I suggest the Draw-Tite Front Mount Trailer
    view full answer...

  • Detail K2 Avalanche Snowplow For 2004 Chevy Avalanche 1500
  • I contacted Detail K2 snow plows and they have successfully mounted their plows on the 2004 Avalanche 1500. I recommend Detail K2 Avalanche Snowplow for 2" Hitches part # K2AVAL8219 and curt front mount hitch part # 31302. They do not have any notes stating any issues with the fit on a 1500.
    view full answer...

  • Snow Plow Recommendation for 2019 Jeep Wrangler
  • We have just what you'd need to install a plow on your 2019 Jeep Wrangler for the plow I recommend the Detail K2 Avalanche part # K2AVAL8219 which is 82 by 19 inches in size and comes with a winch setup to make raising and lowering the plow very easily from inside your vehicle. It has 3 blade angles it can be set at and comes with a wireless remote too. To mount it on your vehicle the front hitch part # C31086 is a custom fit for your vehicle and is the hitch that Detail recommends
    view full answer...

  • Parts Needed To Mount Detail K2 Snowplow # K2AVAL8219 On Front of 2020 Nissan Frontier
  • The Detail K2 Snowplow for 2" Hitches # K2AVAL8219 does not include the Curt Front Mount Trailer Hitch Receiver # 31241 that is needed for your 2020 Nissan Frontier. The plow will come with all the wiring needed for the winch on the plow. I recommend adding the Timbren Front Suspension Enhancement System # TFXF1004A as it is specifically designed to help support the front suspension when using a plow. This will help reduce the amount of front end sag when carrying the plow.
    view full answer...

  • Compatibility of Hitch-Mount Snow Plow on 2013 Ford F-150
  • We offer a range of 2-inch hitch-mount snow plows that can work on your 2013 or 2014 model year Ford F-150 so long as it has a front-mounted 2-inch hitch receiver. I know of no particular issues with using a snow plow on the later model F-150s. If you need a front hitch for your truck you can use the link at right to select a 2-inch hitch. Since you did not specify whether you have a 2013 or 2014 I have included two links, one for each model year, that you can use to select your truck
    view full answer...

  • Can you Install a Snowplow on a 2017 Ram 1500 4x4 with Electronic Steering Assist
  • I spoke with all of the snowplow manufacturers we carry and none of them have ever heard of or had any issues with installing a snowplow on a 2017 Ram 1500 4x4. I would call the dealer to see if they say otherwise but I would not consider the statement to be true as all of the manufacturers state they have sold snowplows for this vehicle and have not heard back about the problem you described. For your Ram, I recommend using the Detail K2 Avalanche Snowplow part # K2AVAL8219 which installs
    view full answer...

  • Will This Detail K2 Snow Plow Fit A 2016 F150 With A 4 Lift & 35" Tires?
  • The Detail K2 Snowplow # K2AVAL8219 will fir your 2020 GMC Sierra 1500 even with the big 35" tires and lift. The potential issue is functionality. A plow attaches to your frame, which is now separated from your suspension by another 4 inches and then there's the distance to the ground depending on what size tires you're running. Using 35's will just make the distance even greater. That's where you'll see your plow not pushing properly. The plow needs to transfer and distribute loads back
    view full answer...

  • Detail K2 Snowplow for 2001 Dodge Ram 1500 Sport
  • All snowplow kits offered for the 2001 Dodge Ram 1500, shown on the linked page, exclude the Sport version from their fits. My technical contact at K2 advised that instead of a front-mount hitch you CAN use their Custom Mounting Bracket kit # K284309. This has no known compatibility issues with the Ram Sport according to my contact. With it you can use a plow like # K2RAMP8219.
    view full answer...

  • Snow Plow And Hitch For A 2017 Ram 1500 Rebel 4x4
  • The Detail K2 Snowplow for 2" Hitches # K2AVAL8219 and the Curt Front Mount Trailer Hitch Receiver # 31374 will work for your 2017 Ram 1500 Rebel 4x4. The Draw-Tite # 65062 has a line load capacity of 9,000lbs, and vertical load limit of 500lbs.
    view full answer...

  • Can I Plow Wet And Heavy Snow With The Detail K2 Snowplow For Residential Areas
  • I did some research and I got the following information. You will have to be careful plowing wet and heavy snow with the Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall, part # K2AVAL8219. According to K2, "Your K2 snowplow is not intended to clear the snow deposits created by large municipal or commercial snowplows, which contain heavy compacted, frozen lumps of snow and ice, and could damage the plow and vehicle.
    view full answer...

  • Will Agri-Cover SnowSport Front Mount Hitch Work With Snowplows on 1994 Jeep Wrangler YJ?
  • The Agri-Cover SnowSport Front Mount Hitch A40163 for your 1994 Jeep YJ can work with some K2 plows, the Detail K2 Avalanche Snowplow # K2AVAL8422 which is 84" wide x 22" tall and weighs 283 lbs as well as the Detail K2 Avalanche # K2AVAL8219 which is 82" wide x 19" tall and weighs 265 lbs. The Agri-Cover hitch will work with those K2 plows though it is designed to work with Agri-Cover SnowSport HD plows A40000HD which is 84" wide x 18" tall and weighs 114 lbs, A40040HD which is 96"
    view full answer...

  • Does Skid Plate of 2014 Toyota FJ Cruiser Have to Come off to Install Curt Front Hitch
  • Thank you for the picture of the skid plate you have installed on your 2014 Toyota FJ Cruiser. Based on that I can tell it's going to have to come off to install the Curt front hitch part # 31367 that you referenced. I also attached a picture of this hitch installed and you can see that the hitch sits right where the skid plate goes.
    view full answer...

  • Front Mount Receiver Mounting Hole Spacing for Curt Hitch 31367
  • It sounds like you might want to use Curt front mount hitch # 31367 on a vehicle it was not designed for. Please note that doing so will void the hitch warranty and can also require major modifications done to the vehicle to get it to fit. This hitch is designed for the 2007 to 2009 Toyota 4Runner, 2007 to 2014 Toyota FJ Cruiser, and 2010 to 2013 Toyota 4Runner Trail Edition only. It will not fit any other vehicles. The outer holes measures 36.13 inches apart on center. The inner set
    view full answer...

  • Will Front Mount Trailer Hitch, # 31367, Fit a 2008 Toyota FJ Cruiser with Trail Team Package
  • I spoke with my contact at Curt on whether or not the Front Mount Trailer Hitch Receiver, # 31367, can be installed on your 2008 Toyota FJ Cruiser with the grille guard in place. While he did not have any notes stated that it would not fit the Trail Team package models, he could not say for sure that it would fit. I have included a link to the instructions below. Take a look at the mounting points for the hitch and then where the grille guard is mounted on your FJ Cruiser. If they use
    view full answer...

  • Will Curt Front Hitch Receiver Fit a 2013 Toyota FJ Cruiser with Expedition One WyoOtto Bumper
  • The front mount hitches we carry for your 2013 Toyota FJ Cruiser including # 31367 are designed to fit stock vehicles. But looking at pictures of the Expedition One WyoOtto bumper versus the stock bumper it does not appear that the new bumper hangs down any lower than the stock bumper. Provided that the new bumper uses the same mounting locations as the stock bumper and none extra needed by the hitch (see linked instructions) then I am confident it will fit. I have linked a video showing
    view full answer...

  • Front Hitch Recommendation for 2007 Toyota 4Runner
  • For your 2007 Toyota 4Runner we have one front mount hitch, the Curt part # 31367 which is a confirmed fit. We can't recommend trying to install any other hitch on the front of your vehicle. With a bike rack mounted to the front of the vehicle normally it's not an issue but you have to consider that it might block headlights and turn signals depending on the style of bike and how "see-through" it might be.
    view full answer...

  • Can the Loops on a Front Mount Hitch be Used for Vehicle Recovery
  • Yes, the front loops on the Curt Front Mount Trailer Hitch Receiver part # 31367 can be used for vehicle recovery up to 9,000 lbs. In fact, this is actually what they are designed for. This hitch will be a direct fit for your 2014 Toyota FJ Cruiser and will not require any drilling. If you ever need to pull yourself out you can also attach a winch like the ComeUp Cub Winch w/ Mounting Plate for 2" Hitches part # CU123933. I have attached a photo of the finished product for you as well.
    view full answer...

  • Can Dirt Bike Carrier be Mounted to Front Hitch on Toyota FJ Cruiser
  • Yes, you can absolutely mount a dirt bike carrier such as the Ultra-Fab # UF48-979033 or etrailer # e98873 to the Curt Front Mount Trailer Hitch Receiver # 31367. I can verify as well that this hitch is a fit for the 2007 - 2014 Toyota FJ Cruiser. In regards to legality you will want to check your local laws.
    view full answer...

  • Recommended Front Mount Hitch And Bike Rack For 2010 Toyota FJ Cruiser With Backup Camera
  • With the backup camera mounted in the middle of the spare tire hub on your 2010 Toyota FJ Cruiser, it will be impossible to find a spare tire mounted bike carrier that would not interfere with the camera. Installing a rear hitch on your Cruiser and installing a bike rack would block the camera as well. My only recommendation would be to install a front mount hitch like part # 31367, on your Cruiser. You could then use a bike rack on the front of your vehicle. This hitch has a 350 lb
    view full answer...

  • Front Hitch And Spare Tire Carrier For A 2010 Toyota Fj Cruiser
  • Yes, the Curt Front Mount Hitch # 31367 will indeed fit a 2012 Toyota FJ Cruiser. It has a 350 lb vertical load limit so it can certainly be used for a spare tire mount. A really good option for a carrier is our etrailer Hitch Mounted Spare Tire Carrier # e98ZR. It has a universal bolt pattern design so it will accommodate virtually any wheel/tire combination.
    view full answer...

  • Troubleshooting Installation of 2008 FJ Cruiser Front Mounted Hitch
  • With factory bolts, there is often thread locker or binding from time and debris. I recommend using a penetrating oil lubricant to work into the threading to allow you to loosen the nut. I recommend spraying the oil all the way around the nut only where it makes contact with the bolt and then using a wrench and mallet to add vibration to that nut. The vibration will help the oil get inside and loosen the hold. You may need to use a breaker bar to get the torque needed to loosen the
    view full answer...

  • Is It Possible The Curt Front Hitch 31367 Could Fit 4Runner Models Prior To 2007?
  • Hey Trenton thanks for the question. You are correct that the Curt Front Mount Trailer Hitch # 31367 technically is not a confirmed fit for the 2003 Toyota 4Runner. Per the manufacturer it is only made for 2007-2009 models. That being said, we have had several of our customers report back to us and say that the # 31367 hitch can be made to fit model years prior to 2007. I have included a few screenshots of some customer reviews below. It sounds like in both cases the hitch was successfully
    view full answer...

  • Will a Curt Front Mount Trailer Hitch Work with a Warn Multi Mount Kit On a 2008 Toyota FJ Cruiser
  • The Curt Front Hitch for the 2008 FJ Cruiser , item # 31367, and the setup you are describing should work well, as long as the multi mount you are referring to is designed to fit into a 2 inch receiver. If you already have the winch but not the hitch mount, the Bulldog Hitch Mounted Winch Mounting Plate with Handles, item # BDW20011, will work with the mounting pattern of the Warn winch also.
    view full answer...

  • Will the Curt Front Mounted Hitch 31367 for a 4Runner and FJ Cruiser Fit on a 2022 Lexus GX460?
  • The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" item # 31367 is a confirmed fit for a 2007 to 2009 Toyota 4Runner, 2007 to 2014 Toyota FJ Cruiser, and 2010 to 2013 Toyota 4Runner Trail Edition only. It was not designed to fit any other vehicles therefore I can not say whether or not it will fit a 2022 Lexus GX460. Just a heads up that attaching this hitch to a vehicle it's not designed for will void the hitch warranty and can also require major modifications done to your Lexus
    view full answer...

  • Steel Thickness of Curt Front Mount Receiver Hitch # 31367
  • I went out to our warehouse and measured the thickness of the steel on the Curt Front Mount Hitch Receiver # 31367 with a digital caliper. The steel on the crosstube measured 0.255 inch thick and the steel on the mounting brackets are 0.342 inch thick. The tow hooks themselves have a 1/2 inch diameter. I have attached an image to assit. I have not heard of a customer modifying this particular hitch so that it fits your 2003 Toyota 4Runner so I am not sure what that process would
    view full answer...

  • Is There a Front Mount Trailer Hitch Receiver Available For a 2019 Lexus GX 460?
  • As there is not a custom fit front receiver for your 2019 Lexus GX 460 you will need to have a receiver fabricated. The Curt Weld-On 2" Receiver # E17 is a great starting point for having a custom receiver fabricated. The Curt Receiver # 31367 fits a 2007 - 2009 Toyota 4Runner, 2010 - 2013 Toyota 4Runner Trail Edition and a 2007 - 2014 Toyota FJ Cruiser. These are on different chassis than your Lexus which is on a chassis closer to a Sequoia which there is also not a front receiver available
    view full answer...

  • Does Install of Curt Front Hitch # 31367 on 2014 Toyota FJ Cruiser Require Cutting of Bolts
  • Several years ago we did have one customer who reported that they had to cut bolts for the Curt front hitch part # 31367 to fit their 2014 Toyota FJ Cruiser but we haven't had any other customers report the same thing so I would not anticipate it being a requirement for you as well.
    view full answer...

  • Correct Front Mount Hitch for 2016 Toyota 4Runner SR5
  • The Curt # 31367 front mounted hitch fit 2007-2014 Toyota 4Runner Tail Edition models. For the 2016 SR5 model, you'll want to use part # C31076.
    view full answer...

  • Front Hitch Availability for 2014 Toyota RAV4
  • First, thank you for your recent purchase of a rear trailer hitch for your 2014 Toyota RAV4. Thank you also for providing a photo of your vehicle showing its bull bar and off-road lights. The front-mount hitch receiver you referenced, Curt # 31367, is a fit for various model years and versions of the 4Runner and FJ Cruiser, but not for your RAV4. We do not offer any front hitches for your 2014 RAV4, nor for the earlier model years that I also checked. Since you have a bull bar and
    view full answer...

  • How to Determine if a Curt Front Hitch Be Installed with a Bull Bar on a 2007 Toyota FJ Cruiser
  • In most situations front hitches and bull bars aren't compatible together on a vehicle like your 2007 Toyota FJ Cruiser because they use the same installation points and occupy the same area for the most part. Since the front hitch # 31367 hasn't been tested with a bull bar I can't say for certain if it would fit or not. The best recommendation I can make would be to check out the install video and instructions I attached so that you can decide if they two could be both installed at
    view full answer...

Info for these parts were:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Andrew K
Video Edited:
Andrew K
Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Toyota FJ Cruiser Accessories