Part Numbers: TLD2140,TLD3113
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (1753 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.One side fit perfect. Other side strait out of the box had a huge booger weld on the back that made it not fit. Ground the boogers off so it would sit flush and then the bolt holes don't line up. Never mind that the website said free delivery in 3 days when I placed the order. Next morning shipping pushed another day. Then the next push another day. Ended up taking 8 days for them to arrive. When I called about it no replacement brackets available for 3 weeks.
Easy install and just a great product. Install took 90 minutes for front and rear mounts.
Instruction regarding removing brake cable were not real helpful. The e brake adjustment bolt that the instructions say to loosen is in a bracket that does not allow you to get a wrench on it, you need a 1/2” socket that’s about 4” deep. I ended up putting a socket over it and then turned it with vise grips( not ideal). The instructions also say to pry open the tabs on the e brake coupler
but nothing needed done with tabs I had to get a small punch and drive the loose end of the cable out of the coupler as it’s extremely tight in the coupler.
After finally getting the e brake cables out of the way the rest of the install went ok. I’m a bit disappointed in the fit as the Tie down inserts come into contact with the very end of the truck running boards and have to be tapped in scuffing the end cap on the factory running boards. A little fine tuning needs to be done to make these everything they say they are. 2022 Ram 2500
These are a must with a slide in. I would not do it any other way. This with a set of fastguns and you're all set.
Easy to install and rock solid once they’re in.
The only thing that slowed me down was the e-brake cable disassembly, otherwise both sides would have been installed in under 30 minutes.
These do look to be of good quality and finish. That said, the packaging it was shipped had almost no paper to hold the items in place so the black finish had many large gouges in it. Then when installed the middle bolt snapped off inside the frame of my truck while torquing to 75lbs. I was using a torque wrench set at 75lbs. After finishing the installation I check fit and clearance. These were supposed to work with my truck configuration according to etrailer website, however they do clear the factory running boards.
These with a set of fastguns and you're all set.
We have ordered quite a few items from etrailer and they always come through with quick delivery and quality products!
The torklift tie down system is a must. I’ve had them on my GMC Denali the make loading and securing my lance camper a breeze. I just ordered a new set because I recently purchased a new ram truck and the old bracket wouldn’t fit. Not sure how it could be done with out your products.
These were easy to install, a bit challenging on drivers side due to e-brake cable, but very straight forward. My only complaint is there was quite a few large scratches. Great product!!
We previously bought a truck camper and older truck with tie downs. A year ago we decided to upgrade to a new truck which of course meant buying and installing new TorkLift tiedowns. After some hand wringing I made the appropriate purchase and took the next step of installing them. I did feel reassured that the product was set up for our specific truck. Although I do some work on the camper and all I am not a mechanic so I will say this product was a cinch to install.
I verify that TLD2140 fits the 2024 Ram 3500 Crew Cab 8 ft Bed. It involves some patience and an extra person helping is almost a must have. The directions were very well written. Take your time and have patience when removing the parking brake cables. Yes, you must have a torque wrench.
Torklift makes a very high quality product. Extremely strong construction.
I installed these on my 2022 Ram 3500 SRW over a year ago for use with a Northern Lite 9-6 camper. Excellent instructions, installation was easy with simple tools, fit and finish is very good and they perform exactly as required. Definitely recommend!
Very disappointed with the delivery company.They left my delivery on a busy street behind our mail box,any one else that delivers Always brings it back to our house.Anything of importance is always brought to our house or we have PO Boxes that mail goes to.
This fit perfect for amp research power running boards. Amy h was awesome in making it happen. Will definitely use this company again.
Very fast efficient delivery. well thought out design. easily installed by an amateur. Following the very precise instructions if you don’t mind laying on your back and looking up hill for about an hour!
Fit was excellent and easy to install
Delivered quickly and product was as stated in description.
(this is, verbatim, the same review I gave for the front set of tie-downs)
I wasn't planning on purchasing a new set of Tie-Downs, but having my truck totaled by a careless driver, changed that plan.
Bought the front and rears to install on my new 2021 Ram 2500. Installation was a snap, literally under an hour for the set of four. Using them to secure my Lance 650, they have worked as excellently as the previous set did (may they rest in peace).
as usual, etrailer's sales and service were top shelf.
I wasn't planning on purchasing a new set of Tie-Downs, but having my truck totaled by a careless driver, changed that plan.
Bought the front and rears to install on my new 2021 Ram 2500. Installation was a snap, literally under an hour for the set of four. Using them to secure my Lance 650, they have worked as excellently as the previous set did (may they rest in peace).
as usual, etrailer's sales and service were top shelf.
Couldn’t camp without this product. Absolutely fits perfect and easy to install. Thank you etrailer!!
Product seems decent quality. When received, some of the powder coat was flaking off which doesn’t bother me because it’s under the truck and going to get dirty anyways. Also, the figment was not that great, when installing the front mounts on my 2020 ram, they do not fit that great and didn’t not sit flush on the frame. In order to get them to sit flush, I had to tighten the top two bolts a little, then tighten the bottoms two that attach to the sandwich plate on the frame side to suck the mount in towards the frame. Then I tightened down the top two bolts the rest of the way which pulled the tabs up and kind of bent it into place.
I really like the way the truck and camper ride, very stable. The ability to remove the extensions when the camper is off is really a nice feature too.
Product is great,,,,instructions suck. How much trouble would it be to do a couple more illustrations.
Your hardware instructions were fine,,,,,Just the re-routing emergency brake cable was beyond bad.
(perhaps a video?)
Ask the Experts about this Truck Camper Tie Downs
Do you have a question about this Truck Camper Tie Downs?
TorkLift Accessories
Fit to this rack on your 2022 Ram 2500
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.