Will The TorkLift Camper Tie Downs Fit a 2022 Ram 2500 6-1/2' Bed With Amp Bed Step?

Question

Question:

So the description says it will not fit with the Mopar bumper step. Will it fit with the AMP bed step? This is on a 2022 ram 2500 6’4” bed, with amp power steps and bed step

asked by: Todd V

0

Expert Reply:

The Rear # TLD3113 TorkLift Camper Tie-Downs are not compatible with the AMP Research Bed Step on your 2022 Ram 2500. These parts both mount in the same location on your Ram, but you can swap them out since you will not need the step when you have the slide in camper in the bed. You will also need the Front # TLD2140 Tie-Downs and TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK to secure the slide in camper in your 6'4" bed.

expert reply by: Bud M

0

Answer 1

Hi Joe, Yep, you heard correct, you can go from a 2 inch shank to a 2-1/2 inch shank with your Reese weight distribution hitch without issue. One of the following 2-1/2 inch shanks should have the right rise/drop for your application. Here are the…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 3

The Head Unit and R16 Roller Adapter #C16515 is more of an entry level fifth wheel head designed for a lower price point, whereas the A16 part #C16520 is a bit nicer with it's 2 piece jaw system that will provide better king pin contact…

view full answer...

Answer 4

No, they will not but I have a custom fit set that does. They are the Curt item #C16427-204. This set of rails is industry standard so they will work great with your Curt Q20 Slider. The brackets are custom fit and install in pre-existing holes in…

view full answer...

Answer 5

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

None of the options for the prep package are specifically designed to add height. Depending on the ball you have now you might be able to get a little more height out of the B&W Ball and Safety Chain Kit #BWGNXA2061. The installed height of this…

view full answer...

Answer 10

Thanks for the pictures and information! I just heard back from my contact at Lippert and your 2024 Keystone Cougar has a 1621 pinbox. You will need the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY58GR you were looking at. You will also need…

view full answer...

Answer 11

Whether or not your pin box will come into contact with your tailgate is going to depend on a few different factors. Depending on how high you have the hitch head of the B&W Companion OEM 5th Wheel Trailer Hitch w/ Slider #BWRVK3670 in the bed of…

view full answer...

Answer 12

Thank you for the photo of your 2016 Ram 3500's bed rail which sits 59-inches above ground. You are correct that the recommended minimum clearance between a bed rail and the underside of the trailer's overhang is 5 to 6-inches, as shown in…

view full answer...

Will The TorkLift Camper Tie Downs Fit a 2022 Ram 2500 6-1/2' Bed With Amp Bed Step?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching