Detail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: K2AVAL8219ELT,C31078
Our Price: $2,395.55
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meDetail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall
part number: K2AVAL8219ELT
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.
Features:
- Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Electric actuator raises and lowers plow smoothly and consistently
- Wireless remote control lets you operate plow from the warmth of your cab
- Internal clutch prevents damage caused by overextension of actuator
- Simple, chain-lifting design has fewer moving parts than other plow-lifting devices for a longer-lasting system
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top of plow directs snow down and away from your windshield
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
Specs:
- Application: 2" x 2" hitch receivers
- Cannot be used with hitches or receiver adapters that have built-in drops
- Blade dimensions: 82" wide x 19" tall
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- Distance from center of hitch pin hole to the front edge of plow: 50"
- Weight: 265 lbs
- 1-Year limited warranty
The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Smooth, Controlled Lifting with Electric Actuator
The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.
To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.
This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.
Detail K2 Features
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
AVAL8219ELT Detail K2 Elite Hitch Mount Snow Plow - 82" Wide x 19" Tall Blade
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: C31078
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in the USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31078 Curt Front-Mount Trailer Hitch Receiver
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Detail K2 Elite Snowplow for 2" Hitches - 82" Wide x 19" Tall - K2AVAL8219ELT
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31078
Average Customer Rating: 4.8 out of 5 stars (95 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: 12teachscience08/06/2022
2022 Ford F-250 Super Duty
Do not follow the instructions for cutting the air dam. I cut mine 3" wide and 3 1/2 " tall. It was still a little wide. It goes without saying "you can always enlarge it but can't make the hole smaller." The poor instructions kept me from giving it 5 stars. I was able to put black silicon around the cut. Other than that it went on fine and seems to be sturdy. I chose the curt because it was lower and a bicycle rack would not stick up as high,
by: Rodney04/28/2024
I installed a large tool box for extra storage during an extended trip to Utah. The hitch was no problem and I minimized lateral movement by strapping the box frame to my tow hooks and it worked great. I will be installing a front motorcycle carrier in the future
by: Tim K12/08/2022
Delivery was quick, a really easy installation I did myself.
Perfect for carry rack, spare tire, winch and moving my trailer!
Tim K.
12/9/2023
Works great and when not being used its basically out of sight on the front of the truck!
Mike L.
12/9/2023
@TimK We're glad you're happy with it!
by: Joseph 05/01/2024
Love this front mount receiver hitch, great solution for mounting my winch, but will likely use it for a front mounted bike rack and other things in the future. Very heavy duty. Install was a breeze, but you do have to cut a small hole in the front apron for it to exit through. I used my multi-tool for a nice clean cut.
by: David06/22/2023
The customer service I received was great. I was in Nashville when my bike rack actually broke the welds on my fifth wheel bumper. I needed to purchase and install a front receiver for my F350. We were only staying in Nashville for 5 days so I needed the hitch shipped quickly. James R was my customer service rep. James had the hitch to me in one day. He also sent me a how to install video. The installation went well. I am 65 and was able to do the install with a little help from my floor jack.
Great experience
by: Dirk06/09/2024
As others mentioned, box was pretty beat up. But hitch was fine. I removed the air dam to give me more space. Hitch installed with the help from a floor jack to hold it in place. I cut the hole in the air dam and reinstalled it on the truck. Took about 3 hours, I added a Kuat drop receiver extension to lower and extended it to hold two Himiway e bikes
by: Tim & Gary --- two retired IT guys with a toolbox 04/28/2023
2022 Ford F-250 Super Duty
Product arrived in a damaged box (handlers) but the sturdiness of the product and proactive taping of the hardware to the receiver prevented any parts from being lost.
Installation video was helpful. Instruction from manufacturer assume you know all terminology. Installation times shown are questionable. Two retired IT engineers completed the install in approx 3.5 hours. We decided to take off air dam to have better access to the bolts holding the fascias.
Getting a torque wrench on the "joined / reused bolts" was challenging as it is a one click on the ratchet.
Super pleased with the outcome and installation we accomplished. Going to use this to haul a pair of ebikes using a Swagman Ebike contraption. :-) Will mostly likely add a 4" drop adapter to lower the bikes out of the field of view while driving.
by: Richard06/30/2019
Definitely a quality item, very satisfied with it. My truck is a 2X4 so has a smaller air foil below the bumper and it did not require cutting, there's a 1/32 to 1/16 inch gap between the two. I used some wood blocking to support it for the install and checked the paperwork and my measurements a few times thinking that I might have the wrong part because when the hitch was supported by the hardware there was about a 5/16 gap on both sides, had to draw that in by tightening each side alternately. All in all good. The hitch has the mounting holes needed for existing items that you will move to fit it in. Took me 4 hours to install including sizing the wood blocking that I used to support it. Also because I had to tighten each side a little at a time to close the gaps, tough work on the thick plate that is used to make the hitch. Extremely happy with the hitch including the access to the pin. Definitely glad I got it, definitely glad I got it here as well, on my porch in three days :)
by: Gary 05/31/2024
Easy to install, fit perfect. Only thing is that the box was ripped whrn it arrived. Luckily all the parts were taped onto the hitch bar.
by: Thomas 01/10/2023
Have installed a 10,000 lb winch in the front receiver and it is working perfectly.
Thomas P.
1/11/2024
Its just as good today as the day it was mounted,a great product
by: Steven07/28/2022
Volvo Cross Country
Carrying mountain bikes on 3 year cross country Airstream trip and this front mount system is great... no issues so far. Keep lubricated and periodically check threaded pin and life is good!
by: Larry12/07/2019
2019 Ford F-350 Super Duty
Kudos to E-Trailer for fast delivery. Due to the weight the box was beat up pretty bad, but no damage to the hitch. Quality hardware included as well as fish wires to get the hidden bolts into place. The measurements for cutting the slot in the air dam were wrong as far as I was concerned. The instructions said to cut 4 inches up and 3 1/2 inches wide. As you can see by the pictures, 4 inches up is too much. The top should be cut right where the curve at the top of the air dam cross feature is. I did install this by myself. A helper would have been a good idea. If you choose to install this solo, get the supplied bolts that hang down vertical started loosely first to carry the weight of the hitch. Then you can maneuver the hitch to line up the holes for the side bolts. Once everything is tight the hitch is very solid and except for my boo-boo with cutting the air dam, is almost invisible.
by: Morgan03/02/2024
Love the hitch took about a hours to install , I didn't rush or have help, went together easy self explanatory if you a little mechanical inclined. Look forward to mounting trap and winch in next couple days and using maybe in the next couple weeks. Thank you very well built, package was tore open in shipping not sure if can be packaged better but I not really care it a reciever it going to get beat up anyways!
by: Carlos02/20/2021
This thing is fantastic! My girlfriend and I put this thing together. It is perfect for keeping up with a storm. It is sturdy, takes a beating and keeps on going. I have a 2014 Ram ecodiesel. Would not use this plow setup for professional jobs however, only because it isn’t heavy enough to plow through mounds of snow covered ice. And when I say mounds, I mean 2 feet high and dense. Only drawback was shipping: I never received a tracking number from the shipping company but it did ship right away and was delivered in the time frame I was given. Enjoy guys!
by: Carl04/07/2024
Quick delivery, no missing parts. Went on easy after cutting the trim as in the instructions.
by: Eric 01/17/2024
2020 Ford F-250 Super Duty
Great product. I appreciate that it came with ALL of the hardware and fish wire needed to route the bolts. Well thought out.
by: JL12/11/2023
WORKS GREAT! I made a trip to Alaska and back with the attached tray holding a generator and 10 gallons of gas. No problems at all.
by: Robert06/02/2020
Nice quality product. Packaging pretty banged up but didn’t expect any damage given what it is. Kind of hard to damage steel.
No problems with installation. Two front bolts both sides a challenge to torque given limited swing on wrench.
Curt was pretty generous on trim dimensions on front air dam. I trimmed to their dimensions and have over an inch of clearance on top. Side to side is okay.
Overall quite happy with my purchase.
by: Mike 08/14/2023
Ford F-350 Super Duty
Excellent quality, perfect fit and installation went very smoothly. This is the 2nd Curt front receiver hitch I’ve purchased from etrailer. Very pleased with the ease of purchase and very fast delivery! I’ll be switching between a winch and snow plow on 2020 F350 Superduty.
by: Joel 06/18/2023
2020 Ford F-250 Super Duty
Installed the 31078-hitch on a 2020 Ford F250 4x4 diesel truck. The install was completed from the garage floor, so the fascia was removed for easier access. The truck had fascia brackets, so they had to be removed and NOT reinstalled. The 31078-hitch fit perfectly and was easy to install with a person helping hold the hitch during the bolt installation process. As everyone has stated, don’t cut the fascia as per the instructions because the hole will be too big. I was successful in cutting an opening with about a 3/8” gap along the sides and top. This hitch will be used to carry a bike rack, generator, or cargo carrier.
by: Michael 05/29/2024
I have not installed it yet.
by: David03/27/2021
Item and the fasteners are the highest quality, no import junk.
The welds, deburring, and paint are also superior.
The fit is spot on, not snug, not loose, just perfect.
It went on a 2021 F250 Tremor and no trimming was needed for the front fascia.
It hangs down to about the front steering linkage level, a perfect clearance marker.
David
4/1/2022
Excellent ! Very Strong
by: Michael03/29/2023
2022 Ford F-250 Super Duty
Have installed 2 other Curt hitches on other vehicles without problems. Was not the case with this one. Fit was super tight, requiring a hammer to knock it in place on my new F-250 that only had 900 miles on it. I called the Curt technical support department and they were of no assistance. Blamed tightness on Ford. Also be very wary of the amount of skirting trim Curt recommends in their instructions, as it is way too much. I noticed that as a problem while watching the etrailer installation video and the installer trimmed out too much. Disappointing.
by: Randy 09/10/2023
2023 Ford F-250 Super Duty
Very well made. Great hardware. Straightforward installation.
Will be hanging 2 E bikes off a Superduty. Very pleased with product. And great fast shipping. Thanks.
by: Rich04/29/2023
Arrived on time. Easy install even with a ranch hand grill guard already on the truck. Used 7” grade 8 bolts to secure thru guard frame and hitch. Used a transmission jack to raise hitch into place. Very heavy duty hitch and quality.
25
95
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Does The Front Fascia Need to Be Cut For The Support Arms On Detail K2 Snow Plow For Front Receiver?
- Chris, while you could cut out the lower valance with 2 additional openings for the Detail K2 Elite Snowplow # K2AVAL8219ELT to fit the Front Receiver # C31078 on youur 2023 Ford F-250. A better option may be to simply remove the valance when you use the plow. Then you could simply reattach the valance after you are done using the plow. There are only screws holding the valance to the bottom of the front bumper.
view full answer... - Best Snow Plow For 1999 Ford Explorer
- I recommend getting the Detail K2 Plow as they are very popular and reliable for many years of use. Both will need this front trailers hitch receiver # C31051. If your 1999 Ford Explorer is 4 wheel drive, you'll need this kit # K2AVAL8219ELT and if you have a 2 wheel drive version you'll need this one # K2AVAL8219. Both function the same.
view full answer... - How is the Blade Lifted/Lowered on the Detail K2 Avalanche Elite Snowplow for a 2002 Jeep TJ
- The Detail K2 Avalanche Elite Snowplow part # K2AVAL8219ELT has a 82" wide x 19" tall which is raised and lower via an electric motor which is attached to a set of chain links. In order to use this on a 2002 Jeep TJ you will need the Curt Front Mount Trailer Hitch Receiver part # C31028.
view full answer... - Comparing Curt and Draw-Tite Front Mount Hitch Receivers for a 2018 Ford F-250 Super Duty
- It looks like the hitch pin hole on the Curt Front Mount Trailer Hitch Receiver # C31078 will stick behind and/or below the fascia while the Draw-Tite Front Mount Trailer Hitch Receiver # 65076 will stick out far enough to easily reach the hitch pin hole.
The ultimate deciding factor is how you want it to look though. If you'd rather have more of a hidden receiver and you don't mind possibly having to reach behind the fascia to secure accessories then the Curt is the way to go, but if
view full answer... - Recommended Snow Plow for 2019 Ford F-250
- The Detail K2 snow plows have two mounting options on your 2019 Ford F-250. One is the brackets # K281530 and the other is the Curt Front Mount Trailer Hitch # C31078. I would choose the front mounted hitch since it will allow you to use other accessories or other hitch mounted snow plows in the future if you wish.
For a snow plow, it will depend on the size you want as well as how the plow is operated. If you're fine with the electric winch and nylon strap raising and lowering the plow
view full answer... - Will The Curt Front Mount Trailer Hitch Receiver Fit With Factory Winch on a 2022 Ford F-250 Tremor?
- While the Curt Front Mount Trailer Hitch Receiver # C31078 will fit with the Tremor package, the winch on your 2022 Ford F-250 does mount to the same location as the receiver. This will prevent you from bolting on the receiver with your winch. It appears the only way you will be able to add a receiver with the winch installed is by having a custom receiver fabricated. We do the the 2" Receiver # E17 which will aid in the fabrication process.
view full answer... - What Front-Mounted Hitch do You Recommend for My 2022 Ford F-350 Diesel with a Single Rear Wheel?
- For a great front-mounted hitch for your single-rear wheel 2022 Ford F-350 diesel, I recommend the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31078. This will work perfectly with the Diesel engine in your truck since you have single rear wheels, and will give you a 9,000lb line pull, 500lb vertical load, and a 5,000lb trailer weight rating making this a great overall option for multiple different uses such as carrying a bike rack or cargo carrier, or for using a ball mount
view full answer... - Ground Clearance for Curt Front Hitch that Fits 2023 Ford F-250
- The Curt hitch # C31078 is a fit for your 2023 Ford F-250 with the snowplow package. From the bottom of the hitch to the ground would be about 7 inches.
view full answer... - Which Front Hitch Installs Higher for 2020 Ford F-250 Curt or Draw Tite
- I attached pictures that show how the Curt front hitch # C31078 and the Draw Tite # 65076 looks when installed and you can tell that the Draw Tite sits up a bit higher since it comes through relative to the curve in the air dam.
view full answer... - Does Curt Front Hitch # C31078 Fit 2022 Ford F-350 Dually
- Yes, the Curt Front Hitch part # C31078 that you referenced is a confirmed fit for the dually models of the 2022 Ford F-350 diesel.
view full answer... - Front Hitch that Fits 2022 Ford F-350
- Yes we do have a front hitch that fits your 2022 Ford F-350 with the Curt front hitch part # C31078. This installs easily without drilling and has higher capacities at 9,000 lb line pull.
view full answer... - Highest Capacity Front Mount Hitch for a 2019 Ford F-350
- If you are carrying more than 500 lbs on the front of your F-350 then the only front mount hitch that will work is the EcoHitch item # 306-X7904. This hitch has a 1,000 lbs vertical load limit (tongue weight). The Curt item # C31078 only has a 500 lbs limit. Both are confirmed to fit a 2019 F-350.
I have linked an installation video below. I have also attached a picture so you can see what this hitch will look like once installed.
view full answer... - Front Mount Hitch Recommendation for a 2022 Ford F-250 Super Duty
- We do have a front mount hitch for your 2022 Ford F-250 Super Duty! I recommend going with the Curt Front Mount Hitch # C31078 because it has a thicker powder coat than other hitches, which means it will resist the elements better, and it's more concealed as well so you won't have a hitch sticking out really far at the front of your Super Duty.
I'm attaching a sample photo from Curt so you can get a good idea of how hidden the receiver is. It is worth noting that while this does fit
view full answer... - Does Curt Front Mount Hitch # C31078 Affect Ground Clearance On 2018 Ford F-250
- The Curt Front Mount Trailer Hitch Receiver # C31078, which is confirmed to fit your 2018 Ford F-250, will actually sit about level with the air dam on the truck meaning it won't change the ground clearance at all. When installing the hitch you will need to do some fascia trimming so that the receiver protrudes through the panel. I have attached an image of this hitch installed on the F-250 to clarify.
I have also included the complete installation instructions that you can look through.
view full answer... - Dimensions of Curt Front Mount Trailer Hitch Receiver for 2017 Ford F-450
- I went out to the warehouse to take some measurements for you and made a diagram for you to check out with those measurements of the Curt Front Mount Trailer Hitch Receiver # C31078 for your 2017 Ford F-450.
From outside to outside at the widest point the hitch measures 39-9/16" and from outside to outside of its brackets measures 29-15/16". It is also approximately 12-1/2" deep overall and the receiver juts out approximately 7" from the bar.
view full answer... - Front Mount Hitch Fit for 2021 Ford F-350 Dual Rear Wheel
- The Draw-Tite # 65076 front mounted receiver is compatible with all models of the 2021 Ford F-350, including DRW models, according to Draw-Tite. The Curt # C31078 isn't a fit for DRW models.
I've linked to an installation video that you might find helpful.
view full answer... - Is Hitch Pin Hole of Front Hitch # C31078 Behind Air Dam of 2020 Ford F-250
- The hitch pin will end up behind the air dam of your 2020 Ford F-250 when you install the Curt hitch part # C31078 on it. Once cut the air dam is very easy to flex so that you can access the hole as needed.
view full answer... - Front Hitch Recommendation for 2018 Ford F-250
- For your 2018 Ford F-250 the front hitch I recommend is the Curt # C31078 because it's made in the USA and because it mounts high enough that it won't reduce ground clearance.
view full answer... - Front Mount Hitch Receiver for a 2022 Ford F-250 Super Duty Tremor
- Yes, the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" item # C31078 you referenced does fit the 2022 Ford F-250 Super Duty with the Tremor trim package. An added bonus is you won't have to trim as much because the air dam is shorter on the Tremors.
view full answer... - Front Hitch that Fits 2020 Ford F-350 Dually Gas Engine
- I found the answer page that Kyle made about the Curt front hitch # C31078 and found that Kyle did list that this hitch does NOT fit a dually model. Now that said I looked further into why the front hitches don't fit the dually models and apparently it's due to the intercooler being relocated on the dually models. At least for the Draw Tite front hitch # 65076. So since you have a gas engine which does not have an intercooler the Draw Tite front hitch part # 65076 would fit your truck.
view full answer... - Front Mount Hitch for 2021 Ford F-250 Lariat with the Tremor Package
- Yes, the Curt Front Mount Trailer Hitch Receiver, # C31078, is confirmed to fit the 2021 Ford F-250 Super Duty. Please note that because you have the Tremor package the air dam is very short in height compared to the other F-250 trim levels. So, you can disregard the trimming instructions as they are designed for the standard air dam. You only need to notch out the dam a little from the bottom to get a custom fit look.
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Video Edited:
Jacob T
Video by:
Dustin K
Video by:
Jonathan Y
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Test Fit:
Clayton O
Test Fit:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ford F-250 Super Duty Accessories
Product Experts Available Now!
Call 1-800-940-8924
12teachscience
8/7/2023
The front hitch is fine. I would like to emphasize do not follow the instructions on cutting the air dam!