Curt Venturer NEXT Trailer Brake Controller - 1-3 Axles - Time Delayed
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
Part Numbers: C74VV,C51332
Retail:$149.47
Our Price: $103.84
You Save: $45.63
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Curt Venturer NEXT Trailer Brake Controller - 1-3 Axles - Time Delayed
part number: C74VV
A simple LED display and a pinch-trigger manual override make this time-delayed brake controller easy to read and easy to use. Installation is quick and simple with no mounting restrictions. Activates brakes with a preset intensity.
Features:
- Brake controller activates trailer brakes with preset intensity
- Adjustable power output control lets you select the amount of braking force
- Rocker switches located on left front of module for easy access
- 10 Gain settings and 9 load settings allow you to adapt to various driving conditions
- Select a higher setting for harder braking and lower for more gradual braking
- Pinch-trigger manual override is within easy reach for controlling trailer sway or stopping in emergencies
- Simple LED display shows the amount of power output
- Self-diagnostics monitor trailer connection and check for shorts
- LCD display shows power adjustments in 1.0 increments
- Brightness is adjustable for optimal visibility
- Auto-sleep mode prevents battery drain after 5 minutes of idle time
- Quick and easy installation with no mounting restrictions
- No need to mount level - install anywhere at any angle
- Included mounting bracket and hardware designed to hold brake controller flush against the dash
- Plug-in, vehicle-specific brake control adapter (sold separately) available for select vehicles to reduce installation time
Specs:
- Application: trailers with up to 3 axles (6 brake assemblies)
- Compatible with low-volt, PWM, ABS, cruise control, and electric-over-hydraulic trailer brakes
- Dimensions: 4" long x 3-1/8" wide x 1" thick
- Limited lifetime warranty
Gain Adjustment
Gain control lets you set the maximum amount of power that will be applied to your trailer's brakes, adjusting in increments of 1. How much braking output you need is determined by the weight of your trailer; a heavier trailer will need more power to bring it to a stop. You want to go as high as you can without the trailer brakes locking up. Typically, the gain is only readjusted when you experience changing road conditions or if the weight of your trailer changes. To get more power to your brakes, press the left-hand upper rocker switch. To decrease the gain, press the lower switch. When you make your adjustment, the gain setting will show on the LED screen for 5 seconds as a series of bars and then go into sleep mode to reduce drain on the battery.
Load Control
Once you have the gain set, you can fine-tune your braking by adjusting the load control on a scale of 1 to 9. This controls the aggressiveness of your trailer's braking, meaning how quickly the brakes reach the maximum braking level. Load control can get the braking power to your trailer faster and with more intensity so that it doesn't push your tow vehicle forward. If your vehicle takes too long to come to a stop, increase the setting by pressing the right-hand upper rocker switch. If it stops too abruptly, decrease the setting by pressing the lower switch. You can alter the setting to suit your driving preferences or to improve handling based on changing road conditions or varied trailer loads.
Pinch-Trigger Manual Override
The Venturer comes with a easy-to-reach, pinch-trigger manual override, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just push in the trigger. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
LED Display
The LED display on the Venturer is large and easy to read at a glance. It will show you what setting the brake controller is on as well as give you information for troubleshooting. You can adjust the screen brightness or trigger night mode so it won't glare obnoxiously on your dash. Press the control button to cycle through the different modes, shown as a bar - keeping it simple.
Quick Installation
Because inertia plays no role in the functioning of this controller, you do not have to mount the unit at any particular angle. Your mounting options are limitless, so long as you can still easily access the controller and the manual override. The included bracket is designed to mount the brake controller flush to the dash so it takes up almost no space at all.
If your vehicle already has a plug-in brake controller wiring harness, just connect the unit to it. Otherwise, you will need to purchase a vehicle-specific wiring harness (sold separately) to plug into. If a harness is unavailable for your vehicle, hardwiring will be necessary.
Note: If a custom brake control wiring adapter is not available for your vehicle, one of the following will be required:
20-Amp circuit breaker (9506P - sold separately) for 2- to 4-brake applications
30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications
See also etrailer.com's exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
Time-Delayed Braking
The Curt Venturer NEXT comes equipped with time-delayed braking. Every time you apply the brakes in your vehicle, a signal is sent - via the brake switch - to the Venturer. The controller then sends power out to your trailer brakes to activate them with an intensity set by you, at a rate determined by you. Both the amount of braking power (gain) and rate of application (load) can be adjusted to suit your preference, the road conditions, the type of trailer, and the weight of your load. To determine which levels are best for your application, test your towing setup and choose what feels right.
51116 Curt Venturer NEXT Time Based Trailer Brake Control - 1 to 3 Axles
Replaces Curt 51110
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
part number: C51332
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.
Features:
- Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller
- No cutting or splicing required
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible with time-delayed and proportional brake controllers from Curt
- Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses
- 2' Long, 12-gauge wires have protective covering to deter damage
- Limited 1-year warranty
Installation of Curt Brake Controller Adapter
To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the port on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, and it is taped to another harness near the emergency brake pedal.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
51332 Curt Quick Plug Brake Control Adaptor Harness
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Defective
- Alternate product found
- Product did not meet expectations
Customer Reviews
Curt Venturer NEXT Trailer Brake Controller - 1-3 Axles - Time Delayed - C74VV
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In - C51332
Average Customer Rating: 4.7 out of 5 stars (139 Customer Reviews)
A simple LED display and a pinch-trigger manual override make this time-delayed brake controller easy to read and easy to use. Installation is quick and simple with no mounting restrictions. Activates brakes with a preset intensity. Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.by: John 04/13/2024
Installed but not used with a trailer yet, easy instruction and appreciate the extra hardware for the installation.
Compact and not intrusive. Decided to use the adhesive tape included and taped under the dashboard L of the steering wheel.
by: Kory K03/18/2014
2008DodgeRam Pickup
Sorry for the late follow-up. I just wanted to let you know that the brake
controller and wiring harness I purchased through eTrailer worked very well
with my 2008 Dodge Ram 2500 with the Cummins 6.7L diesel. Pictures are
attached for your use, as required.
The trailer was an 18-foot enclosed snow machine tailer with a steel
chassis. I can't remember the empty weight, but it's substantial. We towed
empty and full on dry and snow covered roads from Oklahoma to Colorado and
back. Even with th exhaust brake on my truck, I can't imagine towing this
load through the hills and mountains without a brake controller. It's been
done before, but I would say it's an unnecessary risk given the more than
reasonable prices at eTrailer...it was cheap insurance pulling such a heavy
rig with my family on board.
The controller was definitely not your top-of-the-line model, but the
adjustability and controls were more than adequate for somebody who tows
occasionally. A professional may desire more proportional controls and
adjustability, but not much more. This unit peformed flawlessly.
Thank you for your time. Please feel free to contct me if you would like
any clarification on my statements or pictures.
by: Thomas08/09/2023
It does not fit my vehicle. On the attached photo the connector on the left is the stock dodge plug, the plug on the right is what I just got
by: Robert J. 07/15/2018
2007 DodgeRam Pickup
This item easily plugged into my Curt brake controller and into my truck’s factory plug. Made for a less than 5 minute install; powering up the brake controller with no issues. Convenient is an understatement with this pigtail. Rig is 2007 Dodge Ram 2500 4X4 CTD.
by: Steve T.06/18/2016
1999 DodgeRam Pickup
Perfect fit for my 1999 Dodge Ram. it made installation of the brake controller super easy. I highly recommend paying the extra $** for this item.
by: Tim 09/02/2022
The folks at etrailer are the best! Very helpful and knowledgeable!! The product I received fit perfectly and works great!!
Tim
9/3/2023
Still working great!
by: Jim 02/09/2024
2004 DodgeRam Pickup
y0u want good go to etrailer was a perfect fit
by: Jason 02/23/2024
Slimmer than most of the others. Easy install with the additional pigtail.
by: David H07/31/2017
I ordered a fifth wheel brackets and hitch along with curt brake controller and pigtail. Everything fit great with no problems and the service and shipping was very speedy. Highly recommend etrailer for all your needs.
by: Micah07/18/2022
DodgeRam Pickup
2006 Dodge Ram. Easy install. Plug it in and tie up the wires. I put a wire protector sleeve to cover the wires coming out of the controller.
by: Paul 02/26/2024
Delivered early. Was just what I wanted.
by: Gene 08/14/2023
Almost plug-n-go.The hardest part was where to put the controller !
by: Jesse 12/18/2023
fit and finish was perfect.
by: Jay L04/04/2014
Trailer control shipped quickly, super easy install with the pigtail. Happy customer!
by: Jeff M09/25/2017
DodgeRam Pickup
In hind sight I probably didn't need to order this item. Forgetting how difficult it was to access the connector on my Dodge Ram when I installed my first (now defunct) brake controller, I imagine it will be a greater struggle to get it to disconnect before putting the new one on. So I think what I'll do is cut the Dodge specific connector off the one end, cut the wires off my old controller and splice this pigtail into it, thus eliminating the need to remove the old connector!
Jeff M.
9/25/2018
My splice job worked as planned however I no longer own that vehicle.
by: Mike D07/16/2016
Dodge
I needed an electric brake control for my 2006 Dodge pickup but was having trouble finding one locally that would plug in to the factory installed plug. If it was a Chev or Ford it was in stock and I didn't want a universal that would have to cut into the wiring. I called etrailer to make sure what I saw on their website was correct and they assured me it was so I ordered it. It arrived, I instaled it and it works perfect.
Michael D.
7/16/2017
Still working fine.
by: Larry J Warren04/18/2014
Used in conjunction with the Curt brake controller I purchased from etrailer.
Worked perfectly.
Larry W.
4/18/2015
Works fine No reliability issues, worry free.
by: John 09/26/2023
Fast Shipping! Works great! Easy to ins tall!!
by: Bill09/12/2022
DodgeRam Pickup
The directions on this item are horrible. I finally figured it out and was able to install it onto my Ram 1500, but only after spending hours trying to make everything fit right. If you're looking for a hitch setup to pull a trailer long distances, I would advise you to look at other options. This will work for my short trips with my half-ton pickup, but I would not want to pull anything more than 50 miles with this setup.
by: KEITH09/15/2020
I ordered the Curt TriFlex trailer brake controller. Had to return the first one, due to the manual brake activation lever being sloppy loose. They replaced it with no hassle. It looks cheap but works good so far
by: Robert A.04/21/2017
DodgeRam Pickup
My 07' Dodge Ram Quad Cab had a factory installed receiver hitch and therefore the plug to which this cable attached. However, I had to go to the Curt mfg website to find a picture of the actual truck plug. Once I found the plug which was buried up in a difficult spot to reach, the cable snapped in easily. It is sufficiently long enough to reach the controller cable if one installs the controller anywhere on the knee panel below the steering wheel.
by: H. Miller11/28/2013
Land Rover Discovery II
I ordered a Curt Discovery trailer brake controller. Exactly what I was looking for and for a great price. Transaction was smooth and easy and the controller arrived within a reasonable amount of time. I liked the parcel tracking that showed the progress of my order.
by: Ralph06/27/2023
Worked great performance as described
by: David C05/17/2014
I used this connector with a new brake controller that I also purchased. It was very easy to connect to the controller & truck's electrical system (under the driver's side dash). So far it's working beautifully.
As always, etrailer was excellent with their advice, shipping, and follow-up emails. I have had great experiences with them since 2010.
by: Matt09/25/2014
1997 DodgeRam Pickup
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In - C51332
Item fit exactly and directions was very specific as to where to plug in in. Items were shipped promptly and was as described.
25
139
Show More Reviews Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
- Red Screen on Curt Venturer Trailer Brake Controller
- I checked the owner's manual for the Curt Venturer Trailer Brake Controller part # C51110, a flashing red display indicates that there is a brake circuit overload, likely caused by a short. It really didn't give any other detail aside from this so I first recommend you check to ensure the wires are hooked up correctly. The black wire goes directly to the positive battery terminal, there should be around 12 volts on this wire as it goes into the trailer brake controller. The white wire goes
view full answer... - Brake Controller Installation on 1999 GMC Pickup
- It will depend on which truck you have. 1999 was a split model year for GMC pickups. They offered both the C/K series which was a carryover from the 1998 model or the Sierra which was an all-new body style.
If you have the C/K series, the vehicle isn't prewired for a brake controller. You'll need to begin with a functional 4 pole trailer connector. You can install # 118315 if you don't already have one. Then, to install a 7-way trailer connector and install the brake controller, you'll
view full answer... - No Power To Curt Venturer Brake Controller On 2001 Jeep Grand Cherokee
- You stated that you have your controller all hooked up to your 2001 Jeep Grand Cherokee. It sounds like the power wire has possibly not been connected. When properly installed, the brake controller will still turn on. For you model Jeep, we offer a harness that connects to the back of the brake controller, part # C74VV.
The harness number is part # C51515. The plug connects to the back of the brake controller, and the 4 wires on the other end are hardwired to your vehicle. The black
view full answer... - Troubleshooting Curt Brake Controller Installation in 1990 Chevy Silverado
- If your brake controller is a time-delay type like the Curt Venturer # C74VV it should activate the trailer brakes either when you press the brake pedal or press the manual override lever. But if you have a proportional type controller like the TriFlex # C24VV, which is triggered by inertia (from the motion of your truck) then the brake pedal will activate it ONLY if you are moving. With both types of controller the manual override lever should activate the brakes to the selected power
view full answer... - Curt Venturer Brake Controller Troubleshooting on 2009 Saturn Outlook
- It sounds like you might have an issue with your ground, or you may need to simply reset your brake controller now that it has been installed. Once you turn your vehicle on and the trailer isn't connected, there should be a red light that appears on the controller.
To reset your brake controller, unplug the pigtail harness for about five minutes. After that, plug the harness back into the brake controller.
If resetting the controller doesn't work, try grounding the controller to
view full answer... - Wiring Diagram/Colors for Installing Curt Venturer Brake Controller
- The Curt Venturer part # C74VV uses the standard brake controller wiring colors of white for ground, red for stoplight switch, blue for brake output to trailer connector, and black to 12 volt power.
I also attached a link to the install instructions for this controller for you to check out as well.
view full answer... - Malfunction of Curt Venturer Brake Controller # C74VV Used with Electric-Over-Hydraulic Brakes
- The Curt Venturer Brake Controller # C74VV that you are using is designed for use only with electric trailer brakes. Since you mention a solenoid it sounds like your trailer may be equipped with an electric-over-hydraulic brake actuator. Such a system will not work with the Curt Venturer.
If this is the case you will need to choose another brake controller that has a switchable setting to allow it to be used with EOH brake actuators. Curt offers their Tri-Flex # C24VV that is compatible
view full answer... - Brake Controller Installation on 2013 Nissan Frontier with 4-Pole Flat trailer Connector Installed
- Adding a brake controller to your 2013 Nissan Frontier that already has a working 4-pole flat trailer connector is a simple process that requires only two parts.
First you will need a brake controller installation kit, part # ETBC7. This kit includes everything you'll need, except for the controller itself. The kit includes a 7-way RV-style blade socket, wiring, butt connectors, zip ties, circuit breakers and even a circuit tester to help you find the correct wires on the vehicle. I
view full answer... - Why Isn't Curt Brake Controller Work on 2006 GMC Sierra 1500 After Install
- Under the hood of your 2006 GMC Sierra 1500 there are some connections that need to be made to activate the brake controller wiring. If you check out the help article I attached you can see what you need to do.
view full answer... - Will Installing Brake Controller Void Warranty On 2014 Ram 1500
- There should not be any warranty issues with your 2014 Ram 1500 when installing a brake controller. If a brake controller is properly installed and set up, it will actually save wear and tear on the truck when towing.
If you decide you want to install a brake controller like the Curt Venturer, part # C74VV, I highly recommend installing the Curt Custom Wiring Adapter, part # C51453. This makes installing the brake controller very simple. You just plug one end into the back of the brake
view full answer... - Trailer Brakes Locking Up Even After Adjusting the Settings Per Instructions
- First, you will want to figure out where the problem is occurring. Test the voltage from the brake controller at the vehicle end trailer connector. What you have your brake controller set at is what the voltage should read at the connector. If you are getting more voltage at the connector than what the brake controller set at, you will want to move your troubleshooting to the brake controller. If the voltage is reading correctly at the vehicle end trailer connector, then the problem is
view full answer... - Installing Brake Controller on a 2004 Dodge Ram 2500 that Does Not Have Factory 7-Way
- If your 2004 Dodge Ram 2500 did not come with a factory installed 7-Way trailer connector then you will need to add one using # 37185 (provided that the truck came with a factory 4-Way flat trailer connector).
The blue wire that is output to the trailer connector at the back terminates in a connector located under the driver's side wheel well. you would need to splice into that wire using # 12-1-1 (sold by the foot) wire and route it all the way back to the blue wire of # 37185.
For
view full answer... - Can the Curt Venturer Trailer Brake Controller # C74VV be Hardwired for Installation
- You definitely can hardwire in the Curt Venturer Trailer Brake Controller # C74VV. Simply connect the following wires from the Venturer to the corresponding functions on your tow vehicle:
Blue - 7-Way Output to Trailer
Black - 12V Power
White - Ground
Red - COLD Side of Stop Light Switch (only gets hot when brake pedal is pressed)
The stop light switch wire can typically be found under your dash above and behind your brake pedal. This is a more cost-effective solution, but if you
view full answer... - Parts Needed to Install Brake Controller in a 2009 Kia Sportage with 4-Way
- Yes, the Curt part # C74VV plus the wiring harness # C51515 and the kit # ETBC7 will be all that you need to convert the 4-way of your 2009 Kia Sportage to a 7-Way and install a brake controller.
I attached an install video that shows the ETBC7 installed on a similar Sportage as yours.
view full answer... - Parts Needed to Install Curt Venturer in a 2016 Nissan Frontier 4x4
- All you need to install the Curt Venturer brake controller part # C74VV is the correct install harness, part # C51382 which is a confirmed fit.
I attached an install video for this setup in a very similar 2016 Nissan Frontier as well.
view full answer... - Curt Brake Controller Display Not Showing Power in 2000 Ford F-250
- If the display on the Curt Venturer Trailer Brake Controller part # C74VV is not showing a display at all then it is not getting power from the vehicle battery. It looks like the 2000 Ford F-250 has a brake controller adapter part # C51322 which you are more than likely using. Even with the use of a brake controller adapter the truck may still need fuses and relays to activate the towing package. You will need two 30 amp maxi-fuses in the trailer tow electric brake and trailer tow battery
view full answer... - Troubleshooting Curt Venture Brake Controller that Applies Brakes too Hard
- Sounds like your Curt Venture brake controller part # C74VV is applying your trailer brakes too hard. What you would need to do is lower the sync setting which will allow the brakes to apply less aggressively. The sync setting is the black adjustment knob on the left side of the controller behind the mounting bracket.
The adjustment on the top of the controller is the max power output. If the brakes were locking up you'd need to back this off a bit.
view full answer... - Can Curt Venturer Brake Controller Install in 1998 Jeep Grand Cherokee
- Yes, the Curt Venturer part # C74VV can be used on your 1998 Jeep Grand Cherokee with a factory 7-way.
Next, for a wiring kit to install the brake controller to the 7-way you would want the Wiring Kit for 2 and 4 Brake Electric Brake Controllers # 5506. This will provide the power source and ground for the wiring for the brake controller. You will need to test the wires from the brake pedal switch of your vehicle to find a circuit that has voltage when the brakes are applied and none
view full answer... - Troubleshooting Curt Venture Brake Controller that Doesnt Show Trailer Connected
- The single green light of the Curt Venture part # C74VV indicates that there is no trailer connected but that the controller is ready to be used otherwise.
Is there any corrosion on the trailer connectors of both your tow vehicle and your trailer? That is the most common problem for brake controllers that won't show a trailer connection. Try cleaning them first to see if that fixes the problem.
I attached a help article for you to check out as well with further troubleshooting tips.
view full answer... - Troubleshooting Brake Controller Install 2003 Chevy Silverado 1500HD that Wont Work w Brake Pedal
- Since your truck is a 2003 Chevy Silverado 1500HD you should check the third brake light fuse of the truck. Your generation of GM truck is notorious for this fuse easily blowing and when it does brake controllers will stop working with the brake pedal. An easy way to check this is to see if the third brake light on your truck cab still lights up with the brake pedal.
view full answer... - Where is Brake Controller Adapter Plug Located In 2002 Dodge Ram Pickup
- The green connector in your truck is not the correct plug. It is normally a blue plug like what I have shown in the photo that plugs into the adapter part # C51332 if you are using a Curt brake controller like part # C51170. There will be a port to plug into if the truck came with a factory 7-way plug just to the right of the emergency brake.
If the 7-way plug was installed after-market, you will need to see how far the wires from the plug are extended so you can complete the install
view full answer... - Curt Spectrum Brake Controller Showing no Trailer on 2000 Dodge Ram 2500 After Replacing Connectors
- Yes, you are definitely on the right track. If your Curt Spectrum Trailer Brake Controller # C51170 is still not showing a trailer is connected and you have already replaced the connectors, I think it has to be a short either on the brake wiring or the brake magnets themselves.
Before replacing your brake assemblies entirely, start by just checking the wires to the brake magnets (if you have not done so yet) and look for wires that may be pinched or otherwise damaged and fix as necessary.
view full answer... - Installation of Brake Controller on 1997 Ram 1500 Club Cab with Factory Trailer Plug
- We do appreciate your continued patronage and I think we can assist you with this.
If you can't find the plug and the dealer doesn't offer any help on this, then you can hard wire in the controller to your 1997 Ram 1500, so you will be able to install the controller it'll just be a bit more time consuming. You will need a circuit tester like the # PTW2993 to test wiring functions under the dash, and you may need some butt connectors like the # DW05745-5 to complete your wiring connections.
view full answer... - Quality Trailer Brake Control for a 2006 Dodge Durango
- You are thinking of Tekonsha brake controllers. They are pretty much the leader in the brake controller industry. The Curt controllers would not be my first choice. I prefer Tekonsha controllers because they have a long proven track record of quality and performance. The Curt controllers are a less expensive option but they are new to the brake controller industry. They did have some performance issues initially but they are improving.
I recommend the Tekonsha P2, # 90885. This is a
view full answer... - Curt Brake Controller Recommendation for 2005 Dodge Ram 2500
- The price for the Venturer controller part # C74VV and install harness part # C51332 is tough to beat but a proportional brake controller will be a much better option. Proportional controllers sense how hard you are applying the brakes and apply the trailer brakes the same way. Time-delayed like the Venturer put out a preset amount of braking power so they aren't as effective.
So instead the Triflex part # C24VV with the install harness # C51332 would be the better option for your 2005
view full answer...
Info for these parts were:
Expert Research:
Jameson C
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Test Fit:
Clayton O
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
8/23/2023
Hmm...youll be looking for another white plug like the white harness. Do you know if your truck for sure has the factory tow package?