Part Numbers: TLC2219,TLC3215
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (3192 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Tommy C recommended the TorkLift Camper Tie-Downs. The Instructions are great and very easy to follow. They supply some cool wire helpers to hold bolts in the frame for you. All went very smoothly and a very secure. I love how solid the Camper feels on the truck.
Poor packaging, missing parts and showed up looking used from being beaten in shipping.
I bought this when my previous belly bar and rear tie-down bent badly when our truck slid off the road into a steep ditch and our camper nearly tipped sideways off our truck. This product is a bit better then my old set up, but I expected something much better for this very high price. It wasn't too tough to install, despite the poorly written instructions. Also, the kit did not include a bolt fisher for the 7/16 bolt. The bolt fisher supplied was for a 1/2 inch bolt. Fortunately I had the correct bolt fisher from a previous project. I am also disappointed that the tie down hole has a slot cut in it which seems would significantly weaken it. I am not optimistic that the tie-down point will not bend or break if we have a similar significant side load such as when we slid into the ditch. I will probably weld the slot in the tie-down point shut to strengthen it.
Floyd D.
11/11/2021
They are starting to rust significantly. That is very disappoint considering the very high cost of these. It is interesting that they dont allow pictures of the product for this update.
They are easy to install and work great with the torque lift camper tie-downs.
They are so strong that I use them as a step to reach things in the bed of the truck when the camper is not in the truck.
Could not believe the quick delivery of my tie downs outstanding
Bit of a tricky install because it is a non-drill installation but once done very impressed.
So far so good. They work great. Solid a year later.
I am satisfied with my purchase of the TLC2219 tie down system for my camper. It was installed on my 2014 Chevy diesel. The front set did require two pairs of hands to get the nuts and bolts in place.
I have purchased products from ETrailer a few times. All my experiences have been so positive. First, the phone system is an easy two-button push to place an order. Second, I get a real live person happy to serve their customer. The agent takes time to validate my selection ensuring I am getting the right part the first time. Then I receive a follow-up email to ensure I received the product and there are no issues or concerns. Today, this level of customer service is unheard of. I am 100% sure you too will be treated the same way.
Well if I get the right part customer service on the phone was great the front bolted right on and also air bags
From technical assistance in choosing the correct product, a great price, super fast shipping, and easy to follow directions: Perfect! I needed a quality set of truck camper tie-downs and the reviews pointed to TorkLift. They arrived in 3 days at 1300 and I had them installed by 1500 on my 2019 Sierra Denali 3500 dually. Super easy and strong as nails! Very pleased...
A little on the pricey side but they are heavy duty and well built. They work great and still look new after the first year.
Easy installation
Love these!! Made it feel like I actually had some control over my truck camper!! Before with the bed rail mounts I always felt like it was hanging on by a thread and it rocked and shifted constantly. Now it’s secure and I’m able to get to the boondocking locations I been wanting to get to for my [online] channel. “Work Less Enjoy Life More” ??
Was delivered in two days as promised. Box was beat up but everything was still in it. Parts are way to tough to hurt
Pretty easy for a 73 year old guy to install.
One tip though, on the driver's side install the 1/2x5 bolt with the bolt head to the inside. Gives a little more clearance with the fuel tank. This is opposite of what the directions say.
Thanks Nick for the great service.
Works great
Very well designed and they fit like a glove! Easy install too.
After being told that all 3 items were in stock and that the order would be going out soon. I received a call from etrailer stating that the rear tie downs were not in stock and that they would have them shipped directly from the manufacture. Minor inconvenience but was handled smoothly to correct the problem.
Could not be happier with the quick service I received from etrailer and outstanding product I purchased. The install was a breeze with the easy to follow instructions and I am now able to stay wherever it is I am playing! Thanks for the great prices and good service ??
Installed on 2016 Chevrolet Silverado 2500 HD. Absolute perfect fit on both sides. Thx for all the videos online etc... No joking, I had each on in 15 minutes. One is always apprehensive about fish wires and interior frame bolts. No problem here. I did do one thing different than any thing I read in instructions or saw on the internet. When I removed the top stock box bolt, I hung the unit loosely from the bolt. There was plenty room to move it around and install the frame bolt with the fish wire. Never lifting or holding the unit during this part of the install. Simply inserted the bolt into the frame with wire and hardware then into the the slotted hole of the unit, and added washers and nut. On this unit there's only one interior frame bolt. The other is thru frame. Excellent powder coat. Fantastic packing and boxing. Truly a first class outfitter.
Installed on 2016 Chevrolet Silverado 2500 HD. Excellent powder coating. Super wrapping and boxing. Super fast delivery. Just the best hardware, exact amounts. First rate fish wires. The rear spring perch is more narrow inside than the length of the bolt. Shear panic when I sent in the first one thinking I couldn't it to stand up. No problem, it comes in at an angle hardware and all. Other side just as easy. Rock solid superior application. Less than an hour for both. Worth every penny for the fit up.
Patrick
5/3/2021
Very secure, holding a great payload with confidence.
Easy install on my truck. Simple easy to follow instructions. Work great and my camper feels very secure.
These tie downs, as well as the TLC3215 set, were easy to install if you have some mechanical ability. They function well with our Lance truck camper and become unobtrusive when you remove the tie down extensions. It's too early to comment on corrosion resistance, but my hope is they hold up well.
Ken
2/11/2021
These work great with the front tie downs on my camper. Extensions are easy on and off and have held up well in the Northeast climate.
Fast shipping and delivery even to Alaska. Thanks
Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
TorkLift Accessories
Fit to this rack on your 2016 Chevrolet Silverado 3500
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado 3500 Accessories
Katrina D.
7/21/2023
I am sorry that this showed up in this condition. Let me get you over to our customer service department for them to better assist you.