SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab.

Features:

• Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
• Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
• Electric actuator raises and lowers plow smoothly and consistently
  • Internal clutch prevents damage caused by attempting to under- or overextend the actuator
  • Simple, chain-lifting design has fewer moving parts than a winch
• In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
  • Includes a wireless remote control as an alternative to the toggle switch
• Adjustable, 5-position blade can be manually angled left, right, and straight ahead
  • Manual release handle is easily accessible from front or back of plow
• Terrain-adjustable design for efficient plowing with less tripping
  • Rocking blade pivots up to 6" to allow maneuvering over uneven terrain
  • Trip springs and eyebolts are angled so blade rests on ground at correct angle
• Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
  • Poly scraper blade attachment (SB324-070 - sold separately) allows you to plow over grass or decorative pavement without worry of damage
• Skid shoes let you adjust plow height to prevent blade from digging into the ground
• Strong rubber deflector allows for better visibility by directing snow away from your windshield
• Red visibility markers help you see plow edges so you can steer away from obstacles
• Rugged and durable, all-steel construction
• Black powder coat finish provides corrosion resistance
• Simple installation
  • Slides into your vehicle's 2" front trailer hitch receiver
• ISO certification ensures consistent, quality manufacturing
• Assembly required
• Made in Canada

Specs:

• Application: 2" x 2" front-mounted trailer hitch receiver
• Blade dimensions: 88" wide x 26" tall
• Height adjustment: 9"
• 5 Blade angles:
  • Left 11 degrees
  • Left 22 degrees
  • Straight ahead
  • Right 11 degrees
  • Right 22 degrees
• Distance from bumper: 39"
• Actuator lift capacity: 1,000 lbs
• Weight: 390 lbs
• 1-Year limited warranty

Note: Due to the size of this item it ships via truck freight.

The SnowBear Proshovel conveniently slides into your vehicle's front-mounted trailer hitch for easy, convenient mounting. Smoothly and easily raise and lower the plow from the comfort of your cab with the remote-controlled electric actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping. Being just 39" away from the bumper, the Proshovel snowplow has a compact yet strong and sturdy design.

Simple, Hitch-Mounted Installation

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.

To install the Proshovel snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.

How to Plow

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, 11 degrees to the left or to the right, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.

To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Proshovel.

When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.

Smooth, Controlled Lifting with Electric Actuator

The electric actuator on this plow allows you to lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. To raise the plow, activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. Having fewer moving parts than a typical winch makes this setup less complicated and less likely to break down than other plow lifting and lowering devices. There is also an internal clutch system that prevents damage to the actuator should you try to raise the blade too high or lower it too low.

Add-On Accessories

SnowBear offers a plethora of helpful accessories to make plowing even safer and easier. Along with the available accessories to enhance your snowplowing experience, many parts of the SnowBear Proshovel snowplow are available separately, so you can replace worn-out pieces without having to replace the whole plow.

The off-road halogen light kit (SB324-127) may be necessary if your plow blocks your vehicle's headlights. This kit will light up the way when you're plowing at night or in the early morning. The light kit mounts directly to your plow frame and offers increased visibility when plowing in dark conditions. The 2 bright halogen lights make it easier for you to see where you are going and for others to see you.

With the caster kit (SB324-126), it will be a breeze to move and store the Proshovel snowplow when it's not in use. These wheels mount directly behind the blade and they can be easily folded down for use and up for storage. In addition, these wheels will not weigh the plow down.

The drop extension kit (SB324-128) allows you to use your SnowBear snowplow on your lifted vehicle. With 6" of drop, this bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.

If you are worried about causing damage to your lawn or pathway, the poly scraper attachment (SB324-070) is perfect for replacing the harsh, steel scraper on the Proshovel. The polymer construction is strong enough to still help plow efficiently, but gentle enough to not hurt your lawn or pathway.

324-140 Snow Bear Pro Shovel Snow Plow for 2" Hitches - Electric Actuator - 88" Wide x 26" Tall

Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

• Front-mount hitch provides attachment point for hitch-mounted accessories
  • Winch, spare tire carrier, snowplow, cargo carrier and more
  • No more blindly backing trailer in - just hook it up and drive it forward
• Custom fit is designed specifically for your vehicle
• Easy, bolt-on installation - no welding required
  • Complete hardware kit and installation instructions included
• Lifetime technical support from the experts at etrailer.com
• Gloss black powder coat finish over steel resists corrosion
• Sturdy, square-tube design
• Assembled in USA

Specs:

• Line pull: 9,000 lbs
• Vertical load: 500 lbs
• Gross trailer weight: 5,000 lbs
• Receiver opening: 2" x 2"
• Pin hole diameter: 5/8"
• Limited lifetime warranty

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

31302 Curt Front-Mount Trailer Hitch Receiver