Part Numbers: SB324-081,31302
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.
Features:
Specs:
Note: Due to the size of this item it ships via truck freight.
This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (178 Customer Reviews)
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.How it was received; either is was mail destroyed or UPS did this in the process. No telling what parts are missing, waiting for UPS to come pick this and E-Trailer to send out replacement.
I thought these product would be packaged better from the factory for shipping resilience.
This hitch was very easy to install....I had to trim the lower air dam to fit around the receiver and that gives it a clean neat look.
I didn't like that I had to remove and leave the shields around the tow hooks off. But overall I'm very pleased.
I plan to use this hitch for maneuvering a camper in a narrow spot beside my home, and for a bike rack when towing a camper.
Paul T.
11/2/2017
The Curt front hitch is GREAT!I use it to help move my camper beside my house which is lacking clearance to back in. I will certainly install one on my next truck.
Of the many hitch receivers I have purchased, the front mounted ones have never failed to surprise me of their usefulness! From bike racks, to carrier for coolers, to my chainsaws, gas and oil, they make it work. Recently while cutting wood for a hunting lease engagement, I put a second ball on the front and used it to drive a 16' trailer up a hill to get the wood where it was needed for offloading. Backing it up had resulting in damaged trucks, trailers and numerous attempts. Using the front hitch it was a one and done deal! Love it! I have even used it to pull trees over when felling. I don't have enough fingers and toes to count the uses! If you have ever thought about it, just stop and order! You won't regret it!
I gave this hits only 4 stars since all of the available information indicated it would bolt right on to my 2003 Avalanche 1500 (All Models) with no modification, but it wasn't quite that simple. First off, my Avalanche has the plastic cladding. The end brackets of the hitch push the bottom of the air dam under the bumper down a bit and make it bow out. I had to remove the bracket that secured the air dam to the center of the frame. I mounted the hitch in the upper position since I didn't want it to be so low, and the receiver ends up being 8" back from the bumper facia. I had to order an 8" extension to bring it out past the bumper. Other than that, I'm happy with the hitch. I just wish the fitment guide was a little more specific.
Bryan C.
8/13/2013
Did the hitch still come out under the cladding? Or do u need to make a hole for extension? Thanks Bryan 2004 avalanche with clading
William
8/20/2013
Since I installed the hitch in the upper position, I had to cut a hole through the claddingbumper. This came out near the bottom of the license plate recess. I then use the 8 extension if needed. This brings the receiver out in front of the bumper.
I have a 2006 Silverado 2wd LD truck and mounted a curt front trailer hitch ... I mounted both side plates first without tighten down.. I then mounted the 2" receiver section ... Tightened that down then,finished cranking down side brackets !!!!! Done !!!! However I did have to cut the backside of the tow hooks facia plastic with a jig saw no problem ... I never cut into the cup portion I just cut some of the extra plastic in the back off DONE !!!!!!!
I have had this on my 2005 Chevy Silverado for a year. I have used it to hold a Yakima bike rack once but mostly to carry a large toolbox for camping trips. Easy to install. I kept my plastic air damn on and just cut out a square hole for the hitch.
The shipping was quick. Installed easily. The hitch is visible just below the fascia at the bottom of the bumper. I had a front hitch on my previous truck (Tacoma); also from etrailer. I use the front hitch to move my travel trailer into tight spaces.
Originally, with this recent purchase, I had purchased the incorrect item. All it took was an email from the staff at etrailer. The email contained product return instructions along with an RGA#. I just returned yesterday. This extra customer service made the return process quite simple.
With all my needs regarding hitches, etc. I will always check etrailer first.
Installation extremely easy, line up holes and bolt together, that simple. No trimming required.
Purchase front hitch to park 29 FT. camper at a cramped storage facility. Dropping the camper off now is as easy as picking up the camper.
All parts well packed. Website easy to use, prices are right and easy to track shipment. Would purchase from website again.
Perfect fit, quick and easy installation. Only took 25 minutes by myself. I would highly recommend this hitch. Plan using it for bike hitch, winch, cargo platform, etc.
David
6/24/2021
Fantastic, use it all the time for hauling bikes when I tow my RV
Let first say , working with Emily was great. I had an issue with the first hitch not fitting . She helped me order a new hitch that went without a hitch , no pun intended. New hitch is installed as you can see in the picture. Installation was a snap. Already doing work. Thanks again will buy from you all again.
Better than a snowblower!! Made very well, had it put together and mounted in a couple hours. Used it for two small snowfalls and it worked as expected. Great customer service from etrailer!
Anything I get from etrailer and Curt hitches always works! This front mounted hitch will be no different, providing I can put it on tomorrow if it’s not raining! I will continue to buy here!
Patrick F.
11/13/2022
Still working great as all the hitches I have purchased from Curt have done. I will be buying another for my pickup truck as well!
Trailor hitch receiver not long enuff,warn winch hits bumper. (02 chevy silverado,4 wheel drv,ext cab) had 2 make tube extention w/5/8 pin holes. Not able 2 ride around w/winch attachd, due 2 weight and length. Hav 2 take winch to place of use in bed of truk and then atach 2 mount hitch.
Jenny N.
9/30/2022
I checked and for the 2002 Chevy Silverado 1500 LD I did not have a hitch that would provide a longer receiver opening.
Ashley was very helpful, haven't mounted the hitch yet but did get under their held in place and its going to fit just fine. again thank you much , will do business with you.
Works perfectly, easy to install,I used it yesterday to move my dump trailer through the woods to the wood shed.
My front mount hitch arrived with in days of ordering. I watched the installation instructions video on your site before receiving it and it was a very easy install. Your company deserves 5 gold stars in my book. I'm a very happy customer!!!
I bought a Snow bear personal plow and a separate Curt receiver hitch for the front of my 2012 F250.. after speaking with Erica W. several times due to blunders on my part, all was perfect. Quick delivery, price was right, items are super rugged. The stock photos don't do justice. My plow came in at 350 pounds without the receiver hitch. It's not a cheap toy plow. Get one, they'll fit nearly anything! Thanks Erica!!
Installation was a breeze and easily done with simple hand tools most guys have in the garage. I' 77 and it took a little over an hour. Looks terrific!
I can’t address the installation as the box arrived torn and some of the nuts and bolts were rattling in the box. Now I have to wait for the missing hardware. The hitch itself looks to be high quality and you would think that quality packaging would be a priority. All it would take is a heavy plastic bag wrapped in cardboard to protect the bag of hardware from ripping open in transit.
Product arrived a day early! Recommend this company for all your Trailer needs.
Good hitch, easy installation, fast shi pping.
Mark
10/30/2022
Hitch is great,but Im using it on a snow plow that has stabilizer bars that are supposed to align with the hitch crossmember. Because the hitch itself is mounted on the bottom of the crossmember, they do not align.
fast safe shipping
Excellent product and superior customer service. Instructions indicated it would take a professional an hour to install and a normal guy (me?) 2 hours.....well, I had it installed in an hour and five minutes and only busted one knuckle! Simple install, excellent fit, great shopping experience.
Not much of a photographer...but here are a couple pics
Alun J
Kenmore WA
Works perfectly for accessories on front of truck. I use it for a motorcycle carrier.
Product arrived in a timely manner and was the right fit.. was easier to install than I thought it was going be. Took about 45 minutes. Only gripe is that the bolts that attach to the frame of truck spin even when they are in the metal plate when tightening down. Used a pair of pliers to hold end of bolt while using wrench to tighten. Other than that, exactly what I needed.
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet Silverado Accessories
Katrina D.
7/17/2023
I am sorry to see this arrived in this state. I see that our customer service department has uploaded a claim. Once this is corrected we would appreciate your updated feedback.