For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.

The Opti-Brite LED Work Light #TLL60FB is a 2-wire light with black being power and white being ground. It will wire in to your trailer's existing wiring. As long as the current lights run on 12, 24,…

We do have some options similar to the Optronics Halogen Utility Light #QH16CTS but a little smaller: - Vision X Utility Market Floodlight #XIL-UF32 (456 lumens and measuring 3-1/2" long x…

The Transcom #TCM 21344 TB cross references to the 10-10 seal we offer, part #RG06-090. The seal has a 2.125 inch ID and a 3.376 OD. It's compatible with a 25580 inner bearing.

The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.

The USB Outlet with Waterproof Cap #DG61USBVP requires a 1-1/8" depth without the cap. The cap for the face has a ring that slides onto the shaft and is approximately…

In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along…

The Exterior LED Utility Light part #M337FR has three wires, one for power, one for ground, and one for neutral. I spoke with M-3 and they informed me that the light follows EU Wiring Specifications so the power should be brown, the neutral should…

Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.

The Fusion LED Combination Tail Light Bar #STL264RCB appears to be the closest light we have to your current red stick light. This has the same clear lens with red LED's. It is…

If I understand you correct you have a trailer with separate turn signals and brake lights that aren't functioning properly because you 2013 Ford F-150's trailer…

I reached out to my contact at Diamond and she said that the USB Outlet #DG61USBVP has a 2.1 amp max rating. I have attached a short video review that you can check out as well.